Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Flowmaster Exhaust
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis

Suspension / Brakes / Chassis All suspension, brakes and chassis discussions.

Reply
 
Thread Tools
Old 08-30-2013, 01:18 AM   #1
lscamaro


 
lscamaro's Avatar
 
Drives: 2011 CGM Camaro LS A6
Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,091
Pedders Alignment Bolts

Hey guys, just a quick question. I have some pfadt tie rods and the rear pedders z sway bar left to install. I was going to do the install but decided it might be better to wait it out so that I could at least get the pedders camber bolts to dial in the alignment and refrain from having to do it twice. I wanted to know if the toe bolts were needed too? I know most are going to tell me to just get them but I really really don't want to spend money if I don't have to. If I can dial in toe without them, I'd rather spend the money to buy their Street 1Z kit . I have been told that the camber bolts are definitely recommended because of the limited amount of camber adjustment and the even more limited amount of camber adjustment once lowered. So I'll be getting those for sure since I'm lowered.
__________________

Click Picture for Build Thread
lscamaro is offline   Reply With Quote
Old 08-30-2013, 09:52 AM   #2
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,066
All I did was the camber bolts. I haven't had mine out to the track since installing them though.

Do you plan on doing Auto-X or Road race? If so, how often.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 08-30-2013, 12:11 PM   #3
lscamaro


 
lscamaro's Avatar
 
Drives: 2011 CGM Camaro LS A6
Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,091
A track day maybe once or twice a year and autocross a little more often. If camber bolts only are fine, I'll just do that
__________________

Click Picture for Build Thread
lscamaro is offline   Reply With Quote
Old 08-30-2013, 11:24 PM   #4
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,066
That's about what I've been doing.

IMO if you're not all out racing to compete and are just having fun like me, then camber bolts and a good alignment is probably all you need.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 08-30-2013, 11:49 PM   #5
lscamaro


 
lscamaro's Avatar
 
Drives: 2011 CGM Camaro LS A6
Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,091
Quote:
Originally Posted by caverman View Post
That's about what I've been doing.

IMO if you're not all out racing to compete and are just having fun like me, then camber bolts and a good alignment is probably all you need.
Cool, that's all I wanted to know. Just wanted to make sure I didn't need them and then have to go back and get another alignment because I didn't buy them in the first place
__________________

Click Picture for Build Thread
lscamaro is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.