Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Hines Performance (HPE)
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)

V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) Driveshafts | Differentials | Gears | Rearends | Clutch | Shifters

Reply
 
Thread Tools
Old 08-15-2014, 06:06 AM   #26
376LS3
Eh, that'll happen
 
376LS3's Avatar
 
Drives: 2010 2SS
Join Date: Apr 2012
Location: Mesa, Arizona
Posts: 1,641
Ya, just wish I had the money to spend right now! I just bought another house so my savings is pretty wiped right now. Car will prolly be parked for a little over a year while I get things back under control. Sucks.....Im thinking about turning this into a N20 motor. Never used the stuff before, but dont really wanna pay the ridiculous prices for normal FI.
__________________
2010 Camaro SS LS3 - Built LS3 ready for boost when the bank account recovers!
376LS3 is offline   Reply With Quote
Old 08-15-2014, 07:19 AM   #27
ttshovel
 
Drives: 12 camaro ss, 72 chevelle, 91camaro
Join Date: Dec 2013
Location: findlay,oh
Posts: 301
True that^ the nitrous adds tons of torque, that's why i think it's the best power adder for these cars. We need that to get them moving.

And Def go to a zl1, I got the kit for 3 700 shipped from a place online. Well worth it
ttshovel is offline   Reply With Quote
Old 08-15-2014, 07:22 AM   #28
H-E


 
Drives: 2010 zr1 Camaro 2011 vert
Join Date: Apr 2013
Location: everywhere
Posts: 894
Let's see I took you from a 1.9x sixty to a 1.43 on your next trip with one phone call..and less than $100..hmmm....I'm glad to see I'm working with a good driver..1.43 with a man stick is getting it done!....Don't waste your money on the Zl1 stuff, it breaks too and I can get you a 9 inch for close to the same money...I have a new stock rear with less than 500 miles...Call me and we can get you going till you decide which way to go..
H-E is offline   Reply With Quote
Old 08-15-2014, 07:34 AM   #29
GTKILLER
 
GTKILLER's Avatar
 
Drives: 2010 Camaro SS
Join Date: May 2014
Location: Greensboro NC
Posts: 132
Ok will do
__________________
Go Hard or Go Home
GTKILLER is offline   Reply With Quote
Old 08-15-2014, 07:43 AM   #30
ttshovel
 
Drives: 12 camaro ss, 72 chevelle, 91camaro
Join Date: Dec 2013
Location: findlay,oh
Posts: 301
Quote:
Originally Posted by H-E View Post
Let's see I took you from a 1.9x sixty to a 1.43 on your next trip with one phone call..and less than $100..hmmm....I'm glad to see I'm working with a good driver..1.43 with a man stick is getting it done!....Don't waste your money on the Zl1 stuff, it breaks too and I can get you a 9 inch for close to the same money...I have a new stock rear with less than 500 miles...Call me and we can get you going till you decide which way to go..
What's the secret lol

I'm going back tomorrow and I'm cutting 2.0x 60s with drag radials and all suspension mods
ttshovel is offline   Reply With Quote
Old 08-15-2014, 08:01 AM   #31
GTKILLER
 
GTKILLER's Avatar
 
Drives: 2010 Camaro SS
Join Date: May 2014
Location: Greensboro NC
Posts: 132
I am by no means a pro drag racer . But H-E gave me some good advise about suspension alignment and confidence to go make it happen. I don't even want an automatic now.
According to H-E "You drive a stick and ride in an automatic"
That's his quote lol
__________________
Go Hard or Go Home
GTKILLER is offline   Reply With Quote
Old 08-15-2014, 11:29 AM   #32
RxDoc08
Jason
 
RxDoc08's Avatar
 
Drives: 2011 2SS/RS M6
Join Date: Apr 2011
Location: Richmond, Va
Posts: 236
Quote:
Originally Posted by GTKILLER View Post
I am by no means a pro drag racer . But H-E gave me some good advise about suspension alignment and confidence to go make it happen. I don't even want an automatic now.
According to H-E "You drive a stick and ride in an automatic"
That's his quote lol
I'm getting ready to get an alignment in a week or so after installing my 9" kit along with new toe rods. Mind giving up the alignment specs or are they secret?
__________________
Kook's headers w/ high flow cats, Borla S-Type, VMAX ported throttle body, CAI Inc. intake, Jannetty race scoop, Roto-Fab washer bottle relocation, Jannetty rough idle blower cam, DSS 9" w/ 3.70 gears, RPM Level 6 trans, Street Slayer Twin Carbon clutch, MGW Shifter, Pfadt trailing arms.
RxDoc08 is online now   Reply With Quote
Old 08-15-2014, 04:00 PM   #33
BplumCrazy-SS
 
