Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Classic Industries
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Members Classifieds - Parts for sale or wanted > Audio / Visual / Electronics/ Gauges / Nav

Audio / Visual / Electronics/ Gauges / Nav Audio / Visual / Electronics/ Gauges / Nav

Reply
 
Thread Tools
Old 01-29-2014, 04:55 PM   #1
tonyG
 
Drives: 2011 2SS/RS
Join Date: Sep 2013
Location: Kentucky
Posts: 26
Alpine PDX 1.1000 *1,000 watt amp* FOR SALE

I have an Alpine PDX 1.1000 amp. This amp was in my previous vehicle pushing a JL audio 13w7. This amp had minor blemishing on the exterior and was sent to alpine for repair. Im friends with a local audio store owner and we sent it to alpine marked -inoperable- so they would completely disassemble the unit and inspect it and repair if necessary. we didnt think they would actually fix the exterior but they did and completely repaired it . So what I have is a completely new refurbished Alpine PDX 1.1000 from alpine.
Asking $400.00 OBO
Name:  IMG_0233.jpg
Views: 210
Size:  105.4 KBName:  IMG_0234.jpg
Views: 147
Size:  129.2 KBName:  IMG_0235.jpg
Views: 148
Size:  73.0 KBName:  IMG_0236.jpg
Views: 150
Size:  129.6 KB
the only reason it was sent to alpine was due to the cosmetic issues and i didn't think they would fix that but they did. meanwhile i bought a PDX M12 (second gen PDX) and ended up with two amps, this one has never been used since i got it back from alpine. Paid 195 to have alpine fully service the amp.

more info from alpine

SPECIFICATIONS

CEA-2006 Power Ratings
CEA-2006 Power Rating: (4/2 I? @14.4V Ƈ%THD+N), S/N 80dBA, ref:1W into 4 I?) 1000W x 1
RMS Power Ratings
Per channel into 4 Ohms: (@14.4V Ƈ%THD+N, 20Hz - 200Hz) 1000W x 1
Per channel into 2 Ohms: (@14.4V Ƈ%THD+N, 20Hz - 200Hz) 1000W x 1
Sound Tuning
Crossover: Variable, 50Hz - 200Hz (-24dB / oct), Low-Pass
Dimensions
Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm
Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2-7/16''
General
Power Requirements: 14.4V DC (11V to 16V)
Input Sensitivity: 0.1V to 8.0V (For Rated Power)
Frequency Response: 20Hz - 200Hz (20Hz/-3dB)
Speaker Impedance: 4 or 2 I?
Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4I?) 80 dBA
FEATURES

Install
Connectors: Quick Disconnect Terminals
Terminal Layout: One-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
Mounting Design: Easy Stacking
General
Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Thermal Control: Thermal Management Control
Power Supply: Resonant Mode Power Supply
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: STAR Ciruit
Current Protection: Auto Over-Current Protection
Power Indicator: Top Mounted Blue LED Power/Status Indicator
RCA Output: Non-Fading Pre-Amp Output
Crossover: Adjustable Low-Pass
Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
Pre-Amp Stage: Discrete
Final Outputs: MOSFET
Board Design: 4-Layer Glass Epoxy PC Board
Gain Control: Adjustable
tonyG is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.