Need help or a way to go - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Lt16spSS · 03-10-2009, 12:26 PM

Make as long story short, I cut thru my (I think ECM) wiring harness on my 1991 Z28 (5.7 TPI)inside the front fender on the passenger side.Does anyone know ( besides sodering each wire one at a time) if there is a aftermarket company or salvage yard that i can call to get one. The Chevrolet parts manual has it dicontinued.

Any help will work as to I have used up any avenues I had.
Thanks

EnfuegoZ28 · 03-18-2009, 07:43 PM

Yes you can get them, but they are not cheap. Try hawksthirdgen.org and look on ebay.

Supercamaro64 · 03-18-2009, 08:49 PM

try moderndaymuscle.com idk if they hav it, but i get a lot of stuff for my 86 on there, so they might.

99b4c · 03-20-2009, 12:32 PM

Repairing it would be cheaper and less work IMO, if you dont want to solder just use butt connectors and shrink tube each wire. Easy to match up the colors.

03-10-2009, 12:26 PM	#1
Lt16spSS Motown Madman Drives: 1991 Z28, 1997 Z28 Join Date: Dec 2008 Location: Motorcity , USA Posts: 86	Need help or a way to go Make as long story short, I cut thru my (I think ECM) wiring harness on my 1991 Z28 (5.7 TPI)inside the front fender on the passenger side.Does anyone know ( besides sodering each wire one at a time) if there is a aftermarket company or salvage yard that i can call to get one. The Chevrolet parts manual has it dicontinued. Any help will work as to I have used up any avenues I had. Thanks

03-18-2009, 08:49 PM	#3
Supercamaro64 Right, right. Drives: 79 Z28, 86 Camaro, 94 Burb 4x4 Join Date: Dec 2008 Location: Fond du Lac, Wisconsin Posts: 1,350 View My Garage	try moderndaymuscle.com idk if they hav it, but i get a lot of stuff for my 86 on there, so they might. __________________ "You wanna lay the fate of the world on the kids camaro? Thats cool." "When reporters asked what it was, one official stated, 'It's a small, vicious animal that eats Mustangs.'" The Creampuff Fleet-

03-18-2009, 07:43 PM	#2
EnfuegoZ28 Drives: 2000 GMC Sonoma Join Date: Mar 2009 Location: ATL, GA Posts: 75	Yes you can get them, but they are not cheap. Try hawksthirdgen.org and look on ebay.

03-20-2009, 12:32 PM	#4
99b4c Drives: 89 RS/99 GTP/1SS soon Join Date: May 2007 Location: Chicago/Phoenix Posts: 238	Repairing it would be cheaper and less work IMO, if you dont want to solder just use butt connectors and shrink tube each wire. Easy to match up the colors.