JDP Motorsports 2011 1SS/RS LS3 "Silver Shark" Build! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JDP Motorsports · 09-15-2010, 10:48 AM

Hi Everyone!!!

JDP Motorsports is excited to start the build on our 2011 1SS/RS LS3 Camaro! We have a lot of exciting things planned for the build up of this beast and we'll do a few different configurations through out the process. The plan is to build a road race/open road race/standing mile car that has great street manners. Horsepower is always very important but we aren't going to forget about the most important aspect of HP and torque, putting it to the ground!

The first order of business is to get this thing breathing better! Less than 12 hours after bring the Camaro to the shop was the installation of an Airaid 250-243 CAI system. With less than 100 miles on the clock an immediate performance difference was felt!

Before

After

We then installed a Hurst shifter to give us a more positive shift engagement feel. I like the look and feel of this shifter and we will also try a few other brands so we can give a good evaluation after using multiple set ups.

Today we're installing a Magnaflow 16483 which is the 3" Comp Series cat-back system. We choose this system because of our eventual horsepower and toque goals of 700-800 RWHP and RWTQ.

Our goal with this project is to assemble packages that have real world testing and work in conjunction with each other. This will be a very exciting build and please feel free to ask questions and make suggestions at any time, we want this to be an interactive build! You can also follow this on our JDP Motorsport Facebook page and the JDP website when it is launched at the end of this month. If you become a fan of JDP on Facebook you'll be eligible for monthly give-a-ways and specials no one else gets!

Please feel free to call, email or PM us anytime with questions! Have a good one!

Kind regards,

Jordan Priestley
888.308.6007

SSOOCH · 09-15-2010, 10:55 AM

2010 SSRS · 09-15-2010, 11:01 AM

Awesome

Huggerorange73 · 09-15-2010, 11:02 AM

I'll be keeping an eye on this one

subzero05 · 09-15-2010, 11:57 AM

excellent!

JDP Motorsports · 09-15-2010, 05:59 PM

Thanks everyone! This will be an exciting build!!

I got the Magnaflow 16483 3" Comp Series Cat-Back installed and it already sounds a lot better. I'll give it about 1000 miles before I record some sound files and then we'll be installing some Long Tube Headers!

Stock System (Those cans are ugly!)

Stock H-Pipe

Magnaflow 16483

Magnaflow Tru-X Crossover

I noticed more throttle response and it pulls harder from 3K RPM up. I've installed the 16483 quite a few times and this is my favorite Magnaflow system for our cars. Our Camaro currently has 1100 miles on it so at 2100 miles we'll be doing some sound clips.

The next planned mod is going to be Long Tube Headers with converters along with some suspension work, oh and we'll be installing a catch can as well. Please feel free to call, email or PM me anytime with questions! Have a good one and I'll update soon and often!

Kind regards,

Jordan Priestley
888.308.6007

mikepage0007 · 09-15-2010, 06:01 PM

jordan, great to see your build, super happy with your Magnaflow 16483 , i got from you...i am putting in the mgw shifter nwext week...heard nothing but great things about it...you might want to consider it ...

adub4185 · 09-15-2010, 06:06 PM

Looking good Jordan! I got my 16483 from you and it was and awesome purchasing experience. Keep us updated on the car and good luck.

1stTimeV8r · 09-16-2010, 07:57 AM

Looks good Jordan! We installed my Magnaflow 3" along with my Kooks LTs this past weekend. Everything fit like a champ

Can't wait to see more progress out of this build!

JDP Motorsports · 10-08-2010, 01:04 PM

Quote:

Originally Posted by mikepage0007

jordan, great to see your build, super happy with your Magnaflow 16483 , i got from you...i am putting in the mgw shifter nwext week...heard nothing but great things about it...you might want to consider it ...

Mike,

This should be pretty exciting and we'll be trying various combination's to find the best overall packages which we will then offer. I'm glad you're enjoying your 16483, I LOVE that system!!!! I will more than likely be giving the MGW a try here in the near future, how are you liking it?!?!

