Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Circle-D
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 09-10-2013, 01:41 PM   #57
Nitroman28

 
Nitroman28's Avatar
 
Drives: 2010 Camaro SS 416/4L80
Join Date: Oct 2010
Location: Arkansas
Posts: 1,833
Quote:
Originally Posted by Crime2 View Post
I run Boost Juice, 51% water / 49% meth. I have the AEM kit and it sucks so my iAT are still up there. Going to get the Alky Control setup real soon.


Sent from my iPhone using Tapatalk. If it is spelllled wrong, deal with it.

If the AEM kit is not helping the Alky kits not going to change anything. Sounds like you need a bigger nozzle. I use the AEM kit and it will spray more then i need.
Nitroman28 is offline   Reply With Quote
Old 09-11-2013, 07:55 AM   #58
Matt @ FSP
 
Matt @ FSP's Avatar
 
Drives: 2011 Camaro SS
Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,613
100% methanol on all of our cars. At the big power levels the water is pretty much useless, we want the octane. I can still lower 60-80* of IAT (Depending on ambient) with straight 100% methanol, and you have the octane benefits of the methanol. The methanol is your detonation suppressant. Been using the Alky Control kits for 10+ years now on the LSx, their pumps will only handle 100% methanol the way it should be.

AEM kit you cannot run more than 50% mixture. Plus that controller is far from a PAC controller. I use a lot of AEM components do not get me wrong, but for the methanol kits we refer direct to Alky Control as that is the main focus of Julio's business and he is damn good at it
Matt @ FSP is offline   Reply With Quote
Old 09-12-2013, 08:02 PM   #59
PIGSMOKR
2010 Lingenfelter SS
 
PIGSMOKR's Avatar
 
Drives: 2010 lingenfelter ss
Join Date: Sep 2013
Location: leland nc
Posts: 482
Heres my question on the subject im gonna be at about 725 rwhp and want tthe methenol kit for when im beating on the car a lot or when im at the drag strip for cooling and power my tuner said 50/50 mix. But if I drive my car daily and dont want to be spraying it all the time and u know it has to be tuned for it. So is there a box or a switch that will allow my car to be tuned for it and then switch the tune back to no meth when im driving it?
PIGSMOKR is offline   Reply With Quote
Old 09-12-2013, 08:04 PM   #60
PIGSMOKR
2010 Lingenfelter SS
 
PIGSMOKR's Avatar
 
Drives: 2010 lingenfelter ss
Join Date: Sep 2013
Location: leland nc
Posts: 482
I should add I was gonna get the snow kit for gm cars
PIGSMOKR is offline   Reply With Quote
Old 09-15-2013, 04:34 PM   #61
sprayedv
 
Drives: 2012 CTS-V, 2010 Camaro SS
Join Date: Sep 2013
Location: Infront of you
Posts: 263
Stay away from Snow. Get an Alky system.

Run 100% meth. It's the best combo there is for cooling and power. People who say otherwise are either in denial or simply don't know what they are talking about.
__________________

2012 CTS-V: Cosmetic Chute.
sprayedv is offline   Reply With Quote
Old 09-15-2013, 06:27 PM   #62
Detoxx03
ЯєŧąяĐ Єlímíиąŧ°я Ö
 
Detoxx03's Avatar
 
Drives: 2008 Corvette
Join Date: Oct 2010
Location: Woodward Avenue
Posts: 856
Quote:
Originally Posted by sprayedv View Post
Stay away from Snow. Get an Alky system.

Run 100% meth. It's the best combo there is for cooling and power. People who say otherwise are either in denial or simply don't know what they are talking about.
__________________

D1SC Procharger 881/773 on E85
A Futral Motorsports Creation
https://www.facebook.com/DetoxxAtomic
Detoxx03 is offline   Reply With Quote
Old 09-15-2013, 10:58 PM   #63
grocerygetter
instigator
 
grocerygetter's Avatar
 
Drives: Black on black 2009 C6
Join Date: Jan 2010
Location: 72034
Posts: 3,966
Yup!
__________________
-John S.

2014 GMC CC Z71, 2009 C6 vette (672/639 at the wheel and less than 3300lbs)
2010 Camaro 2ss/rs---SOLD 4/15/14
-654whp with a few cosmetic things, Pfadt suspension, Vortech, CircleD, GPI ss3 vvt bump stick, gears, stuff in between,18" TSW N'rings for drag duty, 20" Forgestar F14s for street.

Thanks to:
Tony@ dv8motoring
rhino@ Gwatney Chevrolet/GPI Jacksonville AR
TCAudio in Benton AR
grocerygetter is offline   Reply With Quote
Old 09-16-2013, 04:05 PM   #64
East Coast Supercharging

 
East Coast Supercharging's Avatar
 
Drives: 8 second C5 Drag Car, C6 Road racer
Join Date: Sep 2009
Location: Cream Ridge, NJ 609-752-0321
Posts: 763
100% methanol.


