11-09-2015, 10:31 AM | #1 |
Drives: 2016 SS Join Date: Oct 2014
Location: DFW
Posts: 228
|
Head questions on turbo car.
I have had the heads on for about 12k miles.. LS3 GMPP CNC with stock valves and BTR spring pkg and TIT retainers.
Are they ok to reuse? Do I need to upgrade the Valves? If yes.. Can I just put new seals and lap new valves in? If there is work I can't do myself any shops I can send to that will knock them out fast so I'm not waiting? Goals are 800 to tires.. Maybe 1000 later
__________________
2016 SS with Eforce 2300
Borla Headers Borla Atak |
11-09-2015, 01:28 PM | #2 |
Account Suspended
Drives: 2015 1LE Join Date: May 2015
Location: waterloo
Posts: 293
|
If everything was running fine when you took them off they should be good to go to reinstall them.
At a 1000 wheel-you may want to look into a LSA head instead-but at 800 they'll work fine. |
11-10-2015, 10:15 AM | #3 |
Drives: 2006 Z06 Join Date: Oct 2010
Location: Gilbert, AZ
Posts: 5,712
|
Bone stock heads would do 800rwhp just fine. Yours will just make it easier. No need to mess with anything.
__________________
Nick
Corvette Z06 -1200ish rwhp |
|
|
Thread Tools | |
|
|