Putco H13 Heavy Duty Wiring Harness

[2SSRS@Gen5diy]

Try what i said on the power and ground wires coming out of your car harness.

[JustinScheetz]

I put a 3amp (couldn't find a 6amp) diode between the red and black coming out of the car harness like you mentioned and it's still buzzing. Here's what I did:



Do you make/sell heavy duty headlamp harnesses that are more plug and play than this one perhaps?

[2SSRS@Gen5diy]

I do but with the bulbs you have, i do know there power needs so i don't know what to make.

[JustinScheetz]

So I think I totally F'ed this up. From this description it looks like they are 55W bulbs: http://www.eautoworks.com/Putco-Pure...en-PRD868.aspx

"Putco Pure halogen replacement headlight bulbs deliver 100-watt performance in a 55-watt bulb and produce brightness and intensity approaching that of High Intensity Discharge (HID) lights."

So I don't need the harness at all, do I?

[2SSRS@Gen5diy]

No i dont think you do but you need this so you dont burn the ends of the connecter.

You need to get a set of pass thru H13 9008 Ceramic Male to Female.

[JustinScheetz]

Like this?

http://www.ebay.com/itm/H13-9008-Hea...ht_1766wt_1378

Anywhere I can get those NOT on eBay? Like in a store?

[JustinScheetz]

Or this: http://www.amazon.com/TEMPERATURE-CE...sim_sbs_auto_2

[2SSRS@Gen5diy]

Originally Posted by JustinScheetz

Like this?

http://www.ebay.com/itm/H13-9008-Hea...ht_1766wt_1378

Anywhere I can get those NOT on eBay? Like in a store?

Yes this, i will send you a pm.

[david50camaro]

So if i get these bulbs, they wont work or they will cause damage to y camaro unless i get some sort of wiring harness?? I have a 2012 LS and i want to upgrade from the low yellow stock lights to the white-bright lights.....help please...........

http://www.amazon.com/Putco-230013MW...tco+h13+mirror