Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
autoguy
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics


Reply
 
Thread Tools
Old 03-18-2014, 07:50 PM   #256
ZL1-V

 
ZL1-V's Avatar
 
Drives: 2013 Camaro ZL1
Join Date: Dec 2012
Location: Southern California
Posts: 2,047
Quote:
Originally Posted by SkunkWorks View Post
ZL1-V that did the trick. Went right on without any issues. Also removing the hoses from the catch can is key.
Glad it worked out for you!
ZL1-V is offline   Reply With Quote
Old 03-18-2014, 08:28 PM   #257
v8

 
v8's Avatar
 
Drives: GT500 and 14 ZL1
Join Date: Nov 2011
Location: Oakville Ont.
Posts: 1,251
Just got my Apex catch can today. Quality is A1!!!!! The only thing...... Is there suppose to be a seal between the two parts of the can? My Elite Engineering can had a rubber o-ring to seal the two parts. This one does not have a rubber o-ring between the two parts. Does it seal without one?? From anyone else that has ordered one, did it come with a rubber o-ring?
__________________
Gone but not forgotten:
1974 Corvette Stingray 454
1986 Z28
2009 Mustang GT convertible
2012 45th 2SS Vert
2013 ZL1 M6

v8 is offline   Reply With Quote
Old 03-18-2014, 08:40 PM   #258
Apex Motorsports

 
Apex Motorsports's Avatar
 
Drives: 2000 Camaro SS
Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,243
Quote:
Originally Posted by v8 View Post
Just got my Apex catch can today. Quality is A1!!!!! The only thing...... Is there suppose to be a seal between the two parts of the can? My Elite Engineering can had a rubber o-ring to seal the two parts. This one does not have a rubber o-ring between the two parts. Does it seal without one?? From anyone else that has ordered one, did it come with a rubber o-ring?
Our catch can is designed with a mechanical seal rather than relying on an o-ring. No need to add another component when you can just design a proper seal into the can. We have pumped the can up to 60 PSI with no leakage whatsoever.
__________________
Apex Motorsports is offline   Reply With Quote
Old 03-18-2014, 08:52 PM   #259
v8

 
v8's Avatar
 
Drives: GT500 and 14 ZL1
Join Date: Nov 2011
Location: Oakville Ont.
Posts: 1,251
Wow, that is quality engineering. A1+ to you guys, also thanks for the fast shipment. Ordered last week and here today. Thanks
__________________
Gone but not forgotten:
1974 Corvette Stingray 454
1986 Z28
2009 Mustang GT convertible
2012 45th 2SS Vert
2013 ZL1 M6

v8 is offline   Reply With Quote
Old 03-19-2014, 10:48 AM   #260
Apex Motorsports

 
Apex Motorsports's Avatar
 
Drives: 2000 Camaro SS
Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,243
Quote:
Originally Posted by v8 View Post
Wow, that is quality engineering. A1+ to you guys, also thanks for the fast shipment. Ordered last week and here today. Thanks
Thank you. The lead engineer on our catch can previously worked for a military contractor that designed and manufactured parts for nuclear submarines. He is really good.
__________________
Apex Motorsports is offline   Reply With Quote
Old 03-19-2014, 08:49 PM   #261
SUPERCHARGED/2SS
 
SUPERCHARGED/2SS's Avatar
 
Drives: 2011 GMC Denali HD,2013 Camaro ZL1
Join Date: Feb 2011
Location: WY
Posts: 89
Received mine Monday,very nice. Thanks for the great service!!!
__________________
SUPERCHARGED/2SS is offline   Reply With Quote
Old 03-20-2014, 12:55 PM   #262
Apex Motorsports

 
Apex Motorsports's Avatar
 
Drives: 2000 Camaro SS
Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,243
Quote:
Originally Posted by SUPERCHARGED/2SS View Post
Received mine Monday,very nice. Thanks for the great service!!!
Thank you for your order. Be sure to share some photos after you get it installed.
__________________
Apex Motorsports is offline   Reply With Quote
Old 03-20-2014, 01:20 PM   #263
big dave
 
Drives: '13 BRM ZL1
Join Date: Aug 2009
Location: Maryland
Posts: 548
Is there an easy way to remove the vacuum hose from the blower? Do you need fingers of a child to pinch that connector? My catch can is all mounted up but I can't get that hose off to save my life.
__________________
'13 ZL1 BRM A6. 11.591 @ 119.2 factory stock! Best stock mph 121.8. 11.306 @ 121 RotoFab, drag radials and skinnies. 4340# raceweight.

http://youtu.be/yggIA3C_kkA 2014... back to stock

http://youtu.be/spQLaTWbThs 2013... stock & RotoFab



'94 Z28 A4. 13.64 @ 100.1 stock. 11.71 @ 117 h/c (sold)

'99 SS M6. 13.28 @ 105 stock. 12.02 @ 116.5 bolt-ons on street tires. Full weight. New combo 10.94 @ 126.9 n/a full weight on et streets. .http://youtu.be/BCJNFJrp2lg
big dave is offline   Reply With Quote
Old 03-20-2014, 01:30 PM   #264
LuckyZL-1
Ragtop Rocket!!!
 
