01-18-2018, 11:33 AM | #15 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,574
|
Does anyone know if the ZL1 spoiler will leave any unused holes installed on a car that has a stock SS spoiler?
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
01-18-2018, 12:25 PM | #16 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
Yes the ZL1 spoiler will leave holes. Another option would be the ZTA spoiler from Phastek. It's very similar to the ZL1 but without the 3rd brake light. (No holes)
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
01-18-2018, 03:38 PM | #17 |
Drives: 2012 Camaro RS 2LT 6spd man Join Date: Aug 2013
Location: Dickinson, Texas
Posts: 535
|
yes it leaves 2 holes in the center. I went to a grapics guy here in town and he made a cover the color of my car. couldn't tell it was there, placed in many car shows before I traded it.
|
01-18-2018, 03:57 PM | #18 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,574
|
Thanks guys, was afraid of that.
I was looking at the ZTA spoiler, but I understand they go on backorder a lot. I love the look of it though. I am also looking at the Anvil 'Notch' spoiler, in carbon fiber, but it also sells out very quickly...and is $450. That one has been my favorite for a while, as I can Wicker Bill it if I want.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
01-18-2018, 03:57 PM | #19 |
Drives: 2018 1LE Join Date: Nov 2017
Location: Georgia
Posts: 247
|
They are correct on the two holes in the center mine came stock on the car two in the center and two on outsides
|
01-18-2018, 06:44 PM | #20 |
Account Suspended
Drives: 2010 Camaro 1SS LS3 Join Date: Jan 2015
Location: Riverside, CA
Posts: 4,018
|
Believe it or not I used these to cover the holes for a few months... these worked great for me and matched nicely effectively eliminating any attention to the holes, and preventing water/debris intrusion. It also seems like they would last, as they went through many car washes and weather, and none of the edges started to peel. Its the cheap way and lazy way, sure... but they worked. I Finally buckled down and filled them one day... I like the look of this spoiler so much, the holes were not an issue either way... plus there might be a wicker in its future.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 |
01-18-2018, 08:47 PM | #21 |
Drives: 2017 zl1 ,2010 SS /RS L99 Join Date: Sep 2017
Location: Long Island ,Ny
Posts: 380
|
Hey guys does anyone know if this will fit a 2015 v6 camaro .
__________________
2017 zl1 - rotofab CAI , PDR , Nav .
2010 camaro SS - Procharger D1 sc (Stage 2 with upgraded intercooler)+ whole lot of other goodies ( too many to list ) |
01-22-2018, 10:32 AM | #22 |
Drives: 2012 Camaro RS 2LT 6spd man Join Date: Aug 2013
Location: Dickinson, Texas
Posts: 535
|
I don't think so, this one fits the 2010-13, there are models of this spoiler that fits the 2014-15 model Camaros.
|
01-22-2018, 10:39 AM | #23 |
Drives: 2017 zl1 ,2010 SS /RS L99 Join Date: Sep 2017
Location: Long Island ,Ny
Posts: 380
|
Oh ok cool thank you
__________________
2017 zl1 - rotofab CAI , PDR , Nav .
2010 camaro SS - Procharger D1 sc (Stage 2 with upgraded intercooler)+ whole lot of other goodies ( too many to list ) |
10-15-2018, 10:12 PM | #24 |
Drives: 2010 rs Join Date: Sep 2018
Location: Winnipeg
Posts: 65
|
Still availible???
|
|
|
|
|