02-09-2014, 09:23 PM | #1 |
The Beast
Drives: 13 2SS/1LE/RS/NPP/NAV/SUNROOF Join Date: Apr 2013
Location: Houston, TX
Posts: 172
|
Pfadt Suspension questions(zl spec sways specifically)
So I am at 8500 miles and decided to do a little suspension work. I just ordered the 1.25" springs and trailing arm and tie rod package and considering the zl spec sways. Question is on the comparison chart where does the 1le sways fall into line, and I have read that with the ss you need to change the sway bar end links but the zl1 its not required....so what about the 1le, Im hoping I can get away with the oem end links...im kinda tight on money. Also does anyone know what size the zl spec sways are, ive read that with the 1le just to leave the stock front sway bar alone and replace the rear..is the zl setup going to be better to replace both?
__________________
N.F CAM, P&P HEADS, SLP UDP, C.A.I., TRI Y'S, BMR 1" SPRINGS & SWAYS, PFADT TIE RODS & TRAILING ARMS, TUNED BY MATT@FSP 490HP/428TQ
Last edited by humblebeast07; 02-10-2014 at 01:23 AM. |
02-10-2014, 12:36 AM | #2 | ||
The Beast
Drives: 13 2SS/1LE/RS/NPP/NAV/SUNROOF Join Date: Apr 2013
Location: Houston, TX
Posts: 172
|
ok now im really confused
Quote:
according to this they are the same for the ss, 1le, and zl1? Quote:
So are we safe to say if you have a 2012+ V8 it is not necessary to replace end links only recommended
__________________
N.F CAM, P&P HEADS, SLP UDP, C.A.I., TRI Y'S, BMR 1" SPRINGS & SWAYS, PFADT TIE RODS & TRAILING ARMS, TUNED BY MATT@FSP 490HP/428TQ
Last edited by humblebeast07; 02-10-2014 at 01:17 AM. |
||
02-10-2014, 06:54 PM | #3 |
Drives: 14 1SS Camaro 1LE, NPP, Recaros Join Date: Nov 2013
Location: NC
Posts: 819
|
1LE are a direct bolt on, no new drop links required. Just need to get on the backorder list. Waiting for mine and other Pfadt parts. Business must be good especially w/o Pedders anymore.
|
02-12-2014, 03:10 PM | #4 |
The Beast
Drives: 13 2SS/1LE/RS/NPP/NAV/SUNROOF Join Date: Apr 2013
Location: Houston, TX
Posts: 172
|
Yea I'm waiting on springs,zl sways, and trailing arm package is on it's way
Sent from my HTC One using Tapatalk
__________________
N.F CAM, P&P HEADS, SLP UDP, C.A.I., TRI Y'S, BMR 1" SPRINGS & SWAYS, PFADT TIE RODS & TRAILING ARMS, TUNED BY MATT@FSP 490HP/428TQ
|
02-12-2014, 09:20 PM | #5 |
Drives: 2013 Camaro 1LE Join Date: Aug 2013
Location: Fort Worth
Posts: 90
|
I went with the Pfadt Drag sway bar its adjustable I like it a lot
__________________
2013 1LE Inferno Orange 848hp 836tq
TSP Forged 376ci motor w/ 1/2" Head Studs and PRC 260cc heads, F1-R Procharger Cog Drive w/ Race Intercooler, Fore Fuel System, ID1000's, Alky Meth Kit, Mantic 9000, Borla LT and CAT back ATAK Pfadt: Lowering Springs, Rear Trailing Arms and Tie Rods, Rear Drag Sway Bar, Rear Upper and Lower Control Arm Bushings, Solid Sub Frame Bushings, Front Spherical Trailing Arm Bushings, Front Lower Control Arm Bushings Barton Short Throw Shifter, AEM Boost and Wideband Gauges w/ A Pillar Pod, VIS CF Terminator Hood, and ZL1 CF spoiler |
02-13-2014, 01:11 AM | #6 |
The Beast
Drives: 13 2SS/1LE/RS/NPP/NAV/SUNROOF Join Date: Apr 2013
Location: Houston, TX
Posts: 172
|
I believe that is the zl spec rear, what do you have yours set on. Did you replace end links?
__________________
N.F CAM, P&P HEADS, SLP UDP, C.A.I., TRI Y'S, BMR 1" SPRINGS & SWAYS, PFADT TIE RODS & TRAILING ARMS, TUNED BY MATT@FSP 490HP/428TQ
|
02-13-2014, 10:13 AM | #7 |
Drives: 2013 Camaro 1LE Join Date: Aug 2013
Location: Fort Worth
Posts: 90
|
I have it set in the middle right now for street use, I haven't had a chance to get on a track yet...
__________________
2013 1LE Inferno Orange 848hp 836tq
TSP Forged 376ci motor w/ 1/2" Head Studs and PRC 260cc heads, F1-R Procharger Cog Drive w/ Race Intercooler, Fore Fuel System, ID1000's, Alky Meth Kit, Mantic 9000, Borla LT and CAT back ATAK Pfadt: Lowering Springs, Rear Trailing Arms and Tie Rods, Rear Drag Sway Bar, Rear Upper and Lower Control Arm Bushings, Solid Sub Frame Bushings, Front Spherical Trailing Arm Bushings, Front Lower Control Arm Bushings Barton Short Throw Shifter, AEM Boost and Wideband Gauges w/ A Pillar Pod, VIS CF Terminator Hood, and ZL1 CF spoiler |
|
|
|
|