Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V6 LFX Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 07-29-2013, 10:23 PM   #15
JokerAce69
 
Drives: 2011 RS
Join Date: Mar 2011
Location: Mesa,az
Posts: 43
Also wanted to add, once i'm done with the painting how long after until i can reinstall the covers? 24 hours?
JokerAce69 is offline   Reply With Quote
Old 07-30-2013, 05:55 AM   #16
etmx183

 
etmx183's Avatar
 
Drives: 2012 Camaro 2LT RS, 04 Turbo Busa
Join Date: Mar 2012
Location: Baltimore, Maryland
Posts: 1,503
CAI is from Cold Air Inductions you can by it direct from CAI.
About $400.00
http://www.coldairinductions.com/sto...FYuk4AodEj0AKg
__________________
CAI intake, RX catch can, Nitrous Outlet Plate system, RX Ported Throttle body, APEX air scoop, SOLO HFCs, JacFab ported manifold and upper intake isolator, Solo cat back Mach X system, 3.91 gears, Weld RT-S, 1 piece DSS driveshaft Stall convertor by:CIRCLE D

TUNING BY:MagnumForce / HP Tuners
13.407@101.72 N/A 11/21/2015
13.356@104.52 E85 N/A Overkill tune 5/20/2016
HP Tuners /MATT@FSP
12.03@115.69 nitrous
etmx183 is offline   Reply With Quote
Old 07-30-2013, 05:56 AM   #17
etmx183

 
etmx183's Avatar
 
Drives: 2012 Camaro 2LT RS, 04 Turbo Busa
Join Date: Mar 2012
Location: Baltimore, Maryland
Posts: 1,503
I waited 48 hours because of the humidity where I live, you should be OK after 24.

Quote:
Originally Posted by JokerAce69 View Post
Also wanted to add, once i'm done with the painting how long after until i can reinstall the covers? 24 hours?
__________________
CAI intake, RX catch can, Nitrous Outlet Plate system, RX Ported Throttle body, APEX air scoop, SOLO HFCs, JacFab ported manifold and upper intake isolator, Solo cat back Mach X system, 3.91 gears, Weld RT-S, 1 piece DSS driveshaft Stall convertor by:CIRCLE D

TUNING BY:MagnumForce / HP Tuners
13.407@101.72 N/A 11/21/2015
13.356@104.52 E85 N/A Overkill tune 5/20/2016
HP Tuners /MATT@FSP
12.03@115.69 nitrous
etmx183 is offline   Reply With Quote
Old 07-30-2013, 07:03 AM   #18
CamaroIOM12
Jim
 
CamaroIOM12's Avatar
 
Drives: 2013 2SS Camaro Convertible
Join Date: Jun 2012
Location: PA
Posts: 388
I guess the krylon fusion holds up to the heat?
CamaroIOM12 is offline   Reply With Quote
Old 07-30-2013, 12:02 PM   #19
etmx183

 
etmx183's Avatar
 
Drives: 2012 Camaro 2LT RS, 04 Turbo Busa
Join Date: Mar 2012
Location: Baltimore, Maryland
Posts: 1,503
About 6 months so far, it's doing good.

Quote:
Originally Posted by CamaroIOM12 View Post
I guess the krylon fusion holds up to the heat?
__________________
CAI intake, RX catch can, Nitrous Outlet Plate system, RX Ported Throttle body, APEX air scoop, SOLO HFCs, JacFab ported manifold and upper intake isolator, Solo cat back Mach X system, 3.91 gears, Weld RT-S, 1 piece DSS driveshaft Stall convertor by:CIRCLE D

TUNING BY:MagnumForce / HP Tuners
13.407@101.72 N/A 11/21/2015
13.356@104.52 E85 N/A Overkill tune 5/20/2016
HP Tuners /MATT@FSP
12.03@115.69 nitrous
etmx183 is offline   Reply With Quote
Old 07-30-2013, 12:13 PM   #20
CamaroIOM12
Jim
 
CamaroIOM12's Avatar
 
Drives: 2013 2SS Camaro Convertible
Join Date: Jun 2012
Location: PA
Posts: 388
Quote:
Originally Posted by etmx183 View Post
About 6 months so far, it's doing good.
Good to know. Buy the way your paint job looks killer!!!!
CamaroIOM12 is offline   Reply With Quote
Old 07-30-2013, 02:13 PM   #21
Buschman
 
Buschman's Avatar
 
Drives: 2015 1SS 1LE
Join Date: May 2013
Location: North Eastern Michigan
Posts: 404
Did it "crack" like a spider web? If so that usually happens when you spray too heavy of a coat. Spray lighter coats next time, and I usually wait 30 minutes between coats and wipe with a tack cloth or microfiber towel lightly between coats.
__________________
2015 1SS 1LE
Stock for now.........



