You are browsing camaro6 
02-27-2016, 09:42 AM
|
#1 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,862
|
Like to buy silver 20x9.5
Hey I like to buy a pair of Silver 20x9.5's for my drag radials. Anyone have a pair they'd like to separate from their set of 4? pm me
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 |
|
|
|
02-27-2016, 10:02 AM
|
#2 |
 Drives: 1970 Vette,16 1SS, 07 Ford Taurus Join Date: Aug 2015
Location: Saint Peters, MO
Posts: 230
|
Are you talking about the stock SS wheels that don't cost anything when you ordered a camaro? If so you can buy my 2 when my camaro finally arrives. It just got out of quality control so hopefully I will have it in the next 2 weeks. I live in the St. Louis suburbs. I ordered some wheels already which will probably arrive before my SS.
|
|
|
|
|
02-27-2016, 09:43 PM
|
#3 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,862
|
Yep, talking about the ss 20x9.5's for my drag radials. I'll be in st louis on the 12th at Gateway for opening test and tune. My lowering springs arrive Monday so not planning on going rear wide in the rear. Hope to figure out what I'm going to do for my aftermarket wheels. If I do go aftermarket I won't need an extra set of rears as I just use mine. When you get your car PM and we can talk then. Come to Gateway if the weather is good and we'll get some laps down the track. Hoping to go really low 12's and high 11's with DR's.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
03-06-2016, 08:18 PM
|
#4 |
|
Drives: 2016 Camaro 2SS Join Date: Jan 2016
Location: Valley Village, CA
Posts: 636
|
I just pulled all four off mine. Make a shipped offer for the two you want (are they the same size all around? I didn't pay attention lol)... I'm in LA, CA.
|
|
|
|
|
03-09-2016, 08:09 PM
|
#5 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,862
|
Thx for the feedback, still undecided on what to do. I may end up buying a full set of wheels and just using mine for the drag radicals.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
