12-09-2009, 12:59 PM | #1 |
Like the Batmobile Honey
|
DIY Vinyl Bowtie Black Outs
It seems like lots of people are asking about this and I don't see a DIY about it, so here goes nothing. I'm sure this already exists in a better form elsewhere, so please feel free to post the link.
You need some vinyl, a blow dryer, a small sewing needle, and a razor. you can get a roll of vinyl at walmart for like $10. *disclaimer* I'm not a vinyl guy and this may not be the best way to do it. This is just what I did. 1) Cut the vinyl into roughly the right shape and then stretch it over the bowtie. You can get just about any color, flat or glossy if you do it yourself. 2) Use the blow dryer if necessary to make it lay down. If you stretch it too much at this point it will contract when it cools. The rear bowtie is easier because it is flat and doesn't really need heat. 3) Work any air bubbles out and if necessary, prick them with a needle. 4) Lastly, take the Razor blade and run it along the groove between the gold and the chrome to cut off the excess vinyl. It sounds more involved than it is. It took me 30 minutes and 3 tries but I figured it out eventually. You can also buy precut decals on eBay. Probably cheaper and easier buy I don't know how the quality is. This is mainly for the DIY guys. Good luck.
__________________
6/29/09 Preliminary Order - 1100
9/2/09 2000! 9/15/09 3000 10/05/2009 9/22/09 3300 10/05/2009 10/1/09 3400 10/5/2009 10/9/09 3800 2G1FT1EW1A9153975 ETA 10/23 10/24/09 IN MY GARAGE!!! Big thanks to Viz for satisfying my obsession. It was more than worth the wait. Black on black 2SS/RS M6 |
12-09-2009, 03:40 PM | #2 |
Drives: 1SSRS RY L99 Join Date: Aug 2009
Location: Ontario
Posts: 1,329
|
Simple enough! Thanks!
|
12-11-2009, 06:01 PM | #3 |
Clap Clap
Drives: 2SS/RS LS3 Join Date: Sep 2009
Location: NC
Posts: 326
|
Arent you supposed to spray water or something? Maybe someone can answer this for me quickly because Im doing this tomorrow.
|
12-11-2009, 06:13 PM | #4 |
SoCal C5 Family Member
Drives: 2010 Camaro SSRS Rally Yellow Join Date: Oct 2009
Location: San Diego, CA
Posts: 412
|
No water necessary. The only complicated part is applying the front bowtie. Take your time and smooth out the bubbles.
--Eddie
__________________
Kooks 1 7/8 headers w/high flow cats
Magnaflow Cat-back Competition Series Cold Air Intake by CAI Inc. |
|
|
Tags |
black outs, bow tie, bowtie, decals, vinyl |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY Black Bowtie | Moth | Camaro DIY & HOW-TO instructions & discussions | 28 | 01-30-2013 08:49 AM |
window tint to make black bowtie?? | camaro guy | Cosmetics and Lighting Modification Discussions | 18 | 07-30-2009 11:23 PM |
Black bowtie and de-badging ? | veyron | Cosmetics and Lighting Modification Discussions | 9 | 07-27-2009 10:56 AM |
Black Bowtie? | JewelZ | Cosmetics and Lighting Modification Discussions | 5 | 07-11-2009 01:35 AM |
Request: Black Camaro with Silver Rally stripes with blacked out bowtie | DGordon | Camaro Photoshops / Renderings Forum | 1 | 05-21-2009 09:46 PM |