npp exhaust fuse pull - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2qwik2katch · 09-21-2012, 10:17 PM

Tomorrow I will be picking up my new 2013 Camaro SS. I was wondering if anyone has done the fuse removal to keep the exhaust valves open at all times? Can someone please explain to me which one or ones I need to pull out to make this happen?

Jeff_SS · 12-13-2012, 09:31 PM

PLEASE RESPOND.

I am picking mine up tomorrow, I would like to know what fuse/fuses it is as well.

Dynamite · 12-13-2012, 11:41 PM

Look on youtube or the V8 section. I saw it over there somewhere with a diagram.

YOOG · 12-14-2012, 01:39 PM

There's a fuse box in the trunk on the passenger side behind the carpet. The fuse you want is F8. Apparently, you have to remove the inner rear plastic, then the 2 push pins holding the carpet and it should be revealed (got this info from pwrmanpaul66).

I couldn't release the carpet after doing all of that so if you figure it out, please let me know!

By the way, the dual mode exhaust is brilliant!

woodstock · 12-14-2012, 01:49 PM

I know on a Corvette it's the bottom right fuse in the box,the fuse panels may be similar,just read on the fuse box cover which fuse controls the NPP exhaust.

wakespeak · 01-22-2013, 11:32 AM

Pulled mine this past weekend. I noticed the engine spins easier during shifts, which I didn't expect. Must have something to do with reduced back pressure.

Anyway I love the sound and the engine feels happier. It does boom in 6th below 65 mph, so I may consider a switch.

YOOG, remove the back panel, then the spare time cover to allow access to the side carpet. I could not get the top push pin out (the lower one screws on/off), but the carpet slid over it without tearing.

Stackerz71 · 07-09-2013, 08:44 PM

Couldn't agree more with wakespeak...shifts are much smoother (especially 1st to 2nd) and the car sounds incredible under 3k RPM. Took all of five minutes to find and remove. Can't get enough of the sound of God!

chevy 3 · 07-09-2013, 09:03 PM

Did mine on day two and never looked back. Car sound great and shifts very smooth.

Seabass33 · 07-10-2013, 02:11 AM

I have an Borla Axle back exhaust do i still have those then? If yes can someone post a pic of it?

RLHMARINES · 07-10-2013, 03:58 PM

Quote:

Originally Posted by Seabass33

I have an Borla Axle back exhaust do i still have those then? If yes can someone post a pic of it?

It's only on the dual mode factory exhaust.

09-21-2012, 10:17 PM	#1
2qwik2katch Drives: 2013 Camaro SS Join Date: Jul 2012 Location: Rosenberg, Tx Posts: 81 View My Garage	npp exhaust fuse pull Tomorrow I will be picking up my new 2013 Camaro SS. I was wondering if anyone has done the fuse removal to keep the exhaust valves open at all times? Can someone please explain to me which one or ones I need to pull out to make this happen? Last edited by 2qwik2katch; 09-22-2012 at 10:43 PM.

12-13-2012, 09:31 PM	#2
Jeff_SS "Cam Only" Drives: 2013 Camaro SS Join Date: Nov 2011 Location: Scottsdale, AZ Posts: 1,709 View My Garage	PLEASE RESPOND. I am picking mine up tomorrow, I would like to know what fuse/fuses it is as well. __________________ 2013 AGM Camaro 2SS/RS M6 \| LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger \| Pfadt Suspension, 1LE Sway Bars \| DSS 1000hp axles \| Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno)

12-14-2012, 01:39 PM	#4
YOOG Drives: 2013 1SS LS3 Join Date: Mar 2010 Location: Tampa Posts: 97	There's a fuse box in the trunk on the passenger side behind the carpet. The fuse you want is F8. Apparently, you have to remove the inner rear plastic, then the 2 push pins holding the carpet and it should be revealed (got this info from pwrmanpaul66). I couldn't release the carpet after doing all of that so if you figure it out, please let me know! By the way, the dual mode exhaust is brilliant! __________________ Dual Mode Exhaust \| 6 Speed Manual \| CAI Intake\| BMR 1" Springs\| Factory Reproductions 9" wheels

12-14-2012, 01:49 PM	#5
woodstock Drives: 2012 Corvette Grand Sport Join Date: Jan 2011 Location: martinez Ga. Posts: 503	I know on a Corvette it's the bottom right fuse in the box,the fuse panels may be similar,just read on the fuse box cover which fuse controls the NPP exhaust. __________________ Casper is a 2012 Corvette Grand Sport w/ Heritage package.

07-10-2013, 02:11 AM	#9
Seabass33 Drives: 2010 Camaro 2SS/RS Aqua Blue Join Date: Jun 2012 Location: Florida Posts: 88 View My Garage	I have an Borla Axle back exhaust do i still have those then? If yes can someone post a pic of it? __________________ 2010 Camaro 2SS/RS - Aqua Blue - ZL1 Front Fascia, ZL1 Hood Insert, MRR ZL1 1LE Replicas Wheels, ZL1 NPP Exhaust, JBA shorty headers, SLP high flow cats, KW Clubsport Coilovers, H&R Sway Bars, Recaro Pole position Seats, Schroth 6 Point Harness, Most bushings replaced with poly or aluminium - Tuned by Ted Jannetty -

12-13-2012, 11:41 PM	#3
Dynamite Drives: 2013 Camaro 2SS/RS XD Join Date: May 2012 Location: Washington, D.C. Posts: 522	Look on youtube or the V8 section. I saw it over there somewhere with a diagram.

01-22-2013, 11:32 AM	#6
wakespeak Drives: 2020 ZL1 1LE Join Date: Sep 2012 Location: Austin, Texas Posts: 1,335	Pulled mine this past weekend. I noticed the engine spins easier during shifts, which I didn't expect. Must have something to do with reduced back pressure. Anyway I love the sound and the engine feels happier. It does boom in 6th below 65 mph, so I may consider a switch. YOOG, remove the back panel, then the spare time cover to allow access to the side carpet. I could not get the top push pin out (the lower one screws on/off), but the carpet slid over it without tearing.

07-09-2013, 08:44 PM	#7
Stackerz71 Drives: Camaro SS 1LE Join Date: Apr 2013 Location: Orlando, FL Posts: 2	Couldn't agree more with wakespeak...shifts are much smoother (especially 1st to 2nd) and the car sounds incredible under 3k RPM. Took all of five minutes to find and remove. Can't get enough of the sound of God!

07-09-2013, 09:03 PM	#8
chevy 3 NEcamaro5 Drives: Black 2ss rs 1LE Join Date: Apr 2009 Location: mass Posts: 4,328 View My Garage	Did mine on day two and never looked back. Car sound great and shifts very smooth.