Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis

Suspension / Brakes / Chassis All suspension, brakes and chassis discussions.

Reply
 
Thread Tools
Old 11-10-2013, 06:49 PM   #1
chuckclanton
 
Drives: 2013 Camaro ZL1
Join Date: Oct 2013
Location: Mesquite, Nv.
Posts: 188
1LE strut & shock P/Ns not listed on GM!

As I want to buy just struts, shocks & rear shock mounts, I check on
GM parts site and got a big zero! 22812982/3 struts, 22981391 r shocks and 22922445/6 rear shock mounts. Maybe they won't separate the track kit? For my 2014 SS that I don't want to lower but like the monotubes. Already have the ZL1 sway bars on the way from Parts Taxi. I have a staggered wheel/tire setup, and I want to use my stock springs which are the same as the 1LE.

Last edited by chuckclanton; 11-10-2013 at 06:59 PM.
chuckclanton is offline   Reply With Quote
Old 11-10-2013, 11:52 PM   #2
ICTsccaCamaro
ITCRNRS
 
ICTsccaCamaro's Avatar
 
Drives: 2014 Summit White 2SS/RS 1LE
Join Date: Jun 2012
Location: Wichita KS
Posts: 687
Your dealer should be able to order them if nothing else.
__________________
2014 Summit White 1LE 2SS/RS, Recaros, NPP, NAV, Elite Gen2 CC, ZL1 splash guards, ZL1 pedals, Exhaust Commander
Previous 2012 Black 2LT/RS, Fully 1LE swapped

Wichita Region SCCA Autocross
#23 FS
http://www.wichitascca.org/SoloII.html
ICTsccaCamaro is online now   Reply With Quote
Old 11-11-2013, 01:18 AM   #3
intensifi

 
Drives: '12 2LT Convertible
Join Date: Mar 2012
Location: Belmont, California
Posts: 1,513
GMPP catalog lists the bill of materials
__________________
Mods: GM Locking Gas Cap, RS License Plate Frame

intensifi is offline   Reply With Quote
Old 11-11-2013, 07:12 AM   #4
heymatt
 
heymatt's Avatar
 
Drives: 2012 IBM 2SS Vert.
Join Date: Dec 2011
Location: Tequesta, Fl.
Posts: 731
This should help.
Sftshldr
Beast Rider



Drives: 2013 Blk/Blk 1SS Auto
Join Date: Feb 2013
Location: Montgomery, AL.
Posts: 186

View My Garage

iTrader Rating: 0 reviews

ZL1 Part Numbers:

