Caddi 18x4 spare. - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SUX2BU · 06-27-2013, 07:54 PM

Quote:

Originally Posted by RacnJsn95

Thank you! I weighed the v6 Camaro spare at about 40.9lbs with the factory spare tire... Wonder how much that tire weighs?

Is there a difference between a cts spare, and a cts-v spare (if it exists?) I've seen both mentioned, and listed for sale in the past...

There is no CTS-V spare. My thread title is wrong, I asked the admins to fix it but no one did.

Jason@JacFab · 06-27-2013, 08:59 PM

Quote:

Originally Posted by SUX2BU

There is no CTS-V spare. My thread title is wrong, I asked the admins to fix it but no one did.

Thank you for clarifying... Not sure if it says somewhere in your thread? That explains why I could never find CTS-V spares.

1989GTA · 06-27-2013, 09:09 PM

While research the Cadillac spare I came across a thread saying the wheel, tire, tools and jack were around 40 pounds.

Gtkilrss · 06-27-2013, 09:13 PM

I ran sux2bu's wheels and tires I bought from another member and actually just sold them. I had to cut the little weights off the front brakes to clear them with spacers

SUX2BU · 06-27-2013, 09:38 PM

They are actually lighter than Welds. Only reason I got rid of then was because I wanted matching wheels and found a killer deal on some Welds.

Camarojt · 06-27-2013, 10:47 PM

Quote:

Originally Posted by JEFF75645

I think I read 16.5 lbs

Double checked and this correct

From what read the GTO spares will also work and are 1.5 lbs lighter.

The Gto spares are a tad lighter. I believe Rhino runs them. I think he has v6 brakes up front. I'm not sure if they are needed for that wheel or not. Aren't they 17"?

SUX2BU · 06-27-2013, 11:09 PM

Quote:

Originally Posted by Camarojt

The Gto spares are a tad lighter. I believe Rhino runs them. I think he has v6 brakes up front. I'm not sure if they are needed for that wheel or not. Aren't they 17"?

They will not fit with Brembos. Well, I guess you could make them fit with a giant spacer, but that would make them quite a bit heavier and defeat the purpose.

Camarojt · 06-27-2013, 11:20 PM

Quote:

Originally Posted by SUX2BU

They will not fit with Brembos. Well, I guess you could make them fit with a giant spacer, but that would make them quite a bit heavier and defeat the purpose.

That's what I was thinking. You need V6 brakes to run them.

06-27-2013, 09:13 PM	#32
Gtkilrss Drives: 2016 SS Join Date: Jan 2013 Location: Blackwell, OK Posts: 400	I ran sux2bu's wheels and tires I bought from another member and actually just sold them. I had to cut the little weights off the front brakes to clear them with spacers __________________

06-27-2013, 09:38 PM	#33
SUX2BU Quit being a pu$$y Drives: FAST Join Date: Jan 2011 Location: Sachse TX (DFW) Posts: 5,825 View My Garage	They are actually lighter than Welds. Only reason I got rid of then was because I wanted matching wheels and found a killer deal on some Welds. __________________ <----- Click HERE to see ALL of my mods/write ups

06-27-2013, 09:09 PM	#31
1989GTA Drives: 1989 GTA Trans Am Join Date: Jun 2012 Location: Cypress, California Posts: 610	While research the Cadillac spare I came across a thread saying the wheel, tire, tools and jack were around 40 pounds.