Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
MPD1
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics

Camaro ZL1 Forum - ZL1 Specific Topics Camaro ZL1 specific topics

Reply
 
Thread Tools
Old 03-18-2014, 07:19 PM   #1
Deke736
COTW 12/3/12
 
Deke736's Avatar
 
Drives: 2012 Ashen Gray ZL1
Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,146
Tube replacement?

Hi all- I was working on my car tonight and I broke the tube in the picture below. It connects to the cold air intake tube and the vacuum line next to the throttle body. Does anyone know what this part is called and if it's easy to find a replacement? I was thinking it's part of the PCV system because there is some oil in it, but the picture of this piece doesn't show in the parts catalog.

Any help is appreciated!

__________________
Deke736 is offline   Reply With Quote
Old 03-18-2014, 08:48 PM   #2
DrkPhx

 
DrkPhx's Avatar
 
Drives: 2013 Triple Black ZL1 / 2006 TB SS
Join Date: Feb 2011
Location: St Michael, MN
Posts: 914
That's actually the clean side oil separator. It connects to the driver side intake tract. Should be available from the local dealer. Wasn't it connected?
DrkPhx is offline   Reply With Quote
Old 03-18-2014, 09:01 PM   #3
Deke736
COTW 12/3/12
 
Deke736's Avatar
 
Drives: 2012 Ashen Gray ZL1
Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,146
Yes, I found out it's the breather cannister and it's $100 to replace because it can't be bought separately. Gonna try to plastic weld it. I had to remove the intake elbow and this was attached and when I removed it it snapped apart.
__________________
Deke736 is offline   Reply With Quote
Old 03-18-2014, 10:01 PM   #4
LuckyZL-1
Ragtop Rocket!!!
 
LuckyZL-1's Avatar
 
Drives: Black on Black Convertible
Join Date: Mar 2013
Location: Odessa Texas
Posts: 535
JB Weld for plastic to the rescue! $7 at Oreillys brother! I did the exact same thing then spray painted it black? You'll never notice the difference!
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package.
744rwhp 727rwtq
LuckyZL-1 is offline   Reply With Quote
Old 03-19-2014, 12:08 AM   #5
SamHouseIII
I Carry!
 
SamHouseIII's Avatar
 
Drives: 2013 CRT ZL1
Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,547
Quote:
Originally Posted by LuckyZL-1 View Post
JB Weld for plastic to the rescue! $7 at Oreillys brother! I did the exact same thing then spray painted it black? You'll never notice the difference!
Yep....same thing here!!
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540

From Oklahoma, Join us on Facebook
https://www.facebook.com/groups/okcamaros/

SamHouseIII is offline   Reply With Quote
Old 03-19-2014, 07:26 AM   #6
Deke736
COTW 12/3/12
 
Deke736's Avatar
 
Drives: 2012 Ashen Gray ZL1
Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,146
Glad to hear I'm not alone in this! I was really surprised when the piece pretty much came apart in my hand with very little pressure. I'll be picking up some JB Weld today!
__________________
Deke736 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.