Buschman is offline   Reply With Quote
Old 07-30-2013, 02:43 PM   #22
vong
 
vong's Avatar
 
Drives: Hazard Yellow Holden VE SV6
Join Date: Sep 2012
Location: Australia
Posts: 60
Quote:
Originally Posted by etmx183 View Post
This is awesome mate. I want to do that to mine. How'd you go about it? Were the covers easy to remove?
vong is offline   Reply With Quote
Old 07-30-2013, 04:32 PM   #23
JokerAce69
 
Drives: 2011 RS
Join Date: Mar 2011
Location: Mesa,az
Posts: 43
Quote:
Originally Posted by Buschman View Post
Did it "crack" like a spider web? If so that usually happens when you spray too heavy of a coat. Spray lighter coats next time, and I usually wait 30 minutes between coats and wipe with a tack cloth or microfiber towel lightly between coats.
No i didn't crack like a spider web. The paint more-so just came apart from one spot while it dried and separated. Anyways, So far so good! After applying the adhesion promoter, I painted it again using the dupli-color and it looks awesome! 3 light coats of adhesion and 3 light coats of dupli-color. I did the fuse box first and now I'm going to do the engine cover.
JokerAce69 is offline   Reply With Quote
Old 07-30-2013, 05:37 PM   #24
Ivan @ Southwest Speed
 
Ivan @ Southwest Speed's Avatar
 
Drives: '15 Z06, '01 NBM SS, '97 SS
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 12,193
All y'all....use the Bulldog Adhesion Promotor on anything that expands, contracts, flexes that you plan on painting.

Cheap, you can get it in a spray can at just about anywhere, and it is an awesome primer.

We use it by the gallons here at SWS.
Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
Old 07-30-2013, 10:00 PM   #25
etmx183

 
etmx183's Avatar
 
Drives: 2012 Camaro 2LT RS, 04 Turbo Busa
Join Date: Mar 2012
Location: Baltimore, Maryland
Posts: 1,503
Covers are very easy to remove about an hour to do both sides. Thanks everyone for the feedback on the photos.

Quote:
Originally Posted by vong View Post
This is awesome mate. I want to do that to mine. How'd you go about it? Were the covers easy to remove?
__________________
CAI intake, RX catch can, Nitrous Outlet Plate system, RX Ported Throttle body, APEX air scoop, SOLO HFCs, JacFab ported manifold and upper intake isolator, Solo cat back Mach X system, 3.91 gears, Weld RT-S, 1 piece DSS driveshaft Stall convertor by:CIRCLE D

TUNING BY:MagnumForce / HP Tuners
13.407@101.72 N/A 11/21/2015
13.356@104.52 E85 N/A Overkill tune 5/20/2016
HP Tuners /MATT@FSP
12.03@115.69 nitrous
etmx183 is offline   Reply With Quote
Old 07-31-2013, 01:45 AM   #26
JokerAce69
 
Drives: 2011 RS
Join Date: Mar 2011
Location: Mesa,az
Posts: 43
Yes covers are super easy to remove.. Heck there are tons of diy's but just might throw mine up.
JokerAce69 is offline   Reply With Quote
Old 07-31-2013, 08:02 AM   #27
vong
 
vong's Avatar
 
Drives: Hazard Yellow Holden VE SV6
Join Date: Sep 2012
Location: Australia
Posts: 60
Quote:
Originally Posted by JokerAce69 View Post
Yes covers are super easy to remove.. Heck there are tons of diy's but just might throw mine up.
Sweet, that'd be great mate.
vong is offline   Reply With Quote
Old 08-01-2013, 01:54 AM   #28
HP Turbine
Boosted
 
HP Turbine's Avatar
 
Drives: 2012 1LT RS... with snails
Join Date: May 2012
Location: North Smithfield, RI
Posts: 1,421
Quote:
Originally Posted by etmx183 View Post


If you are there do the hoodliner too.
Such a sweet hood liner! I love it
__________________

IPS Twin Turbos, Corsa Exhaust, Ported Throttle Body. 461 rwhp 443 rwtq!! *Cameron Hass.ani*
HP Turbine is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:35 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.