LuckyZL-1's Avatar
 
Drives: Black on Black Convertible
Join Date: Mar 2013
Location: San Antonio Texas
Posts: 808
Quote:
Originally Posted by big dave View Post
Is there an easy way to remove the vacuum hose from the blower? Do you need fingers of a child to pinch that connector? My catch can is all mounted up but I can't get that hose off to save my life.
Just remember the little tab turn counterclockwise if your looking at the opening. I used a long screwdriver to slide the little tab down then pull. Its easier if you get the top one first then you can turn the whole thing so that the tab on the bottom hose is facing you. Then just push that tab down with the screwdriver and pull on the hose. Voila!!!
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package.
744rwhp 727rwtq
LuckyZL-1 is offline   Reply With Quote
Old 03-20-2014, 02:25 PM   #265
Apex Motorsports

 
Apex Motorsports's Avatar
 
Drives: 2000 Camaro SS
Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,243
Quote:
Originally Posted by big dave View Post
Is there an easy way to remove the vacuum hose from the blower? Do you need fingers of a child to pinch that connector? My catch can is all mounted up but I can't get that hose off to save my life.
Quote:
Originally Posted by LuckyZL-1 View Post
Just remember the little tab turn counterclockwise if your looking at the opening. I used a long screwdriver to slide the little tab down then pull. Its easier if you get the top one first then you can turn the whole thing so that the tab on the bottom hose is facing you. Then just push that tab down with the screwdriver and pull on the hose. Voila!!!
This. There should be a really good picture of how that connector works in our instructions. Tiny hands are helpful.
__________________
Apex Motorsports is offline   Reply With Quote
Old 03-20-2014, 03:48 PM   #266
ZL1-V

 
ZL1-V's Avatar
 
Drives: 2013 Camaro ZL1
Join Date: Dec 2012
Location: Southern California
Posts: 2,047
Quote:
Originally Posted by LuckyZL-1 View Post
Just remember the little tab turn counterclockwise if your looking at the opening. I used a long screwdriver to slide the little tab down then pull. Its easier if you get the top one first then you can turn the whole thing so that the tab on the bottom hose is facing you. Then just push that tab down with the screwdriver and pull on the hose. Voila!!!

+2

That is exactly what you need to do! I thought it would be more difficult but they both popped off. Top first as stated above.
ZL1-V is offline   Reply With Quote
Old 03-20-2014, 08:44 PM   #267
Lethal Z
American Gearhead!!
 
Drives: 2013 ZL1
Join Date: Mar 2013
Location: North Shore, IL
Posts: 193
Nothing speaks louder than seeing for yourself. Glad I put this on when my ZL is still under 2000 miles.

Just installed my can last week. This is after 100 miles of "combined" driving.

Thanks Apex!

Lethal Z is offline   Reply With Quote
Old 03-20-2014, 10:46 PM   #268
v8

 
v8's Avatar
 
Drives: GT500 and 14 ZL1
Join Date: Nov 2011
Location: Oakville Ont.
Posts: 1,251
Just installed mine today 20 miles on the clock, just drove the car home from the dealer and put the catch can on.
Attached Images
 
__________________
Gone but not forgotten:
1974 Corvette Stingray 454
1986 Z28
2009 Mustang GT convertible
2012 45th 2SS Vert
2013 ZL1 M6

v8 is offline   Reply With Quote
Old 03-21-2014, 09:48 AM   #269
Apex Motorsports

 
Apex Motorsports's Avatar
 
Drives: 2000 Camaro SS
Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,243
Quote:
Originally Posted by Lethal Z View Post
Nothing speaks louder than seeing for yourself. Glad I put this on when my ZL is still under 2000 miles.

Just installed my can last week. This is after 100 miles of "combined" driving.

Thanks Apex!

That is a pretty good catch for only 100 miles. Because of the size of our filtration chamber and how much filtration media is in there it actually holds onto a lot of fluid before it actually starts to descend into the collection cup. There is probably close to as much still in the upper part of the can as there was in the cup.

Quote:
Originally Posted by v8 View Post
Just installed mine today 20 miles on the clock, just drove the car home from the dealer and put the catch can on.
That is the way to do it. Protected from Day 1. Congrats on the new ride and thanks to you both for your orders.
__________________
Apex Motorsports is offline   Reply With Quote
Old 03-21-2014, 07:03 PM   #270
nxttruck2002
 
Drives: Camaro
Join Date: Aug 2013
Location: Houston
Posts: 144
Chase I'm ordering APX9001 & APX9502 for my catch can install on 2014 ZL1. would you recommend anything else?
nxttruck2002 is offline   Reply With Quote
Old 03-21-2014, 08:09 PM   #271
Apex Motorsports

 
Apex Motorsports's Avatar
 
Drives: 2000 Camaro SS
Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,243
Quote:
Originally Posted by nxttruck2002 View Post
Chase I'm ordering APX9001 & APX9502 for my catch can install on 2014 ZL1. would you recommend anything else?
That covers everything you need to install the catch can and braided lines.
__________________
Apex Motorsports is offline   Reply With Quote
Old 03-21-2014, 08:12 PM   #272
nxttruck2002
 
Drives: Camaro
Join Date: Aug 2013
Location: Houston
Posts: 144
Quote:
Originally Posted by Apex Chase View Post
That covers everything you need to install the catch can and braided lines.
Order placed!
nxttruck2002 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:53 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.