08-04-2016, 05:18 PM | #1 |
Drives: 2SS RJT camaro, vortech,684rwhp Join Date: Jun 2009
Location: riverton-wy
Posts: 40
|
2010 Ss wheels - chromed with nt05's
Like new 20"chromed 9 inch in front and chromed
Widened to 10.75 for rears ( must run provided wheel spacers) Tpm sensors ( gm ) Can see wheels in pictures in my garage $1000 plus shipping Riverton wy 82501 Front 80% Backs 40% 275 front 315 on rear
__________________
Vortech supercharger 3.15pulley , LPE fuel system, comp cam, double roller, 1 7/8 dyno techs, high flow(see thru) cats, magnaflow 3", Barton short throw, nitto nto5 275 front 315's rear, phadt's lowering springs, sway bars, bushings, trailing arms, diff bushings, dss 9" with 3.90 gears, dss alum drive shaft, BMR adj toe bars, BMR lower control arms, injector dynamics 850's, aeromotive fuel rails, twin disc carbon fiber clutch, tick bleeder
strips painted on, ground effects color matched, wet sanded and buffed, bogarts M &H tires, 11.02@131 to be cont......... Last edited by 2revbigbore; 08-04-2016 at 05:26 PM. Reason: Price change |
08-04-2016, 05:21 PM | #2 |
Drives: 2SS RJT camaro, vortech,684rwhp Join Date: Jun 2009
Location: riverton-wy
Posts: 40
|
Another picture
__________________
Vortech supercharger 3.15pulley , LPE fuel system, comp cam, double roller, 1 7/8 dyno techs, high flow(see thru) cats, magnaflow 3", Barton short throw, nitto nto5 275 front 315's rear, phadt's lowering springs, sway bars, bushings, trailing arms, diff bushings, dss 9" with 3.90 gears, dss alum drive shaft, BMR adj toe bars, BMR lower control arms, injector dynamics 850's, aeromotive fuel rails, twin disc carbon fiber clutch, tick bleeder
strips painted on, ground effects color matched, wet sanded and buffed, bogarts M &H tires, 11.02@131 to be cont......... |
08-06-2016, 09:55 AM | #3 |
Drives: 2SS RJT camaro, vortech,684rwhp Join Date: Jun 2009
Location: riverton-wy
Posts: 40
|
$900
__________________
Vortech supercharger 3.15pulley , LPE fuel system, comp cam, double roller, 1 7/8 dyno techs, high flow(see thru) cats, magnaflow 3", Barton short throw, nitto nto5 275 front 315's rear, phadt's lowering springs, sway bars, bushings, trailing arms, diff bushings, dss 9" with 3.90 gears, dss alum drive shaft, BMR adj toe bars, BMR lower control arms, injector dynamics 850's, aeromotive fuel rails, twin disc carbon fiber clutch, tick bleeder
strips painted on, ground effects color matched, wet sanded and buffed, bogarts M &H tires, 11.02@131 to be cont......... |
08-06-2016, 11:48 PM | #4 |
I just sent out some extra rears I'd picked up on ebay to Wheelcraft to get them widened. Now I'm not sure if I should spend the money with them, only to have to turnaround, get them refinished and get new tires. And even then they wouldn't be chrome :/
|
|
08-24-2016, 08:42 AM | #5 |
Drives: 2011 White 2SS Join Date: May 2011
Location: Ohio
Posts: 408
|
Who widened them?
Who chromed them? Sent from my iPhone using Tapatalk |
08-27-2016, 02:19 PM | #6 |
Drives: 2011 Inferno Orange SS Convertible Join Date: Apr 2012
Location: Tyrone, PA
Posts: 640
|
Interested. Any pitting or curb rash or anything? Can you give me an estimated shipping quote to zip 16686?
__________________
2011 SS IOM Vert. ECS Vortech 13+ psi, Water/Meth, ID850’s, ZL1 pump with MSD Voltage Booster, 2800 stall, LT headers, Drag radials, Drag alignment, Cradle Bushings. A million other supporting mods. Tuned by Ted.
|
11-06-2016, 08:38 AM | #7 |
Drives: 2SS RJT camaro, vortech,684rwhp Join Date: Jun 2009
Location: riverton-wy
Posts: 40
|
Sorry been away for awhile
No rash no pitting I had them widened from a vendor on here out of Florida I will have to look back on vendors name Run out is awesome ( first set was not ) They replaced them.
__________________
Vortech supercharger 3.15pulley , LPE fuel system, comp cam, double roller, 1 7/8 dyno techs, high flow(see thru) cats, magnaflow 3", Barton short throw, nitto nto5 275 front 315's rear, phadt's lowering springs, sway bars, bushings, trailing arms, diff bushings, dss 9" with 3.90 gears, dss alum drive shaft, BMR adj toe bars, BMR lower control arms, injector dynamics 850's, aeromotive fuel rails, twin disc carbon fiber clutch, tick bleeder
strips painted on, ground effects color matched, wet sanded and buffed, bogarts M &H tires, 11.02@131 to be cont......... |
|
|
|
|