Just an FYI, boost juice is 51% water mainly so they can ship it.
East Coast Supercharging is offline   Reply With Quote
Old 09-16-2013, 05:29 PM   #65
PIGSMOKR
2010 Lingenfelter SS
 
PIGSMOKR's Avatar
 
Drives: 2010 lingenfelter ss
Join Date: Sep 2013
Location: leland nc
Posts: 482
awsome thanks, now do i have to run it all the time? i drive it daily and i know i have to tune the car for it but i really only want it when im at the track or what not. is there a switch or something to go from one tune to the other?
PIGSMOKR is offline   Reply With Quote
Old 09-16-2013, 05:52 PM   #66
No_Traction_B
 
No_Traction_B's Avatar
 
Drives: 2010 Camaro SS D1SC
Join Date: Nov 2012
Location: CRESTVIEW
Posts: 133
most kits have a boost switch. it only comes on durring boost or aka getting on it. so why would you only want it for track use andnnot street. make it all rhe time and have your foot as the on off switch.
No_Traction_B is offline   Reply With Quote
Old 09-16-2013, 07:29 PM   #67
quincy speeder
 
Drives: 2011 Camaro SS
Join Date: Sep 2012
Location: Quincy.Ma
Posts: 202
Been running meth for years on my vette and about a year on my camaro. Julio's kit just works. They get daily driven often with long trips. Normal driving it will use nothing. Both cars are tuned off it for the full benefit.
__________________
2010 SS, 230 Cam, ARH headers,Airaid intake, 160 t-stat,3.90 gears 475hp/430tq. -old setup
added- Procharger F1-D, alky control,FIC 96lb,fuel system- 810hp/735tq- 10.3 at 136mph , 1.75 60'. see how long it lasts.
Thanks to Slowhawk Performance.

2008 C6, 427ci,YSI,mcleod clutch,Alky control, built tranny, custom fuel system. 985rwhp, best 1/4 -9.4 at 152mph. still trying to get the shifting down:(
quincy speeder is offline   Reply With Quote
Old 10-19-2013, 11:55 PM   #68
the rich dude

 
Drives: Getting 2010 Camaro
Join Date: Jul 2008
Location: Vancouver
Posts: 1,154
a little late to the party but meth definitely cools better than water. yes water cools, yes water helps with detonation because it doesn't burn. BUT meth cools more, no if ands or buts about it!!

A few years back when were were playing with my buddies Pro 5.0 running C16, 50 pounds of Procharger Boost and the biggest baddest air/water intercooler available. We did stuff no one should ever do!!! Of course we ran ice and water, tried different ice cube sizes until we found the optimum size that provided the most cooling all the way down the track!

Then the last few track outings before we switched the whole project to alcohol injection and no intercooler we decided to try running alcohol and ice in the intercooler needless to say very dangerous having alcohol in a intercooler sitting right next to the passenger but we did it anywase coolest we could ever get our intercooler with just water and ice was 32-35 degrees. With alcohol we could get it down to low 20's, frost all over the intercooler. At the end of our 6.60 passes we were still roughly 10+ degrees cooler on the IAT's.... alcohol for the win

Last edited by the rich dude; 10-20-2013 at 02:46 AM.
the rich dude is offline   Reply With Quote
Old 10-20-2013, 10:50 AM   #69
MANNYS2SS/RS

 
MANNYS2SS/RS's Avatar
 
Drives: 2010 Camaro 2SS/RS,LS3
Join Date: Oct 2010
Location: South Florida
Posts: 1,160
Quote:
Originally Posted by sprayedv View Post
Stay away from Snow. Get an Alky system.

Run 100% meth. It's the best combo there is for cooling and power. People who say otherwise are either in denial or simply don't know what they are talking about.
I wish I had bought an Alky system to run 100% meth. I believe my Snow Stage-3 pump and hoses can't handle the 100 % meth.. I think the rust issue, I had with the steel intake pipe was from running 50/50. http://www.camaro5.com/forums/showthread.php?t=319342
__________________

LS-3, ProCharger D1SC
665. rwhp /562. rwtq @ 9.3 psi
MANNYS2SS/RS is offline   Reply With Quote
Old 10-20-2013, 11:31 AM   #70
the rich dude

 
Drives: Getting 2010 Camaro
Join Date: Jul 2008
Location: Vancouver
Posts: 1,154
U would still get some rust with 100% methanol as it's hydrophobic. Prolly not quite as bad though.....
the rich dude is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:31 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.