Strut Tower Brace (LT, SS, 1LE) - 22756880
Wheel Hubs (ZL1, 1LE) (4) - 25954415
Front Coil Spring (SS, 1LE) (2) - 92245257
Front Strut (1LE) (passenger side) - 22812984
Front Strut (1LE) (driver side) - 22812985
Front Sway Bar (1LE) - 22812946
Front Sway End Link (SS, ZL1, 1LE) (passenger side) - 22842515
Front Sway End Link (SS, ZL1, 1LE) (driver side) - 22842516
Rear Shock Mount (ZL1, 1LE) (passenger side upper) - 22836734
Rear Shock Mount (ZL1, 1LE) (driver side upper) - 22836727
Rear Coil Spring (SS, 1LE) (2) - 92195466
Rear Shocks (1LE) (2) - 22812987
Rear Sway Bar (ZL1, 1LE) - 22786260
Rear Sway Bar Endlink (SS, ZL1, 1LE) (2) - 22761221
Rear Lower Control Arm (SS, ZL1, 1LE) (2) - 20942237 (Needed for 2010-2011 car conversion)
Rear Toe Link (ZL1, 1LE) (2) - 22845487
3.91 Gears only ( 1LE ) - 22813040
Front Splitter kit ( 1LE ) - 22950575
Wheels 20x10 Black ( ZL1-1LE ) - 22798741
Wheels 20x11 Black ( ZL1-1LE ) - 22798743
2012-13 "Exposed" Hood Insert - 22845156
2013 Ashen Gray Painted Hood Insert - 22959777
Shifter Boot-Suede - 24261464
Shifter Boot-Leather - 24263725
Steering Wheel-Suede - 22813848
Steering Wheel-Leather - 22813852
Rear Spoiler - 22828467
Fog Light-LH/RH - 10335108
Fog Light Bezel-LH - 22895339
Fog Light Bezel-RH - 22895338
Front Lower Fascia/Splitter - 22894223
Front Fascia - 22831868
Wheel Polished Front - 9599037
Wheel Polished Rear - 9599038
Emblem "ZL1" Hood - 22830718
Emblem "ZL1" RR.Deck - 22830719
Fender:RH - 20943622
Fender:LH - 20943621
Liner-Frt Whl Hse-LH - 20952837
Liner-Frt Whl Hse-RH - 20952838
Valance Kit For Front Wheel House-Liners - 22757643 (These are the two wheel liner extensions on the bottom, they come in a kit and dealer must install these as part of the PDI procedure)
Extension-Frt Whl Hse-LH - 22895341
Extension-Frt Whl Hse-RH - 22895340 (These are the pieces that "stick-out" of the front of the wheelhouse-liners,also called "guards")
Hood - 22824393
ZL1 Grille - 22893907
ZL1 Grille Emblem - 22830717
ZL1 Headlamp Housing - LH-20981021 / RH-20981022 (Same as other "RS" Camaro's)
ZL1 Dash Emblem - Dash ZL1 emblem only part of trim piece applique - 22967691
Camaro Emblem - 22752666 (Same as other Camaro's)
ZL1 Rear Bumper - 22894196
ZL1 Rear Valence - 22894221
ZL1 Rear Fascia Splash Shields - LH - 22895337 / RH-22895336
ZL1 Exhaust Tips - Not Available Separately- Must Buy Complete"CAT-BACK" SYSTEM - 22874269
ZL1 Exhaust Heat Shields - LH - 20957053 / RH - 20957052
ZL1 Rear Diff Housing - 22860925 (This is an empty housing-NO internals)
ZL1 Gears A/M 3.23 / 3.73 - 3.23 - 22835277 / 3.73 - 22835278 (Ring and pinion gears only)
ZL1 Complete Differential Asm. w/Internals - 3.23 - 20931134 / 3.73 - 20931133
Front Seat Cover Driver Bottom - 20996226
Front Seat Cover Driver Back - 22795649
Front Seat Cover Passenger Bottom - 20996215
Front Seat Cover Passenger Back - 22795669
Headrests (complete assemblies,no separate covers available) - LH/RH are the same - 20996228
Rear Seat Covers Bottom - 20996254
Rear Seat Covers Back - 20996242
__________________
LS3/M6 K&N, VMAX throttle body, RX Catch Can, skip shift eliminator, DT shorties and Solo HFC, DRL harness and 5K LED DRL, ZL1 rear sway, 1LE front sway
heymatt is offline   Reply With Quote
Old 03-05-2014, 10:14 PM   #5
OmniCamaro
US Veteran
 
OmniCamaro's Avatar
 
Drives: 2011 Silver Ice Metallic 2SS/RS A6
Join Date: Jan 2011
Location: Bossier City, La
Posts: 1,059
Is the rear lower control arm the only part that needs changed if going to the 1LE struts from stock 2011 SS?
__________________
Dear Lord, give me the strength to carry on despite my Camaro addiction!
JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, 1LE suspension, (reserved for future MODS)
OmniCamaro is offline   Reply With Quote
Old 03-05-2014, 10:53 PM   #6
blake2010ss

 
blake2010ss's Avatar
 
Drives: 2010 Camaro 2ss/rs
Join Date: Oct 2009
Location: stone mountain, GA
Posts: 1,848
Send a message via AIM to blake2010ss Send a message via MSN to blake2010ss
i bought the front struts from my job separate from the track pack, so just see your local dealer.
__________________
2010 Camaro 2SS/RS LS3
678whp/630wtq
Motor work/NA Tune by Spartan Performance
Boost/Tune by Florida Speed and Power

ECS, Meth, Cammed, Suspenion
blake2010ss is offline   Reply With Quote
Old 03-09-2014, 01:26 AM   #7
OmniCamaro
US Veteran
 
OmniCamaro's Avatar
 
Drives: 2011 Silver Ice Metallic 2SS/RS A6
Join Date: Jan 2011
Location: Bossier City, La
Posts: 1,059
1LE strut & shock P/Ns not listed on GM!

