07-03-2014, 01:53 PM | #1 |
Drives: 2014 CTS-V- totalled/ 45TH ss- SOLD Join Date: May 2013
Location: DFW, TX
Posts: 1,096
|
LF LS3 or LSA heads
Think my valves might be damaged after some cam install issues, anyone have set of heads they aren't using that I can upgrade and drop on?
__________________
2014 CTS-V... with some go-fast bits coming
|
07-04-2014, 11:10 AM | #2 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Damn what cam are you running?
I have a set of LSA heads if my buddy passes on them I will let you know ASAP.
__________________
|
07-04-2014, 01:03 PM | #3 |
Drives: 2014 CTS-V- totalled/ 45TH ss- SOLD Join Date: May 2013
Location: DFW, TX
Posts: 1,096
|
I have the LG G6x3. Dyno'd 450 RW on the 108* day after an hour of traffic and very hot inlet temps. She has potential! Thanks
__________________
2014 CTS-V... with some go-fast bits coming
|
07-04-2014, 03:44 PM | #4 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Hope you fly cutted the required amount off your pistons. We just installed one on a buddy's L99 this afternoon
__________________
|
07-04-2014, 06:48 PM | #5 |
Drives: 2014 CTS-V- totalled/ 45TH ss- SOLD Join Date: May 2013
Location: DFW, TX
Posts: 1,096
|
I was informed by LG I didn't have to fly cut for this cam, only the one above it. Should I be thinking otherwise? I don't hear any slapping or bottoming out for contact.
__________________
2014 CTS-V... with some go-fast bits coming
|
|
|
Thread Tools | |
|
|