Add HUD to your 2010

[WCoolBreeze]

Yes the string really helped, when Ofer and I did his car we found out what a pain it was to get the wire back up to where it should be and re-connect the light sensor. On my car the next day it was alot easier.

Walt B.

[franknbeans]

good to know. . . Is there a DYI to taking about the center consol?

I am sure it isn't to hard. . . I've had my gages in and out several times.

[FrankT]

Ofer, any idea when you will be shipping harnesses? That and the bezel from patrickt is all I'm waiting on to get started.

[2SSRS@Gen5diy]

To all the members that are waiting for there harness, I got all the connectors to make the harness but one, the only one that gm sales me on there harness, But the good news is shipped from the warehouse on Friday to my dealer and if i get it by Wednesday i will pay the extra cast to get it to you all by priority mail to have it on Friday or Saturday delivery.

But for my out of US orders that dos not work, One last thing GM dos not stock a large amount of the harness, The first time i ordered 30 pc and got 18, this last order i had 40 pc on order and am getting only 23pc, and is over a month from the last delivery from there suppler, I have more then i need for all the orders but not too many to spare So after this orders are out it will take up to 60 days to get your HUD harness.

Thanks Ofer.

[Don O]

Originally Posted by patrickt

Just to keep everyone updated I got in the shipment of trim bezels and all those owed were shipped out, I even have a couple left over for the next few kits sold

Thanks Patrick for the update. That's the last piece I'm waiting for. Plan to do the install next Friday.

Don O

[FrankT]

Thanks for the update, Ofer (and for even offering these harnesses in the first place!).

[SteveDoten]

If anyone has HUD questions, feel free to post or PM

I completed a Transformers V6/RS here in CT 2 weeks ago

[daphatgrant]

Great work everyone . I've been following this thread since it started. Ofer, No rush at all but I was wondering how your "photo guide" of the procedure was coming along.

Thanks to everyone who has contributed here and keep up the good work .

[2SSRS@Gen5diy]

I have a member coming up this next Sunday for an install will take more pics and try over the the brake to come up with a install but it will kill your computer on the up load of pics.

[daphatgrant]

Originally Posted by 2SSRS

I have a member coming up this next Sunday for an install will take more pics and try over the the brake to come up with a install but it will kill your computer on the up load of pics.

Awesome! I'll call Time Warner and tell them I'm going to need some extra bandwidth, lol.

[WCoolBreeze]

I can also answer questions that anyone has, I have with Ofer's help done two cars. Ofers 2SS (M6) and My 2LT/RS (A6).

Walt B.

[Don O]

Originally Posted by WCoolBreeze

I can also answer questions that anyone has, I have with Ofer's help done two cars. Ofers 2SS (M6) and My 2LT/RS (A6).

Walt B.

OK, simple question since I' gonna start on Friday. Ofer mentioned a 10 MM (and 7MM) hand screwdriver as a tool needed. It this just a "straight" allen wrench but in the form of a screw driver? I haven't looked at the bolts yet, but that's what I was assuming.

And was it determined that the steering wheel is 37 MM? Nut or bolt?

Don O

[2SSRS@Gen5diy]

My bad, no hand driver like a nut driver Or if you don't have that a 1/4 or 3/8 Ratchet and sockets will work it faster with nut drivers but not that much.

[2SSRS@Gen5diy]

Originally Posted by franknbeans

good to know. . . Is there a DYI to taking about the center consol?

I am sure it isn't to hard. . . I've had my gages in and out several times.

Hi if you had the gauges out it not hard, First remove the 2 side parts the long one's next move the seats all the way forward and you will see in the far back on both sides 3 screws remove them and lift that part out of the way, Next get in the back seat and look at the back of the console there are two Philips screws at the bottom of the rear of the console remove them.

Now move the seats back all the way and all that holds it is two screws on the outside at the front of the console, There is a blue connector on the passenger side you need to unconnect and you need to watch how to lift the console around the shifter if you have an A6 car there are two white clips as Walt B. on that one on M6 there is nothing hard.

Hope that helps you some if you need more its coming.