Quote:
Originally Posted by blake2010ss View Post
i bought the front struts from my job separate from the track pack, so just see your local dealer.

Ok, to make it easier on us that want to change to the 1LE suspension: Can we just buy the struts (front &rear) and throw them on a 2010/2011SS? What EXACTLY is needed for just the basic upgrade (struts, shocks)?

I want to put the 1LE struts/shocks on my 2011SS.

Forgive me if it sounds like I have no clue, because I don't. Well, some clues, but not enough to figure this out on my own. Obviously.

THANKS!
__________________
Dear Lord, give me the strength to carry on despite my Camaro addiction!
JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, 1LE suspension, (reserved for future MODS)
OmniCamaro is offline   Reply With Quote
Old 03-09-2014, 04:10 AM   #8
Black Knight

 
Black Knight's Avatar
 
Drives: Supercharged LS
Join Date: Aug 2012
Location: RGV, Texas
Posts: 902
I sent a pm to Maureen and Rodgers on 1LE parts yesterday . They always got good deals and free shipping and handling . Expect to hear summtin on Monday
__________________
(click pic for build thread)
Black Knight is online now   Reply With Quote
Old 03-09-2014, 09:45 AM   #9
Synner


 
Drives: 2011 2SS/RS M6
Join Date: May 2011
Location: overseas
Posts: 3,532
You need shocks to replace shocks. Then an alignment. Thats it.
Synner is offline   Reply With Quote
Old 03-10-2014, 03:44 PM   #10
OmniCamaro
US Veteran
 
OmniCamaro's Avatar
 
Drives: 2011 Silver Ice Metallic 2SS/RS A6
Join Date: Jan 2011
Location: Bossier City, La
Posts: 1,059
Quote:
Originally Posted by Synner View Post
You need shocks to replace shocks. Then an alignment. Thats it.

So the front struts are the same and the rear shocks connect the same? These are the 2 things I thought were different.
__________________
Dear Lord, give me the strength to carry on despite my Camaro addiction!
JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, 1LE suspension, (reserved for future MODS)
OmniCamaro is offline   Reply With Quote
Old 03-10-2014, 05:53 PM   #11
Synner


 
Drives: 2011 2SS/RS M6
Join Date: May 2011
Location: overseas
Posts: 3,532
The 1LE has a slightly different bushing in the shock mount but they both mount the same and I noticed zero difference in deflection when I tried them. There is no reason to upgrade the mount, personally I think I wasted my money getting them and I track the piss out of my car. All you need is shocks.
Synner is offline   Reply With Quote
Old 03-10-2014, 07:09 PM   #12
OmniCamaro
US Veteran
 
OmniCamaro's Avatar
 
Drives: 2011 Silver Ice Metallic 2SS/RS A6
Join Date: Jan 2011
Location: Bossier City, La
Posts: 1,059
Quote:
Originally Posted by Synner View Post
The 1LE has a slightly different bushing in the shock mount but they both mount the same and I noticed zero difference in deflection when I tried them. There is no reason to upgrade the mount, personally I think I wasted my money getting them and I track the piss out of my car. All you need is shocks.

You wouldn't happen to have the part numbers would you?

Thanks for the help! It's much appreciated!!
__________________
Dear Lord, give me the strength to carry on despite my Camaro addiction!
JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, 1LE suspension, (reserved for future MODS)
OmniCamaro is offline   Reply With Quote
Old 03-10-2014, 07:31 PM   #13
Synner


 
Drives: 2011 2SS/RS M6
Join Date: May 2011
Location: overseas
Posts: 3,532
All the part numbers are up above in this thread.
Synner is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.