07-30-2013, 09:28 PM | #1 |
Where am I?
Drives: Zoe the ZL1, 2012 Frontier Join Date: Apr 2011
Location: Mars, PA
Posts: 6,071
|
Anyone got a "How to" for re-attaching the back bumper?
I found a video on how to remove the bumper but it doesn't really give any good idea on how exactly it goes back on.
Given how it's removed, I don't think it quite goes back on in the reverse fashion.
__________________
FOR SALE: 2013 ZL1 Message me if interested |
07-31-2013, 12:12 AM | #2 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
It actually does go on just the opposite. It basically pops into place and is held on by clips until you put the screws back in. Some adjusting maybe necessary to line everything back up correctly, but it's actually a one man job. Two is preferred though.
|
07-31-2013, 12:42 AM | #3 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
It actually does go on just the opposite. It basically pops into place and is held on by clips until you put the screws back in. Some adjusting maybe necessary to line everything back up correctly, but it's actually a one man job. Two is preferred though.
|
07-31-2013, 01:00 AM | #4 |
|
send the ZL1 to me G and I will do it
__________________
Jannetty Racing JRE Street Package
|
07-31-2013, 01:48 AM | #5 |
Drives: Camaro ZL1 Jg. 2012, M6, black Join Date: Oct 2011
Location: Switzerland, Rheintal (SG)
Posts: 78
|
hello
the problem at the back bumper are the clips and screw hols at the backfender. the clips at the bumper to the car are no problem they click in well but at the fender you have to turn into with power because of the screw hols until they fit. I also used a lot of time until I understood it |
|
|
|
|