01-27-2015, 11:17 PM | #1 |
Drives: 2010 camaro ss A6 Join Date: Dec 2014
Location: Saudi arabia
Posts: 44
|
wheel hop issue
hello guys
first , let me say that i'm not sure if i wrote it correct or not wheel hop .? if its not please i apologize but i have this problem at the Drag with my camaro alot :( and i'm afraid that it will broke something so is there any solutions for these problem |
01-27-2015, 11:21 PM | #2 |
CamaroFans.com
|
Trailing arms and some drag radials for starters.
Kind of surprised you experience wheel hop with an automatic, but yes you can break an axle due to this. |
01-27-2015, 11:26 PM | #3 |
Drives: 2010 camaro ss A6 Join Date: Dec 2014
Location: Saudi arabia
Posts: 44
|
Thanks i will do searching for trailing arms and i will have a new setup for my wheels soon ( will go with 17 wheels and drag radials)
maybe i have this issue because i run my car so many times at the Drag and my Street tires are very bad :( Regards |
01-28-2015, 08:49 AM | #4 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
|
01-28-2015, 09:53 AM | #5 |
Drives: 2011 Camaro 2SS Join Date: Sep 2012
Location: Tulsa, Oklahoma
Posts: 538
|
Trailing arms and outer bushings.
I always had terrible wheel hop in 1st and 2nd. New BMR trailiing arms and bushings, night and day difference. I am still on street tires, now when I floor it in 1st or 2nd, I either launch or spin, no hop.
__________________
2011 Camaro 2SS/RS LS3 M6 - 672rwhp/581rwtq - 91 octane tune
|
01-28-2015, 10:35 PM | #6 | |
Drives: 2010 camaro ss A6 Join Date: Dec 2014
Location: Saudi arabia
Posts: 44
|
Quote:
i appreciate it Really i will look for an upgrade for that after i'm done from the wheels and Cam installation |
|
01-28-2015, 10:38 PM | #7 | |
Drives: 2010 camaro ss A6 Join Date: Dec 2014
Location: Saudi arabia
Posts: 44
|
Quote:
Glad that you dont have a wheel hop issue anymore i will do an upgrade for my car, But i'm not sure about the installation specially here in saudi arabia :p i hope it's easy to install ! Thanks All Regards |
|
01-29-2015, 09:25 AM | #8 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
|
01-29-2015, 09:48 AM | #9 |
Pedal 2 The Metal
Drives: 2010 2SS/RS E-Force 6XXwhp Join Date: Nov 2013
Location: Montreal
Posts: 144
|
I have everything listed in the thread. I do major wheel hop when launching on a drag strip but 0 on the street. Might be the Invo's
__________________
Camaro '10 ZL700 Package
Edelbrock Supercharger with 3.25''pulley Custom Grind Cam Kooks Headers American Thunder Exhaust Rotofab Intake Lingenfelter Twin Pump 1000 |
|
|
|
|