11-26-2016, 05:23 PM | #1 |
BC 2010
Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009
Location: Santa Barbara, CA
Posts: 232
|
Forgestar F14
Selling my F14 19x10 gunmetal wheels (4) in good condition with
TMPS, center caps, and lug nuts for $750.00. Prefer local pickup. I can ship in original boxes. PM me your zip if you are interested in what shipping cost to your area is. Reason for selling up graded to wider wheels. |
11-26-2016, 08:05 PM | #2 |
Drives: 17 ZL1 1LE Clone Join Date: May 2015
Location: Elkhorn, NE
Posts: 129
|
Price shipped to 68022 please.
|
11-27-2016, 06:46 AM | #3 |
BC 2010
Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009
Location: Santa Barbara, CA
Posts: 232
|
You are looking at about $250 to ship. I will check Monday to see if I can find a
better rate. Each wheel/box is 33lbs 22"x 22"x13" |
11-27-2016, 09:40 AM | #4 |
Cone Killer
Drives: 2012 SS Join Date: Dec 2013
Location: St. Albans, West Virginia
Posts: 832
|
If you don't mind me asking, what are the offset and weight on these?
__________________
2012 Camaro SS - Sold
Selling off my remaining wheels, tires, 27mm front sway bar, and MGW shift knob. Get them out of my house before my wife puts me out! |
11-27-2016, 02:09 PM | #5 |
BC 2010
Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009
Location: Santa Barbara, CA
Posts: 232
|
The per wheel weight is about 23 lbs. I'm not sure about the offset looking at spec
sheet doesn't say. I was running 285s no problem with clearance and did not stick out pass fenders. wheels are in shipping boxes |
11-27-2016, 02:26 PM | #6 |
BC 2010
Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009
Location: Santa Barbara, CA
Posts: 232
|
From what I can gather 33-44 on the offset. Hope this helps.
|
11-27-2016, 02:52 PM | #7 |
Cone Killer
Drives: 2012 SS Join Date: Dec 2013
Location: St. Albans, West Virginia
Posts: 832
|
are you running coilovers or spacers up front?
__________________
2012 Camaro SS - Sold
Selling off my remaining wheels, tires, 27mm front sway bar, and MGW shift knob. Get them out of my house before my wife puts me out! |
11-27-2016, 03:33 PM | #8 |
BC 2010
Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009
Location: Santa Barbara, CA
Posts: 232
|
When these came off I was running Toyo 295's with Ridetech coil overs with 1/4 spacer. No issues .
|
11-27-2016, 04:40 PM | #9 |
Cone Killer
Drives: 2012 SS Join Date: Dec 2013
Location: St. Albans, West Virginia
Posts: 832
|
gotta love that extra space coilovers provide. I'm going to assume I know the answer, buy you wouldn't be interested in any 20x10.5 +33 f14s would you?
__________________
2012 Camaro SS - Sold
Selling off my remaining wheels, tires, 27mm front sway bar, and MGW shift knob. Get them out of my house before my wife puts me out! |
11-27-2016, 06:10 PM | #10 |
BC 2010
Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009
Location: Santa Barbara, CA
Posts: 232
|
Not really, I just install factory OEM Z28 wheels and tires still lots of clearance.
|
11-28-2016, 12:33 PM | #11 |
BC 2010
Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009
Location: Santa Barbara, CA
Posts: 232
|
|
11-28-2016, 11:48 PM | #12 |
Drives: '23 LT Vert M6'16 Hyper 2SS Vert MT Join Date: Sep 2016
Location: Carlsbad, San Diego, CA
Posts: 583
|
This is a smokin' deal, if I didn't just buy some LE1 reps, I'd drive up and grab 'em from ya. GLWS.
|
12-01-2016, 05:41 PM | #13 |
BC 2010
Drives: 2010 Camaro SIM 2SS/RS M6 GFX SR Join Date: Aug 2009
Location: Santa Barbara, CA
Posts: 232
|
I can ship complete for a total price of $890.00. Lower 48 states only.
|
12-01-2016, 06:02 PM | #14 |
Drives: 2012 Camaro 2SS Ls3 Cammed/Blown Join Date: Feb 2016
Location: Los Angeles Ca
Posts: 267
|
Just sent a pm
|
|
|
|
|