01-29-2014, 06:19 PM | #1 |
THERAPY
|
Led drl's
I bought these from vled's, for my drl's on my zl1. They look awesome, and Match factory halos and hid's great,but they don't fit into the housing great. Anyone else have this issue?
|
01-29-2014, 06:54 PM | #2 |
Drives: 2012 2SS RS Inferno Orange Join Date: Sep 2012
Location: Marlton, NJ
Posts: 398
|
2010, 2011 and early 2012's use the P13w bulb. After that, the PSX26W bulb was used
__________________
Last edited by Jmcsjcrs; 01-29-2014 at 07:08 PM. |
01-29-2014, 09:08 PM | #3 |
THERAPY
|
these will be a good fit for the 2014?
|
01-29-2014, 11:14 PM | #4 |
Ah DJ-IOM ZL1 haha
Drives: 13 IOM ZL1 M6 & 10 SIM 2SS M6 Join Date: Jul 2009
Location: Hope Mills, NC
Posts: 580
|
you might have to take the oring off of your factory set.... I had to do this with my buddies car.
__________________
2013 IOM ZL1 #002415 Born 09/13/12
2010 SIM 2SS/RS #005549 Born 05/02/09 |
01-30-2014, 12:08 AM | #5 |
THERAPY
|
take the o ring off of factory and put it on the led's?
|
01-30-2014, 12:15 AM | #6 |
Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011
Location: houston
Posts: 1,312
|
PICS show us what they look like..at night,during the day..
__________________
http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE .
|
01-30-2014, 10:37 AM | #7 |
Ah DJ-IOM ZL1 haha
Drives: 13 IOM ZL1 M6 & 10 SIM 2SS M6 Join Date: Jul 2009
Location: Hope Mills, NC
Posts: 580
|
take the orings off of the old lights and put them on the new LEDs. Sometimes the Oring is too big on the replacements. Also, double check that you have PSX26W or P13W. If they match up, just change the oring so the new bulb slides into place.
__________________
2013 IOM ZL1 #002415 Born 09/13/12
2010 SIM 2SS/RS #005549 Born 05/02/09 |
01-30-2014, 10:58 AM | #8 |
Snake Eater
Drives: 2012 AGM ZL1 Join Date: Oct 2011
Location: TN
Posts: 2,737
|
what is considered early 2012?
Sent from my iPad using Tapatalk
__________________
Build Thread: http://www.camaro5.com/forums/showth...95#post8351295
Make sure you don’t forget to subscribe to my channel! More content on the way. Like, share with your friends https://www.youtube.com/channel/UC9Z...sP2wjsLLFeP1zQ Follow me on instagram: http://www.instagram.com/snkeatr/ |
01-30-2014, 01:16 PM | #9 | |
Ah DJ-IOM ZL1 haha
Drives: 13 IOM ZL1 M6 & 10 SIM 2SS M6 Join Date: Jul 2009
Location: Hope Mills, NC
Posts: 580
|
Quote:
http://www.camaro5.com/forums/showth...light=LED+DRLs
__________________
2013 IOM ZL1 #002415 Born 09/13/12
2010 SIM 2SS/RS #005549 Born 05/02/09 |
|
01-30-2014, 04:40 PM | #10 |
THERAPY
|
thanks for the info guys
|
01-30-2014, 07:04 PM | #11 |
THERAPY
|
They look a lot more bright white, like a pure white with maybe a hint of blue in person. They match the halos great.
|
01-31-2014, 05:26 AM | #12 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
Just an FYI, all ZL1's have PSX26W bulbs. Since they didn't start building them until well into the 2012 production run, none have P13's. I have VIN 218 from 2012 and have PSX26W bulbs and mine was built shortly after production was started. I originally thought they were P13's because my old bulbs from my 2011 SS/RS fit (and worked) but they actually weren't the right bulb.
|
01-31-2014, 09:03 AM | #13 | |
Ah DJ-IOM ZL1 haha
Drives: 13 IOM ZL1 M6 & 10 SIM 2SS M6 Join Date: Jul 2009
Location: Hope Mills, NC
Posts: 580
|
Quote:
Here is a pic of both of mine.... keft is 6k, right is 5k.
__________________
2013 IOM ZL1 #002415 Born 09/13/12
2010 SIM 2SS/RS #005549 Born 05/02/09 |
|
01-31-2014, 09:52 AM | #14 |
Drives: 2013 ZL1 Join Date: Nov 2012
Location: Round Rock, Texas
Posts: 84
|
To replace them you have to pull the inner fenders ?
|
|
|
|
|