05-07-2011, 04:01 PM | #1 |
Gurgling sound at 2500 to 3200 rpms
Hard to describe the sound, i'm thinking exhaust leak. Anyone with the ls3 have a similar noise?
__________________
RX catchcan, Vmax tb, Sullivan Racing billet pedals, Magnaflow 4" bullets. Solo High Flow Cats, Dyno tuned by ARD Houston, 390 RWHP 394 RWTQ,
|
|
05-07-2011, 04:10 PM | #2 |
Also seems more apparent at partial throttle.
__________________
RX catchcan, Vmax tb, Sullivan Racing billet pedals, Magnaflow 4" bullets. Solo High Flow Cats, Dyno tuned by ARD Houston, 390 RWHP 394 RWTQ,
|
|
05-07-2011, 04:20 PM | #3 |
Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008
Location: S.W. Florida
Posts: 6,294
|
A gurgling sound usually means liquid/fluid. You have a 2011, but the 2010s had a few TSB for coffee maker/water moving type sounds coming from behind the dash.
I had to take my car and get a new valve and a couple more parts. My car had a gurgling/coffee maker sound coming from behind the dash. |
05-07-2011, 04:24 PM | #4 |
Doesn't sound like liquid, I just can't describe the sound, other than it sounds abnormal. Its the engine, either intake or exhaust. I put the stock air box back on to see if it stops and it does not.
__________________
RX catchcan, Vmax tb, Sullivan Racing billet pedals, Magnaflow 4" bullets. Solo High Flow Cats, Dyno tuned by ARD Houston, 390 RWHP 394 RWTQ,
|
|
05-07-2011, 04:45 PM | #5 |
v It bites.
Drives: 2011 IBM 2SS/RS Join Date: May 2008
Location: Orlando, FL
Posts: 3,585
|
Is it a sound that could possibly indicate your car has a sack?
__________________
2011 2SS/RS
Performance: 439 RWHP: 226/236 Comp Cam, Kooks 1-7/8, CAInc, Borla S type, Vmax TB, Rx Catch Can, Trans cooler, SLP 160 termo, Melling high volume, Eibach Springs/Sways 1" drop, Whiteline complete bushing kit. |
05-07-2011, 06:14 PM | #6 |
Donkey Dick Cam Camaro
Drives: 2010 2SS/RS LS3 M6 Join Date: Oct 2009
Location: Los Angeles, CA
Posts: 1,998
|
i have a sack. i dont make gurgling sounds.
__________________
Bone Stock |
05-07-2011, 09:15 PM | #7 |
v It bites.
Drives: 2011 IBM 2SS/RS Join Date: May 2008
Location: Orlando, FL
Posts: 3,585
|
Sounds like a personal problem, I would certainly get that checked soon...
__________________
2011 2SS/RS
Performance: 439 RWHP: 226/236 Comp Cam, Kooks 1-7/8, CAInc, Borla S type, Vmax TB, Rx Catch Can, Trans cooler, SLP 160 termo, Melling high volume, Eibach Springs/Sways 1" drop, Whiteline complete bushing kit. |
05-07-2011, 09:35 PM | #8 |
Drives: 1SS Camaro Join Date: Sep 2010
Location: Texas
Posts: 661
|
I have a kind of gurgle.. more of a quick metal flapping noise... like the op said, an exhaust leak.
__________________
CAI Cold Air Intake, VMax CNC TB, Borla Sport Catback Exhaust, EE Oil Catch Can, Eibach Sway Bars and Drop Springs, AAC concept side markers, stealth signal bulbs, Heritage grille, Sparks Restorations front and rear modern SS emblems
|
05-07-2011, 09:47 PM | #9 | |
Quote:
Still trying to figure out where all the teabag jokes came from
__________________
RX catchcan, Vmax tb, Sullivan Racing billet pedals, Magnaflow 4" bullets. Solo High Flow Cats, Dyno tuned by ARD Houston, 390 RWHP 394 RWTQ,
|
||
05-15-2011, 08:11 PM | #10 |
Drives: 2011 Camaro 2SS Join Date: Apr 2011
Location: Florida
Posts: 100
|
Hello, any news or updates on the issue? I have the sme problem with my 2011' I suspect exhaust leak too... Dealer claimed normal and it is bs
|
05-16-2011, 12:50 AM | #11 |
No, I scheduled an appointment for that and an oil change but when I got there there was no one "qualified" to diagnose the issue. I'll have to go back during the week. Brakes are making noise now so i'm going in for that too. Hopefully i'll get time this week.
__________________
RX catchcan, Vmax tb, Sullivan Racing billet pedals, Magnaflow 4" bullets. Solo High Flow Cats, Dyno tuned by ARD Houston, 390 RWHP 394 RWTQ,
|
|
05-20-2011, 11:29 AM | #12 |
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
DVAS, I might suggest possibly speaking with another dealership to see if they may have something else to say about the issue. B Mccue, I hope to hear good things when you get back from your dealer. Please keep us updated.
Jeff Morris, Chevrolet Customer Service |
06-26-2011, 07:54 AM | #13 |
Drives: 2011 Camaro 2SS Join Date: Apr 2011
Location: Florida
Posts: 100
|
Okay, dealer replaced exhaust everything beyond cat, then when I left the dealer it sounded fine, now I hear it slightly again, so I am now going to guess it is exhaust and I am taking back for them to re-tighten... Normally when replacing exhaust, the good 'ol re-tighten is usual... but geez, I hope this is it....
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Magnaflow Exhaust Systems In Stock! | Sound Clips+Dynos | Special Offer | FREE S&H!!! | AJ@ECSMotorsports | V8 Bolt-Ons & Tunes | 178 | 11-20-2010 10:02 PM |
Surround sound help | thejushinator | Off-topic Discussions | 12 | 11-07-2009 09:49 PM |
Any other LS3 owners have a bad vibration sound at 1500 RPMs | Johnyoder | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 18 | 07-23-2009 04:25 PM |
Exhaust sound | bulldog | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 13 | 07-07-2009 02:43 PM |
Surround Sound Help! | T! E! X! A! S! | Off-topic Discussions | 3 | 01-24-2009 05:55 PM |