02-18-2017, 06:50 PM | #1 |
BUMBLLB
|
Replaced DRL's
Finally got around to replacing my DRL's yesterday. Replaced them with the Morimoto XB LED's and found an adapter on ebay so it would be plug and play. I also had to buy a set of factory Fog light housings and use the 2 small adapters for the top mounting holes and the lower adjustable mounting post. I like them much better than what I had in the DRL's and they have a cut off line so no more blinding people.
Below are links to the lights and the adapter. https://www.theretrofitsource.com/ch...to-xb-led.html http://www.ebay.com/itm/331643054969...%3AMEBIDX%3AIT These are the factory fogs I bought to get the plastic adapters and the adjustable mount. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
__________________
Last edited by Chaotic73; 02-24-2017 at 03:36 PM. |
02-18-2017, 07:11 PM | #2 |
Drives: 2010 Camaro 2SS Join Date: Sep 2015
Location: Richmond Hill ,Ontario, Canada
Posts: 780
|
Yeah those look much better and brighter than the stock units, never been a fan of any of Chevy's fog lights.
|
02-19-2017, 01:01 PM | #3 |
KNGTFALL
Drives: 2012 2SS 45th edition Join Date: Aug 2012
Location: (Near) Charlotte, NC
Posts: 1,533
|
Subscribed
|
02-19-2017, 03:55 PM | #4 |
BUMBLLB
|
These are the factory fogs I bought to get the plastic adapters and the adjustable mount.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
__________________
|
02-20-2017, 08:51 AM | #5 |
Drives: 2010 Camaro 2SS Join Date: Sep 2015
Location: Richmond Hill ,Ontario, Canada
Posts: 780
|
Nice that you were able to find a light that was actually designed to replace the factory fog and kudos to you for taking it a step further, nice clean install too with the wiring adapters. I would like to do the same but the problem is I have halo led's installed in mine right now and I those look too nice to cut open and butcher to retain the same effect.
|
02-20-2017, 12:27 PM | #6 | |
BUMBLLB
|
Quote:
__________________
|
|
02-24-2017, 12:07 PM | #7 |
How hard is it to install?
|
|
02-24-2017, 03:35 PM | #8 |
BUMBLLB
|
If you get all of the parts I listed it's pretty straight forward. took my about 30-45 min to do the swap.
__________________
|
|
|
|
|