Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis


Reply
 
Thread Tools
Old 10-12-2013, 09:20 AM   #15
GbrilliantQ
¡ʇuɐıןןıɹq
 
GbrilliantQ's Avatar
 
Drives: 2011 Camaro IOM 2SS/RS
Join Date: Dec 2010
Location: Decatur, Illinois
Posts: 2,598
Quote:
Originally Posted by lscamaro View Post
How do you have it setup so you can adjust the rears? Also, what's your current drop?
I drilled out two holes for the extenders to come through. Added a nice rubber grommet on both sides and it gets covered by the carpet. I haven't decided if I want them to extend through the carpet yet. Oh and also I did the entire install myself in my driveway on jackstands. Pretty easy stuff.

From my Note
__________________
GbrilliantQ is offline   Reply With Quote
Old 10-12-2013, 09:38 AM   #16
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,112
Like this....Mike @ Whiteside did my install and cut the wholes for me. 2" round wholes and some 2" desk gromets from Lowes glued in works perfect.

Some people freak on cutting holes in their trunk. It didn't bother me. It's not big enough of a whole to cause structural issues. If you're super concerned about it you could keep the pieces that get cut out and have them welded back in some day.
Attached Images
     
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 10-12-2013, 07:11 PM   #17
lscamaro


 
lscamaro's Avatar
 
Drives: 2011 CGM Camaro LS A6
Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,310
Quote:
Originally Posted by GbrilliantQ View Post
I drilled out two holes for the extenders to come through. Added a nice rubber grommet on both sides and it gets covered by the carpet. I haven't decided if I want them to extend through the carpet yet. Oh and also I did the entire install myself in my driveway on jackstands. Pretty easy stuff.

From my Note
How hard is it to DIY? Suspension is the only component I'm scared to do myself because I don't want to end up with a botched install and miserable ride. Well at least springs/coilovers. I've done my front sway and trailing arms myself.

Quote:
Originally Posted by caverman View Post
Like this....Mike @ Whiteside did my install and cut the wholes for me. 2" round wholes and some 2" desk gromets from Lowes glued in works perfect.

Some people freak on cutting holes in their trunk. It didn't bother me. It's not big enough of a whole to cause structural issues. If you're super concerned about it you could keep the pieces that get cut out and have them welded back in some day.
I'm not concerned at all about drilling the holes. I'd much prefer that than no holes so I can adjust the coilovers easier. Just want input from others that they're worth the money
__________________

Click Picture for Build Thread
lscamaro is offline   Reply With Quote
Old 10-13-2013, 01:48 AM   #18
bkscott

 
bkscott's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Dec 2009
Location: Grand Prairie, Texas
Posts: 1,544
Well I am closing in on 40K with mine. And They seem to have gotten better with age. I daily drive mine about 60 miles per day and still enjoy them today as much as I did when they were 1st installed.

I have the BC Racing also bought and installed by Mike @ Whitesidecustoms.
__________________
94 Firebird Formula (Drowned 08/30/05)
2010 IBM 2SS/RS 6M Arrived 3/25/10.

ADM CAI, Borla Type S Cat Back, VMAX Ported TB, LG Short Throw Shifter, BC Racing Coilovers, Hotchkis Sway Bars, Whiteline Cradle Bushings, Custom Powdercoated ZL1's ,Nitto Motivos, Stainless Power Headers, Solo J Pipes, AAC LED Sidemarkers, ZL1 Rockers, SLP Splitter, ADM Stage II Cam,ZL1 Diffuser,Vitesse Throttle Controller.

bkscott is online now   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:51 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.