You are browsing camaro5 
 |
|
01-06-2014, 11:23 AM
|
#1 |
|
So-Cal Camaro Invasion
Drives: Autobot Join Date: Feb 2013
Location: Tha Valley
Posts: 693
|
Best Adhesive..?
i took off my rear bowtie and am ready to put it back on.. just wondering what adhesive would work best.. first one that comes to mind is the double sided 3M tape but last time i used it was a fail.. anything else good out there..?
__________________
 |
|
|
|
01-06-2014, 11:34 AM
|
#2 |
|
Let's go Rangers!
|
If you used 3m tape and it failed then you did not properly prep the paint. 3m tape is the best there is for these type of applications.
 Sent from my AGM, 2SS/RS
__________________
 Soprano 4/1/00-6/14/11, Gone but NEVER forgotten! FSP tuned: 377/389 |
|
|
|
|
01-06-2014, 11:37 AM
|
#3 | |
           
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
Quote:
__________________
 |
|
|
|
|
|
01-06-2014, 12:25 PM
|
#4 |
|
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
I agree with the others. I would also add that 3M makes a liquid emblem glue that allows you to mount the emblem flush.
|
|
|
|
|
01-07-2014, 09:13 AM
|
#5 | |
|
So-Cal Camaro Invasion
Drives: Autobot Join Date: Feb 2013
Location: Tha Valley
Posts: 693
|
Quote:
__________________
|
|
|
|
|
|
01-07-2014, 09:23 AM
|
#6 | |
|
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
Quote:
The only negative to it IMO is the set up time. But that is easily remedied with painters tape. |
|
|
|
|
|
01-07-2014, 12:02 PM
|
#7 |
 
Drives: Blue Ray 2SS Join Date: Jul 2013
Location: Elyria
Posts: 262
|
You need to make sure that the surfaces are clean then apply 3M adhesive promoter to the paint and the emblem then the double sided tape will not come off.
Paul |
|
|
|
|
01-08-2014, 09:41 AM
|
#8 |
Drives: Company Car Join Date: Sep 2009
Location: headlightarmor.com
Posts: 3,535
|
find a local body shop supply house and get the 3M emblem tape.
|
|
|
|
|
|
|
|
 |
|
|
