Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis

Suspension / Brakes / Chassis All suspension, brakes and chassis discussions.

Reply
 
Thread Tools
Old 10-12-2013, 01:14 PM   #1
rjames
 
rjames's Avatar
 
Drives: 2012 45th 2ss
Join Date: Aug 2013
Location: Iowa
Posts: 80
Clunking after bush install Help!

Ok got my car back after I had the cradle bushings and the diff bushings installed. Now over a rough road I have a clunking noise and it seems to be coming from the drivetrain. I also noticed a clunking noise when I went to back up the car out of the drive. Anyone had this happen to them. It seems everything is tight and in line. Also the alignment is spot on also. Driving me crazy.

Pedders bushings 1201's cradle
and ep1167HD's Diff
__________________
2012 45th M6 Coupe, Stock internals,Cam/springs,ARH 1 7/8 cat delete,Flowmaster american thunder Cat back, 3:91 gears and K&N Cold air kit. 464 RWHP 434 TQ.Acs body kit,Bmr 1" springs,Vfn copo hood going on soon! Tuned by Speed Inc.
rjames is offline   Reply With Quote
Old 10-13-2013, 01:58 PM   #2
rjames
 
rjames's Avatar
 
Drives: 2012 45th 2ss
Join Date: Aug 2013
Location: Iowa
Posts: 80
Just took it out for another drive and now realize that something seems to be shifting around . I mean when I let the clutch out in forward or reverse I get the same noise as when driving. i also don't seem to get it while the clutch is out and pressure is on the rear . But I do get it when the car is coasting over bumpy roads.
I am wondering do the stock bolts fit snugly in the new sleeves of the pedders ferule in the new bushings? I did not do this so I did not take it apart so am not sure. If I sit in the drive with the e-brake on and let the clutch out and in and rock the car a bit i get the noise so it seems like something is moving around. I did check all the bolts and everything is very tight.
Just fustrating!
__________________
2012 45th M6 Coupe, Stock internals,Cam/springs,ARH 1 7/8 cat delete,Flowmaster american thunder Cat back, 3:91 gears and K&N Cold air kit. 464 RWHP 434 TQ.Acs body kit,Bmr 1" springs,Vfn copo hood going on soon! Tuned by Speed Inc.
rjames is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.