BplumCrazy-SS's Avatar
 
Drives: 2012 SS RS- A6
Join Date: Mar 2012
Location: Houston
Posts: 599
Quote:
Originally Posted by GTKILLER View Post
Do you have parts list for upgrading the stock differential that's more in my price range
The ZL1 kit you can get for around $3500 sometimes cheaper and sell your 1000hp axles to help offset the cost and you would be around the same as your stock upgrade
__________________
ERL 416 shortblock, Custom VVT Cam, PRC 255 heads with 62 cc chambers, Johnson axle oiling tie-bar lifters, 3/8 push rods, stock rockers with trunion upgrade, BTR .660 springs, NW 102 TB, ID 1000's, Aeromotive stealth fuel system, Flex fuel sensor for E-85, Fast 102 plumbed with a nitrous express direct port kit, 2-15# bottles, Lingenfelter LNC-2000 Timing Controller, Lingenfelter NCC-002 Nitrous Controller, Nitrous outlet plate on a oh sh*t button, 2-10# bottles, C-23 Standalone fuel system for the nitrous, BMR 15" conversion kit, 15x10, 17x4.5 Racestars, BMR engine mounts
BplumCrazy-SS is offline   Reply With Quote
Old 08-15-2014, 04:30 PM   #34
GONIF

 
GONIF's Avatar
 
Drives: 73 VETTE ,, 05 2500hd diesel,14 1LE
Join Date: Feb 2014
Location: The Left lane PHOENIX AZ
Posts: 1,281
NITROUS ,will do that .
__________________
OLD GUY FLYING FAST AND LOW
GONIF is offline   Reply With Quote
Old 08-15-2014, 07:54 PM   #35
smokum
 
smokum's Avatar
 
Drives: 2010 2ssrs
Join Date: May 2013
Location: DFW
Posts: 327
Do the zl1 diff. Its proven to be bulletproof. I talked with the head gm engineer at c5 fest and he said they did not break a zl1 diff during testing. I know quite a few guys on here pushing 1000+ rwhp without even a hickup. I just recently bought one for my conversion. Going to install it with my adm billet subframe bushings upper carbon solid mounts and my rear adm 15 inch wheel brake and suspension kit.
smokum is offline   Reply With Quote
Old 08-15-2014, 08:01 PM   #36
H-E


 
Drives: 2010 zr1 Camaro 2011 vert
Join Date: Apr 2013
Location: everywhere
Posts: 894
Quote:
Originally Posted by RxDoc08 View Post
I'm getting ready to get an alignment in a week or so after installing my 9" kit along with new toe rods. Mind giving up the alignment specs or are they secret?
Of coarse your family lol..call me anytime and let's go over your car
H-E is offline   Reply With Quote
Old 08-15-2014, 08:11 PM   #37
BplumCrazy-SS
 
BplumCrazy-SS's Avatar
 
Drives: 2012 SS RS- A6
Join Date: Mar 2012
Location: Houston
Posts: 599
One question ........ How is the ZL1 posi and do they make a aftermarket posi for it
__________________
ERL 416 shortblock, Custom VVT Cam, PRC 255 heads with 62 cc chambers, Johnson axle oiling tie-bar lifters, 3/8 push rods, stock rockers with trunion upgrade, BTR .660 springs, NW 102 TB, ID 1000's, Aeromotive stealth fuel system, Flex fuel sensor for E-85, Fast 102 plumbed with a nitrous express direct port kit, 2-15# bottles, Lingenfelter LNC-2000 Timing Controller, Lingenfelter NCC-002 Nitrous Controller, Nitrous outlet plate on a oh sh*t button, 2-10# bottles, C-23 Standalone fuel system for the nitrous, BMR 15" conversion kit, 15x10, 17x4.5 Racestars, BMR engine mounts
BplumCrazy-SS is offline   Reply With Quote
Old 08-15-2014, 10:43 PM   #38
BFASTNOTLAST
 
BFASTNOTLAST's Avatar
 
Drives: 2012 SS
Join Date: Mar 2012
Location: Denver NC
Posts: 489
Quote:
Originally Posted by H-E View Post
Let's see I took you from a 1.9x sixty to a 1.43 on your next trip with one phone call..and less than $100..hmmm....I'm glad to see I'm working with a good driver..1.43 with a man stick is getting it done!....Don't waste your money on the Zl1 stuff, it breaks too and I can get you a 9 inch for close to the same money...I have a new stock rear with less than 500 miles...Call me and we can get you going till you decide which way to go..

Very impressive... Must be leaving 5500+
__________________
Lot's of carbon......
BFASTNOTLAST is offline   Reply With Quote
Old 08-15-2014, 11:25 PM   #39
GTKILLER
 
GTKILLER's Avatar
 
Drives: 2010 Camaro SS
Join Date: May 2014
Location: Greensboro NC
Posts: 132
Actually it was about 4500
__________________
Go Hard or Go Home
GTKILLER is offline   Reply With Quote
Old 08-16-2014, 09:14 AM   #40
H-E


 
Drives: 2010 zr1 Camaro 2011 vert
Join Date: Apr 2013
Location: everywhere
Posts: 894
Quote:
Originally Posted by BplumCrazy-SS View Post
One question ........ How is the ZL1 posi and do they make a aftermarket posi for it
See your already wanting to mod the zl1 diff lol....The zl1 isn't the way to go with my money imo...Your still stuck with the factory 2pc shaft and even tho the axles are better than the ss they are far from unbreakable. I like to do things once and be done with it, it's cheaper in the long run.
H-E is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.