Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
JUICEDMOTORSPORTS
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis

Suspension / Brakes / Chassis All suspension, brakes and chassis discussions.

Reply
 
Thread Tools
Old 08-13-2014, 12:19 PM   #1
ST1LE

 
ST1LE's Avatar
 
Drives: 2013 AGM 2SS/RS 1LE
Join Date: Oct 2012
Location: Houston
Posts: 1,373
Timing Bushings

Hey Guys,

I am having trouble finding an alignment shop that will time my bushings, or that even knows what it means. Is there a different term/terminology I should use? Also I have the below that I found in this section:

Step 1. Lift the car on a two post lift and raise it.

Step 2. Loosen the following bolts/nuts:
Front:
---Inner Control Arm Bushing
---Inner Radius Rod
Rear:
---Trailing Arm Bushings (both ends)
---Toe Rod Bushings (both ends)
---Lower Control Arm Bushings (Inner)
---Upper Control Arm Bushings (Rearward)
---Lower Strut Bushings

Step 3.
Lower the car and drive it around the parking lot SLOWLY and on to the alignment lift.

Step 4.
With the weight of the car on the wheels tighten all of the nuts/bolts to spec.

Step 5.
Align the car at the new ride height.


Is this what needs to be done for a basic lowering spring install bushing/alignment? Can anybody send me pics of the suspension for the 2013 that shows the bolts/bushings that need to be timed? Thanks a lot for any help guys!!
__________________
Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned
ST1LE is offline   Reply With Quote
Old 08-13-2014, 12:44 PM   #2
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 7,184
Here's a good thread BMR put together a few years ago:
http://www.camaro5.com/forums/showthread.php?t=153188

On the 1LE, don't worry about the toe rods as they have spherical bearings in them. Also, if you have any aftermarket bushings in any of those arms, they do not need to be timed as the inner ferrule should spin freely within the bushing.

Feel free to call, PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | JDP Facebook | 888.308.6007
JDP Tyler is offline   Reply With Quote
Old 08-13-2014, 12:56 PM   #3
ST1LE

 
ST1LE's Avatar
 
Drives: 2013 AGM 2SS/RS 1LE
Join Date: Oct 2012
Location: Houston
Posts: 1,373
Thanks Tyler, you are always so helpful!
__________________
Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned
ST1LE is offline   Reply With Quote
Old 08-13-2014, 01:06 PM   #4
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 7,184
Quote:
Originally Posted by ST1LE View Post
Thanks Tyler, you are always so helpful!
Anytime, my friend!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | JDP Facebook | 888.308.6007
JDP Tyler is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.