Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
JDP Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8

Forced Induction - V8 V8 Supercharger, turbo, nitrous discussions

Reply
 
Thread Tools
Old 09-06-2013, 11:52 PM   #1
sliding
 
Drives: 2010 SS/RS Camaro.1956 Chevy
Join Date: Aug 2011
Location: New Zealand
Posts: 20
ID850s to suit KB 2.8lc ?

Hi I am trying to find which spacers and which diameter ID850 injectors I need to suit the KB supercharger on my car. As the 60lb Siemens injectors are at 70% duty cycle and I'm about to install a texus speed blower cam which I'm sure will take them over the 80% thresh hold. Part numbers would be great. Thanks
sliding is offline   Reply With Quote
Old 09-07-2013, 12:43 AM   #2
sting808

 
Drives: 4 wheels
Join Date: Apr 2009
Location: Honolulu, Hawaii
Posts: 789
Quote:
Originally Posted by sliding View Post
Hi I am trying to find which spacers and which diameter ID850 injectors I need to suit the KB supercharger on my car. As the 60lb Siemens injectors are at 70% duty cycle and I'm about to install a texus speed blower cam which I'm sure will take them over the 80% thresh hold. Part numbers would be great. Thanks
My 2.8LC was running near 78% with the 60lbs siemen deka. You need ID1000s for KB fuel rails. They are sized with the correct spacers to fit the KB and taller height fuel rail applications, but double-check with your vendor and ID. Duty cycle almost cut in half and FP is solid. I would've paid extra for these in the kit had I known they would be so much better than the Deka's. You don't notice it until you live with both and see the long term differences. If I had a rough idle cam, maybe it would've been not as noticeable, but OE like driveability is great.

Last edited by sting808; 09-07-2013 at 01:26 AM. Reason: info clarification
sting808 is offline   Reply With Quote
Old 09-08-2013, 07:11 PM   #3
sliding
 
Drives: 2010 SS/RS Camaro.1956 Chevy
Join Date: Aug 2011
Location: New Zealand
Posts: 20
Can you look at this link http://www.injectordynamics.com/ID1000.html
and down the bottom it shows all the different ones available. Can you tell me which part number I want?

Thanks
sliding is offline   Reply With Quote
Old 09-09-2013, 12:14 AM   #4
sting808

 
Drives: 4 wheels
Join Date: Apr 2009
Location: Honolulu, Hawaii
Posts: 789
Contact an authorized reseller. They will order the correct one for the KB. If ID sells direct, contact them for correct application. I bought mine from JRE, a forum sponsor and they ordered it for me.
sting808 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.