Quote:

Originally Posted by adub4185

Looking good Jordan! I got my 16483 from you and it was and awesome purchasing experience. Keep us updated on the car and good luck.

Thanks!!!! We appreciate your business and support!!! We'll keep the updates flowing, the next install will be the Elite Engineering catch can which I know you've had a part in dialing in!!! I'm really looking forward to it!!

Quote:

Originally Posted by 1stTimeV8r

Looks good Jordan! We installed my Magnaflow 3" along with my Kooks LTs this past weekend. Everything fit like a champ

Can't wait to see more progress out of this build!

NICE!!!!! I'm looking forward to doing our LT's shortly along with our Cam and intake manifold!!! The combination you're running is my favorite and will probably be the same route we end up going as well.

The next mod will be our Elite Engineering catch can, this is a MUST have!!!! I don't care if you're 100% stock or making 800 RWHP, everyone needs one!!!! I'll post a write up along with pictures next week! Have a great weekend everyone!!!

Kind regards,

Jordan Priestley
888.308.6007

adub4185 · 10-10-2010, 10:18 PM

Quote:

Originally Posted by JDP Motorsports

Thanks!!!! We appreciate your business and support!!! We'll keep the updates flowing, the next install will be the Elite Engineering catch can which I know you've had a part in dialing in!!! I'm really looking forward to it!!

09-15-2010, 10:48 AM	#1
JDP Motorsports Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009 Location: Sandy, Utah Posts: 3,256	JDP Motorsports 2011 1SS/RS LS3 "Silver Shark" Build! Hi Everyone!!! JDP Motorsports is excited to start the build on our 2011 1SS/RS LS3 Camaro! We have a lot of exciting things planned for the build up of this beast and we'll do a few different configurations through out the process. The plan is to build a road race/open road race/standing mile car that has great street manners. Horsepower is always very important but we aren't going to forget about the most important aspect of HP and torque, putting it to the ground! The first order of business is to get this thing breathing better! Less than 12 hours after bring the Camaro to the shop was the installation of an Airaid 250-243 CAI system. With less than 100 miles on the clock an immediate performance difference was felt! Before After We then installed a Hurst shifter to give us a more positive shift engagement feel. I like the look and feel of this shifter and we will also try a few other brands so we can give a good evaluation after using multiple set ups. Today we're installing a Magnaflow 16483 which is the 3" Comp Series cat-back system. We choose this system because of our eventual horsepower and toque goals of 700-800 RWHP and RWTQ. Our goal with this project is to assemble packages that have real world testing and work in conjunction with each other. This will be a very exciting build and please feel free to ask questions and make suggestions at any time, we want this to be an interactive build! You can also follow this on our JDP Motorsport Facebook page and the JDP website when it is launched at the end of this month. If you become a fan of JDP on Facebook you'll be eligible for monthly give-a-ways and specials no one else gets! Please feel free to call, email or PM us anytime with questions! Have a good one! Kind regards, Jordan Priestley 888.308.6007

09-15-2010, 10:55 AM	#2
SSOOCH Camaro SL,UTs Drives: 2010 Camaro SS/RS #16429 Join Date: Sep 2006 Location: South Jordan, UT Posts: 7,358 View My Garage	__________________

09-15-2010, 11:01 AM	#3
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	Awesome __________________ Jannetty Racing JRE Street Package

09-15-2010, 06:01 PM	#7
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	jordan, great to see your build, super happy with your Magnaflow 16483 , i got from you...i am putting in the mgw shifter nwext week...heard nothing but great things about it...you might want to consider it ... __________________

