Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8

Forced Induction - V8 V8 Supercharger, turbo, nitrous discussions

Reply
 
Thread Tools
Old 06-23-2014, 04:31 PM   #1
Slickcas
 
Drives: 12' 2SS/RS LS3 IBM
Join Date: Nov 2011
Location: Paris. ILL
Posts: 265
TiAL Q BOV

A little review on the TiAL Q BOV with -2 spring. I've read about it quite a bit on here. So I decided to give it a try. First thing I noticed about it was the quality of it. Every part of it was smooth with no overlap and all non-moving parts were anodized. I bought an adapter so I can use it with my Vortech V3 just to test it so I wouldn't have to weld in the flange right away.

After installing it I just went down the street and back which is about 2 miles. It seems to seal off faster than the Maxflow Vortech BOV. Also this thing moves a lot of air very quickly. If you like the loud Phhhhhh sound this thing sure makes it at 10 psi.

It's sounds cool but is to loud for my car. I should of took a vid. of the TiAl Q in action. So people can get a feel of what these things sound like very aggressive.

The stock Vortech BOV is very stealthy. So even though this is a high quality unit and would do the job. I think I am just going to get a 2nd Vortech BOV to do the job this unit can do.

So in a nutshell if you're looking for a high-quality part that does his job very well this is it. I now see why ECS includes this bad boy in their kit.
Slickcas is offline   Reply With Quote
Old 06-23-2014, 06:01 PM   #2
blake2010ss

 
blake2010ss's Avatar
 
Drives: 2010 Camaro 2ss/rs
Join Date: Oct 2009
Location: stone mountain, GA
Posts: 1,834
Send a message via AIM to blake2010ss Send a message via MSN to blake2010ss
I listened to the tial q down at fsp shop on a c7 a few weeks ago and the YouTube videos don't do that loudness justice lol. I actually decided on the tial qr for my ECS setup.

Sent from my XT1080 using Tapatalk
__________________
2010 Camaro 2SS/RS LS3
678whp/630wtq
Motor work/NA Tune by Spartan Performance
Boost/Tune by Florida Speed and Power

ECS, Meth, Cammed, Suspenion
blake2010ss is offline   Reply With Quote
Old 06-23-2014, 07:37 PM   #3
Slickcas
 
Drives: 12' 2SS/RS LS3 IBM
Join Date: Nov 2011
Location: Paris. ILL
Posts: 265
The TiAL qr will definitely draw attention that Phh Phh Phh every time you let off the gas.
Slickcas is offline   Reply With Quote
Old 06-23-2014, 10:03 PM   #4
lakersftbl69

 
lakersftbl69's Avatar
 
Drives: 2010 camaro 1ss/rs
Join Date: Mar 2009
Location: kingston ma.
Posts: 1,375
I have the tial q on my ecs kit thing is loud as all hell I love it lol
__________________
ordered dec 15 2008 picked up on june 8 2009.
upgrades kooks 1 3/4" LTH w/ high flow cats, roto fab cai, corsa exhaust, rx catch can, hurst short throw shifter. stage 3 comp cam, 3.91 gears 445rwhp 410 rwtq all installed and dyno tuned from slowhawk performance.
lakersftbl69 is offline   Reply With Quote
Old 06-23-2014, 10:14 PM   #5
Slickcas
 
Drives: 12' 2SS/RS LS3 IBM
Join Date: Nov 2011
Location: Paris. ILL
Posts: 265
You definitely know it's there as soon as you let off the gas. Like I was saying it is bit too loud for me. That's why I put it up for sale /trade for the Vortech Maxflow that comes standard in the Vortech kits.
Slickcas is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.