You are browsing camaro5 
 |
|
10-03-2013, 12:26 PM
|
#1 |
|
Master Amateur Mechanic
Drives: Victory Red 2011 2SS/RS Join Date: Jan 2013
Location: South Barrington, IL
Posts: 1,720
|
Clickinn noise when i turn
Hello everyone, I changed out my sway bars 6 months ago and about a month ago my car startig making a click/pop sound every time i turn a corner (1-20mph) Since then i have installed lowered springs but since the sound wad there before I assume it had nothing to do with it. Anyone have this problem or know what is causing it?
|
|
|
|
10-03-2013, 02:21 PM
|
#2 |
     
Drives: 2014 Camaro 1LT/RS Join Date: Sep 2013
Location: Arizona
Posts: 1,693
|
Is your blinker on when you are turning the corner?
Kidding... Hope you find a solution! |
|
|
|
|
10-03-2013, 03:06 PM
|
#3 |
Drives: 2011 2ss/rs Join Date: Nov 2011
Location: Canada
Posts: 1,431
|
You could remove your front sway bar end links and tie the sway bar from moving to narrow it down for sure to your bar/bushings/end links. Just don't get crazy!
|
|
|
|
|
10-03-2013, 03:16 PM
|
#4 | |
      
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
Hi DaFisch,
Were the sway bars installed by your dealership? Jessica Chevrolet Customer Care Quote:
|
|
|
|
|
|
10-03-2013, 03:45 PM
|
#5 | |
|
Master Amateur Mechanic
Drives: Victory Red 2011 2SS/RS Join Date: Jan 2013
Location: South Barrington, IL
Posts: 1,720
|
Quote:
|
|
|
|
|
|
10-04-2013, 08:21 AM
|
#6 |
Drives: 2012 2LT 45th anniversary Join Date: Aug 2011
Location: New Jersey
Posts: 754
|
Is it a constant clicking/ticking sound? Most likely the Differential. How many miles on your car? Might want to replace the fluid with something decent.
|
|
|
|
|
10-04-2013, 08:36 AM
|
#7 |
|
B.O.D. 02/16/10
Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010
Location: Albia,Iowa
Posts: 3,959
|
 Check your link joints to the front sways, one of the Iowa guys just found out this was his popping noise.
__________________
 |
|
|
|
|
10-04-2013, 03:25 PM
|
#8 | |
|
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
Okay. I would be happy to speak with your dealership further on the issue for you! You may send a private message at any time with your full contact information, VIN, vehicle mileage, and name of preferred dealership. Thank you!
Jessica Chevrolet Customer Care Quote:
|
|
|
|
|
|
10-05-2013, 12:05 PM
|
#9 | |
|
Master Amateur Mechanic
Drives: Victory Red 2011 2SS/RS Join Date: Jan 2013
Location: South Barrington, IL
Posts: 1,720
|
Quote:
|
|
|
|
|
|
10-05-2013, 12:22 PM
|
#10 |
|
Account Suspended
Drives: SS/RS Join Date: May 2010
Location: Transplanted from NYC..(ret. NYPD).Now in CT
Posts: 904
 |
KISS.....
Check The steering I shaft bolt first . |
|
|
|
|
10-05-2013, 04:23 PM
|
#11 |
|
I have the same thing happening on mine, with the same sways/spring kit as you. Mine didn't start until 3 years after those were installed though, so I kind of doubt it's that.
I'm going to be taking mine in soon to have a shop look at it. Hopefully nothing too expensive.
__________________
[B]
 |
|
|
|
|
01-07-2014, 09:34 PM
|
#12 |
 Drives: 2014 2SS LS3 Join Date: Jan 2014
Location: Miami, FL
Posts: 3
|
I had the same problem, with 18k miles... took it to the dealer and they replaced the front bearing and hub under the factory warranty. Never heard the clicking again!
|
|
|
|
|
|
|
|
 |
|
|