09-16-2010, 07:57 AM	#9
1stTimeV8r War Damn Eagle!! Drives: VR 2SS Join Date: Dec 2009 Location: Huntsville, AL Posts: 203 View My Garage	Looks good Jordan! We installed my Magnaflow 3" along with my Kooks LTs this past weekend. Everything fit like a champ Can't wait to see more progress out of this build! __________________ VR 2SS RS M6 Hot Wife, 2.8 KB, LS9 Cam, SPEC 3+ clutch, KW Variant 1 Coilovers, Pfadt F/R Sways, BMR Sub-Frame Connectors, BMR Tunnel Brace, LSR Performance Tri-Ax Shifter, BMR Trailing Arms, Kooks 1 7/8" LT Headers, MagnaFlow 3" Cat-Back Exhaust, Fesler Dual Gauge Pod w/AutoMeter A/F & Boost, ShowStopper UnderHood Accessories.....Tuned by John@APF = 627RWHP/542RWTQ

09-15-2010, 11:02 AM	#4
Huggerorange73 Banned Drives: The REAL C5 Join Date: Nov 2007 Location: Norridge, IL Posts: 1,830	I'll be keeping an eye on this one

09-15-2010, 11:57 AM	#5
subzero05 Account Suspended Drives: 2010 tbd Join Date: Mar 2009 Location: california Posts: 647	excellent!

09-15-2010, 05:59 PM	#6
JDP Motorsports Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009 Location: Sandy, Utah Posts: 3,256	Thanks everyone! This will be an exciting build!! I got the Magnaflow 16483 3" Comp Series Cat-Back installed and it already sounds a lot better. I'll give it about 1000 miles before I record some sound files and then we'll be installing some Long Tube Headers! Stock System (Those cans are ugly!) Stock H-Pipe Magnaflow 16483 Magnaflow Tru-X Crossover I noticed more throttle response and it pulls harder from 3K RPM up. I've installed the 16483 quite a few times and this is my favorite Magnaflow system for our cars. Our Camaro currently has 1100 miles on it so at 2100 miles we'll be doing some sound clips. The next planned mod is going to be Long Tube Headers with converters along with some suspension work, oh and we'll be installing a catch can as well. Please feel free to call, email or PM me anytime with questions! Have a good one and I'll update soon and often! Kind regards, Jordan Priestley 888.308.6007

09-15-2010, 06:06 PM	#8
adub4185 Drives: 2010 2SS RS, 2023 Camaro ZLE Join Date: Oct 2009 Location: Dallas, TX Posts: 632	Looking good Jordan! I got my 16483 from you and it was and awesome purchasing experience. Keep us updated on the car and good luck.

11-11-2010, 11:28 PM	#12
JDP Motorsports Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009 Location: Sandy, Utah Posts: 3,256	I installed an Elite Engineering catch-can a few weeks ago and I couldn't be happier!!! This is a MUST for any LS engine IMHO!! The Elite can is extremely nice and the install is very straight forward! I'll add pictures with my line routing as well!!! This is a worth while investment and we have them in stock at great prices! The next install will be Pfadt Sub-frame mounts!!! Kind regards, Jordan Priestley 888.308.6007

11-11-2010, 11:53 PM	#13
Huggerorange73 Banned Drives: The REAL C5 Join Date: Nov 2007 Location: Norridge, IL Posts: 1,830	Looking good!!!

11-12-2010, 12:17 AM	#14
Blitzman 173rd Paratrooper Drives: Summit White SS Join Date: Aug 2010 Location: Houston Posts: 152	Love the shifter and catch can. __________________ Jeramey - 715rwhp Vortech YSI - 10Rib CTS-V Dual Fuel Pumps American Racing Headers Thunder Racing Cam Walker Bullet Exhaust DSS 1400hp Axles Barton Industries Shifter ADM Boost/AFR Gauges

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LS3 engine specifications	Tran	Wiki	3	10-06-2010 10:56 PM
Think about this and the Z28 5th gen	13F20	Camaro ZL1 Forum - ZL1 Specific Topics	41	09-04-2010 12:59 AM
GM Reveals 2011 Chevrolet Silverado HD	FenwickHockey65	General Automotive + Other Cars Discussion	55	03-04-2010 01:56 PM
ZZ Motorsports / Vector Motorsports - LS3 Build	ZZcamaro	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	23	06-22-2009 12:38 PM