2014 z28 grill - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ashen 6.2 · 10-22-2016, 05:59 PM

Quote:

Originally Posted by Misterxman

How did you do the 3M carbon fiber paper? Is there a DIY on how to remove the chrome piece someplace? I was looking and the only thing I can tell is you have to tear apart the whole bumper to get to it and I am not replacing my bumper I just want to wrap the chrome piece, I hate that dang thing!!! Thanks if anyone can help me out, car looks good by the way.

Unfortunately I didn't attempt to do the chrome until after I finished swaping out the grill and had put the front fascia back on. It was a pain in the rear. I ended up making a template out of some thick paper and used that to mark & cut the 3M paper. I also had to use a thin plastic card to help push the 3M contact paper in between the chrome piece and the fascia surrounding it. Just take your time.

Misterxman · 10-22-2016, 09:05 PM

Quote:

Originally Posted by Ashen 6.2

Unfortunately I didn't attempt to do the chrome until after I finished swaping out the grill and had put the front fascia back on. It was a pain in the rear. I ended up making a template out of some thick paper and used that to mark & cut the 3M paper. I also had to use a thin plastic card to help push the 3M contact paper in between the chrome piece and the fascia surrounding it. Just take your time.

OK thanks for the tips I will have to give it a go after some more research.

gen5dewy · 10-25-2016, 08:53 AM

Quote:

Originally Posted by Ashen 6.2

I ordered mine from cheapestgmparts.com as they were the cheapest at the time.

Might try this site as well - http://www.generalmotorspartsonline....e=upper-grille

I have bought a lot of parts from them and they will take good care of you.

Part number is 23468208

thank you very much. this is a site i have been looking for and will help me out alot

ShadowYYZ · 10-25-2016, 01:13 PM

Everyone here has a SS and I'm here with a v6 non rs :(.

By the way, this could work with a non rs?

sbubbaklein · 10-25-2016, 07:29 PM

nice looking

Mike2ss · 11-12-2016, 08:11 PM

[QUOTE=Stormcloak;9364248]Yes, did this on mine as well:

very nice, beautiful car.

Cenafan85 · 01-23-2017, 08:15 AM

Is it possible to install the z28 grille on a V6 LS ?

10-25-2016, 07:29 PM	#33
sbubbaklein Drives: early 2011 Camaro convertible Join Date: Jul 2014 Location: House Springs, Mo Posts: 2,002 View My Garage	nice looking __________________ Early 2011 LT Convertible, ZL1 bumper, hood, side skirts, belly pan and wheels, Truecarbon ECF hood extractor, K&N CAI, Elite catch can, Big Worm Bow Tie emblems, Jacfab bracket, Vitesse TC, BMR strut brace, BMR tunnel brace, NPP exhaust

11-12-2016, 08:11 PM	#34
Mike2ss Airborne Pathfinder Drives: Camaro ZL575 Join Date: Nov 2009 Location: San Benito, TX Posts: 1,139	[QUOTE=Stormcloak;9364248]Yes, did this on mine as well: very nice, beautiful car. __________________ 2010 Camaro Indy 500 Pace car, LS3-ZL575 Other cars are- 95 BMW 325 sedan- AA exhaust, AA CAI, AA Strut bar, AA chip, M3 rotors and calipers, racing clutch, oversized injectors, upgraded M3 interior- Audi A4 SLine, with black out optics

01-23-2017, 08:15 AM	#35
Cenafan85 Drives: 2014 Camaro 2LS Join Date: Nov 2015 Location: Roc NY Posts: 503	Is it possible to install the z28 grille on a V6 LS ? __________________ 2014 Camaro BLK 2LS, MRT 2 exhaust,CAI,Anzo projector headlights,Morimoto HID,Aftermarket fog lights,RS tail lights, Strut tower brace.

10-25-2016, 01:13 PM	#32
ShadowYYZ Drives: 2014 Camaro 2LT Deep Magenta Join Date: Apr 2015 Location: Oklahoma Posts: 367	Everyone here has a SS and I'm here with a v6 non rs :(. By the way, this could work with a non rs?