Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Anthony @ LG Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V6


Reply
 
Thread Tools
Old 01-15-2014, 08:01 PM   #141
Lil' Nasty
[COTW 4/13/15]
 
Lil' Nasty's Avatar
 
Drives: Supercharged V6
Join Date: Jul 2010
Location: Florida
Posts: 5,513
Quote:
Originally Posted by Black Knight View Post
Hey Alex r u going to run two cans ? The elite and 1le
Yes sir, I'm routing it like I mentioned a few posts above. Buying the separator soon.
__________________
Lil' Nasty is offline   Reply With Quote
Old 01-16-2014, 08:58 AM   #142
Nutbutt


 
Nutbutt's Avatar
 
Drives: 2011 RJT 2LT/RS Convertible
Join Date: Nov 2009
Location: Western Massachusetts
Posts: 3,386
Quote:
Originally Posted by Black Knight View Post
Would your car stall sumtimes before you replaced your catch can ?

I never put the IPF can on the car. Once I saw the pinched gasket I got a custom one from saikou Michi. I did start with the IPF routing but have changed to a more traditional PCV setup. I just got an RX 1LE separator and am going to route this in to finish the setup.
I do have a dip in the idle when coming to a stop but not enough to stall.
__________________
1st IPF Supercharged 2011 2LT/RS RJT Convertible
Nutbutt is offline   Reply With Quote
Old 01-16-2014, 10:39 AM   #143
Sikoriko

 
Sikoriko's Avatar
 
Drives: 2011 V6 IOM
Join Date: Jul 2012
Location: San Diego
Posts: 1,388
Anybody thing of installing a short piece of clear tygon tubing to see what is going through the system?
Sikoriko is offline   Reply With Quote
Old 01-16-2014, 11:49 AM   #144
Lil' Nasty
[COTW 4/13/15]
 
Lil' Nasty's Avatar
 
Drives: Supercharged V6
Join Date: Jul 2010
Location: Florida
Posts: 5,513
Quote:
Originally Posted by Sikoriko View Post
Anybody thing of installing a short piece of clear tygon tubing to see what is going through the system?
No, haven't thought of doing it but it's a good idea.
__________________
Lil' Nasty is offline   Reply With Quote
Old 01-16-2014, 01:36 PM   #145
MagnumForceGB


 
MagnumForceGB's Avatar
 
Drives: Fastest 2010 Camaro V6
Join Date: Apr 2010
Location: Newcastle, OK
Posts: 3,119
I've taken one of the lines off and used Adam'sidekick blaster to clean it out... Looked like diarrhea coming out the end, water and brown oil... That crap gets sucked in by the supercharger, intake manifold had pools of oil in it.
__________________
Camaro V6 = 11.752 @ 117.27
MagnumForceGB is offline   Reply With Quote
Old 01-16-2014, 02:03 PM   #146
Ventmaster

 
Ventmaster's Avatar
 
Drives: 2017 1SS 6spd
Join Date: Jan 2011
Location: Utah
Posts: 2,069
When you guys arrive at the best solution (Elite+1LE is sounding good), please provide a dumbed-down, step by step, check valve position and #, "How To" for me and any other confused by-standers?

We'd really appreciate it a lot!
Thanks !
Ventmaster is offline   Reply With Quote
Old 01-16-2014, 02:26 PM   #147
MagnumForceGB


 
MagnumForceGB's Avatar
 
Drives: Fastest 2010 Camaro V6
Join Date: Apr 2010
Location: Newcastle, OK
Posts: 3,119
I'm taking my intake manifold off tonight to reinstall my plenum spacer so I will be seeing how much oil is being ingested by the clean side. I have my clean side running straight to the supercharger tube with just the beer can inline. If it has oil I may see about a 1LE separator.
__________________
Camaro V6 = 11.752 @ 117.27
MagnumForceGB is offline   Reply With Quote
Old 01-16-2014, 02:51 PM   #148
Lil' Nasty
[COTW 4/13/15]
 
Lil' Nasty's Avatar
 
Drives: Supercharged V6
Join Date: Jul 2010
Location: Florida
Posts: 5,513
Quote:
Originally Posted by MagnumForceGB View Post
I've taken one of the lines off and used Adam'sidekick blaster to clean it out... Looked like diarrhea coming out the end, water and brown oil... That crap gets sucked in by the supercharger, intake manifold had pools of oil in it.
Wow, cant believe i didnt think of that a new hose is always a solution for anal people like myself but i'll try that, thanks!

