1LE 3.91 Gears v6? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SBMARO'11 · 02-03-2013, 02:57 AM

i believe i read on these specific thread of a v6 owner installing these? could i be mistaken??

lscamaro · 02-03-2013, 02:58 AM

As long as you either have a manual or a v8 rear conversion, it can be done no problem. The automatic v6s can't get it unless you do the conversion.

SBMARO'11 · 02-03-2013, 03:08 AM

yes i have a manual...i would need the ring n pinion too huh

lscamaro · 02-03-2013, 03:12 AM

Yea I think so. Not too sure, haven't looked into it much because I can't get it done. I know tracy (sc2150) has a few sets ready to go if you'd like some and he can get you a bunch of info on them. Or you can even just call a dealership like maureen@rodgerschevrolet and she can get you all the parts you need for the swap at a really really good price

SBMARO'11 · 02-03-2013, 03:26 AM

thank you

TJ91 · 02-03-2013, 07:45 AM

There was a review thread in hear somewhere and it was filled with great info

h2oplay · 02-03-2013, 08:57 AM

I have 3.73's, my opinion is 3.91 might be too much, if you're looking for a stump puller, might be OK.

VEESIKS · 02-03-2013, 10:55 AM

Be nice if someone did a exchange program, pumpkin for pumpkin. Most people with a little know how or a friend with know how could do a pumpkin swap and avoid the whole rebuild process.

SailorJerry · 02-03-2013, 05:40 PM

RX performance does a pumpkin exchange, but they also recommend the clutch pack upgrade to go along with it. Talk to Tracy

Quote:

Originally Posted by 2011Camaro

Be nice if someone did a exchange program, pumpkin for pumpkin. Most people with a little know how or a friend with know how could do a pumpkin swap and avoid the whole rebuild process.

VEESIKS · 02-03-2013, 07:03 PM

Thanks SailorJerry, I actually messaged him earlier after I stumbled on a thread mentioning it.

sycraft · 02-03-2013, 11:05 PM

Lashway has an exchange program too.

Ventmaster · 02-04-2013, 08:17 AM

Quote:

Originally Posted by h2oplay

I have 3.73's, my opinion is 3.91 might be too much, if you're looking for a stump puller, might be OK.

+1 on the 3.73's.

chevy 3 · 02-04-2013, 09:14 AM

How much better out of the hole is this setup?

blkngldbabe · 02-04-2013, 10:09 AM

^+1

02-03-2013, 02:57 AM	#1
SBMARO'11 Banned Drives: 2011 White Camaro RS Join Date: Mar 2012 Location: Santa Barbara,Ca Posts: 497	1LE 3.91 Gears v6? i believe i read on these specific thread of a v6 owner installing these? could i be mistaken??

02-03-2013, 02:58 AM	#2
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	As long as you either have a manual or a v8 rear conversion, it can be done no problem. The automatic v6s can't get it unless you do the conversion. __________________ Click Picture for Build Thread

02-03-2013, 03:12 AM	#4
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Yea I think so. Not too sure, haven't looked into it much because I can't get it done. I know tracy (sc2150) has a few sets ready to go if you'd like some and he can get you a bunch of info on them. Or you can even just call a dealership like maureen@rodgerschevrolet and she can get you all the parts you need for the swap at a really really good price __________________ Click Picture for Build Thread

02-03-2013, 07:45 AM	#6
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,033	There was a review thread in hear somewhere and it was filled with great info __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

02-03-2013, 08:57 AM	#7
h2oplay Winners find a way Drives: 2010 2LT/RS M6 Join Date: Jun 2010 Location: NE Ohio Posts: 1,137	I have 3.73's, my opinion is 3.91 might be too much, if you're looking for a stump puller, might be OK. __________________ Injen LT \| Magnaflows \| BBK LT & HFC \| Mace 25mm & P Spacer \|Richmond 3.73 \| Trifecta Tune RX Catch Can & Breather \| Pedders Inserts \| IDEALG Clutch MC & GTO Reservoir \| JDP Colorshift Halos \| Drake Bowtie Delete \|

02-03-2013, 03:08 AM	#3
SBMARO'11 Banned Drives: 2011 White Camaro RS Join Date: Mar 2012 Location: Santa Barbara,Ca Posts: 497	yes i have a manual...i would need the ring n pinion too huh

02-03-2013, 03:26 AM	#5
SBMARO'11 Banned Drives: 2011 White Camaro RS Join Date: Mar 2012 Location: Santa Barbara,Ca Posts: 497	thank you

02-03-2013, 10:55 AM	#8
VEESIKS formerly 2011Camaro Drives: 2011 Camaro LS IBM M6 Join Date: Jul 2010 Location: Fredericksburg, VA Posts: 816	Be nice if someone did a exchange program, pumpkin for pumpkin. Most people with a little know how or a friend with know how could do a pumpkin swap and avoid the whole rebuild process. __________________ Born on the Island and raised in the sand. Semper Fidelis

02-03-2013, 07:03 PM	#10
VEESIKS formerly 2011Camaro Drives: 2011 Camaro LS IBM M6 Join Date: Jul 2010 Location: Fredericksburg, VA Posts: 816	Thanks SailorJerry, I actually messaged him earlier after I stumbled on a thread mentioning it. __________________ Born on the Island and raised in the sand. Semper Fidelis

02-03-2013, 11:05 PM	#11
sycraft COTW 5/06/2013 Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012 Location: Milford, Michigan Posts: 3,201 View My Garage	Lashway has an exchange program too. __________________ 2017 Grand Sport, Borla X Pipe.....Enough Said

02-04-2013, 09:14 AM	#13
chevy 3 NEcamaro5 Drives: Black 2ss rs 1LE Join Date: Apr 2009 Location: mass Posts: 4,328 View My Garage	How much better out of the hole is this setup?

02-04-2013, 10:09 AM	#14
blkngldbabe Barossa's handler Drives: 2LT/RS RJT Join Date: Mar 2010 Location: Highland Chev,Aurora Ontario Posts: 1,097	^+1 __________________ SLP's GTA Master Specialty Vehicle and Master Parts Dealer