Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vitesse Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis


Reply
 
Thread Tools
Old 04-16-2014, 11:00 PM   #18
Jrichards73

 
Jrichards73's Avatar
 
Drives: 2011 2SS/RS Victory Red
Join Date: Aug 2011
Location: Virginia
Posts: 773
Quote:
Originally Posted by The_Stache View Post
Pull out the bolt and nut on the cradle side and try and spin the bushing... I had a problem where the Loctite broke free (on both sides). The little .05oz tube per side was not enough to hold the bushing.

I bought a bottle of the stuff off amazon, cleaned up the bushings/arms and then used plenty of the Loctite 620, let it cure for 3 days. I haven't had a noise/problem since even after autox and road trips.
Awesome! I ordered the new style strut upper isolators and will order a tube of that as well and redo it all. Thanks!
__________________
Jrichards73 is offline   Reply With Quote
Old 04-16-2014, 11:50 PM   #19
L99CAMA2011


 
L99CAMA2011's Avatar
 
Drives: One of the baddest handling Gen 5s
Join Date: Feb 2011
Location: Masachusetts
Posts: 3,442
Quote:
Originally Posted by Synner View Post
Get the car up high enough to hit the stud with a really heavy hammer/sledge. Pickle fork will ruin the boot and its non-serviceable. Although if you go that route you can just buy a new radius rod, I think they're $25 or something along those lines and not too rough on the wallet.
DO NOT HAMMER ANYTHING. YOU WILL ALSO DAMAGE THE RACK INTERNALS IF THE TIE ROD END IS STILL IN TACT. ALSO WILL DAMAGE THE KNUCKLE.
L99CAMA2011 is offline   Reply With Quote
Old 04-16-2014, 11:50 PM   #20
Firefighter


 
Firefighter's Avatar
 
Drives: Black '13 2SS/RS/1LE w/NPP/NAV
Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,102
Is this something specific to the Pfadt set up or should someone running the White line bushings look into the locktite prior to install?

Sent from my DROID RAZR HD using Tapatalk
__________________
Firefighter is offline   Reply With Quote
Old 04-17-2014, 12:05 AM   #21
L99CAMA2011


 
L99CAMA2011's Avatar
 
Drives: One of the baddest handling Gen 5s
Join Date: Feb 2011
Location: Masachusetts
Posts: 3,442
Quote:
Originally Posted by Jrichards73 View Post
Awesome! I ordered the new style strut upper isolators and will order a tube of that as well and redo it all. Thanks!
Order the Loctite 638 instead. It's stronger than 620. First clean the surface of both the Pfadt bushing and the interior of the radius arm, then apply the Loctite coating both surfaces totally. Push the bush in and wipe off the excess with a tissue, then apply the locking spring. keep in a warm area and honestly I let mine sit for 3 days and never had a creak, crackle of pop out of them. I've done 4 sets so far with great results and actually just replaced the last set that went bad in my car after 30000 miles of pothole, winter salt hard cornering you name it. The salt killed them though so don't use in winter.
L99CAMA2011 is offline   Reply With Quote
Old 04-17-2014, 12:16 AM   #22
L99CAMA2011


 
L99CAMA2011's Avatar
 
Drives: One of the baddest handling Gen 5s
Join Date: Feb 2011
Location: Masachusetts
Posts: 3,442
Quote:
Originally Posted by EarlyApex View Post
The install of the radius arm bushing is done. I bought a Kent Moore removal tool and that with some heat and a hammer was able to bet the ball joints removed. I did have to modify the tool to clear the corners of the nut and also buy a longer bolt but I am still only into is $25. The rest of the job was easy. I used my press to remove the stock bushings and press in the new. I marked the bushings to help in getting them centered. They are .400" in from the edge. I am getting the alignment today so I will know later how it feels compared to stock.
The Pfadt radius bush is more stable at speeds over the Pedders red bush but the steering response is better with the Pedders bush. Here is a picture of my drivers side arm going in this weekend.
Attached Images
 

Last edited by L99CAMA2011; 04-18-2014 at 01:22 PM.
L99CAMA2011 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:38 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.