Let us know what you find in your manifold.

Quote:
Originally Posted by Ventmaster View Post
When you guys arrive at the best solution (Elite+1LE is sounding good), please provide a dumbed-down, step by step, check valve position and #, "How To" for me and any other confused by-standers?

We'd really appreciate it a lot!
Thanks !
I hope with the set up im planning to do, it will be one of the best solutions. As I'm sure with set ups like Magnum and Sycraft, those are also great set ups.

I'll definitely write down my set up, and make sure it's clear to all.
__________________
Lil' Nasty is offline   Reply With Quote
Old 01-16-2014, 04:38 PM   #149
Black Knight

 
Black Knight's Avatar
 
Drives: Supercharged LLT
Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,324
Quote:
Originally Posted by Ventmaster View Post
When you guys arrive at the best solution (Elite+1LE is sounding good), please provide a dumbed-down, step by step, check valve position and #, "How To" for me and any other confused by-standers?

We'd really appreciate it a lot!
Thanks !
Haha don't wry ur not alone confused bystander here lol
__________________
CLICK IMG FOR BUIlD THREAD
Black Knight is offline   Reply With Quote
Old 01-16-2014, 09:13 PM   #150
KMPrenger


 
KMPrenger's Avatar
 
Drives: 16 SS Camaro, 06 Colorado
Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 12,265
Quote:
Originally Posted by Ventmaster View Post
When you guys arrive at the best solution (Elite+1LE is sounding good), please provide a dumbed-down, step by step, check valve position and #, "How To" for me and any other confused by-standers?

We'd really appreciate it a lot!
Thanks !
I thought Magnum had a pretty dang good sounding setup. If I had the IPF, I'd probably be contacting him.

Or Sycraft!
__________________
2016 Camaro 1SS - 8-speed - NPP - Black bowties
2010 Camaro 1LT V6 (Sold. I will miss her!)
KMPrenger is offline   Reply With Quote
Old 01-16-2014, 09:56 PM   #151
MagnumForceGB


 
MagnumForceGB's Avatar
 
Drives: Fastest 2010 Camaro V6
Join Date: Apr 2010
Location: Newcastle, OK
Posts: 3,119
Quote:
Originally Posted by Lil' Nasty View Post
Wow, cant believe i didnt think of that a new hose is always a solution for anal people like myself but i'll try that, thanks!

Let us know what you find in your manifold.



I hope with the set up im planning to do, it will be one of the best solutions. As I'm sure with set ups like Magnum and Sycraft, those are also great set ups.

I'll definitely write down my set up, and make sure it's clear to all.
The intake manifold was pretty clean, but I had cleaned it out 1.5 tanks of gas ago. Probably not enough to really get it dirty. Going to be a pain to check it next time, I RTV'd the spacer to the manifold and cover, no leaks but will be tough to get off.

Kinda curious as how the 1LE seperators will work with our superchargers.
__________________
Camaro V6 = 11.752 @ 117.27
MagnumForceGB is offline   Reply With Quote
Old 01-16-2014, 10:33 PM   #152
Lil' Nasty
[COTW 4/13/15]
 
Lil' Nasty's Avatar
 
Drives: Supercharged V6
Join Date: Jul 2010
Location: Florida
Posts: 5,513
Glad and good to know...hopefully the separator will make a difference. It's a Pita to take off the silicone tubing on the SC inlet...

Will be getting it soon like I said, buying it slightly used from a member
__________________
Lil' Nasty is offline   Reply With Quote
Old 01-27-2014, 09:42 PM   #153
Lil' Nasty
[COTW 4/13/15]
 
Lil' Nasty's Avatar
 
Drives: Supercharged V6
Join Date: Jul 2010
Location: Florida
Posts: 5,513
Got the 1LE Separator today, will need to get a couple of reducers for the new catch can and seperator.
__________________
Lil' Nasty is offline   Reply With Quote
Old 04-08-2014, 12:25 AM   #154
Lil' Nasty
[COTW 4/13/15]
 
Lil' Nasty's Avatar
 
Drives: Supercharged V6
Join Date: Jul 2010
Location: Florida
Posts: 5,513
Haven't updated this in awhile but have a few mods to install. Ordered CTS-V front calipers and SS rears. Still need to get some Brake lines, fluid, and pads. Should be ready before I buy some new rims and tires.
__________________
Lil' Nasty is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:16 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.