09-05-2009, 09:56 PM | #1 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
3" Magnaflow Installed with ARH Headers - BEST SOUND EVER!
The 3" MagnaflowExhaust System I got in last week,got installed at my shop today and connected directly up to the AMERICAN RACING headers without a hitch.This system by far the BEST FITTING,BEST SOUNDING ,EASIEST TO INSTALL on the market today.
Magnaflow must have had a Camaro with ARH Headers to mock this one up on...I swear they did.I was sceptical on what I wanted to keep in the middle....ARH OR MAGNAFLOW.The choice was use all the magnaflow up to the cats.It made more since because you get better clearance than ARH has in the middle of the car...everybody knows that area.We had plenty of room everywhere. The sound that magnaflow came up with is just perfect..a little rumble at idle,and a tiny bit(very tiny) of rasp mixed with very strong deep tones.On a stock car with all 4 cats it could possibly be to quiet.With this being said I will probably recommend this system for HEADER GUYS ONLY. Audio - Here are some pics: I had to TIG weld the cats from the ARH Center (16" for those that want to know the numbers) Good job Magnaflow....I will never sell another 2.5 system for as long as I live. Dyno results coming soon on a bone stock 6spd manual. Andy www.admperformance.com Last edited by ADM PERFORMANCE; 09-07-2009 at 10:43 AM. |
09-05-2009, 10:02 PM | #2 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Pics of my 427 Camaro exhaust built a couple months back
I am glad I took these pics:
|
09-05-2009, 10:14 PM | #3 |
|
I wanna hear it!!!
btw....when will you have the Pfadt coil overs ?
__________________
Sleep well America.....my MARINE has your back......
|
09-05-2009, 10:25 PM | #4 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
|
09-05-2009, 10:30 PM | #5 |
Drives: Wild Cherry Join Date: Nov 2008
Location: Keller, Texas
Posts: 430
|
I can tell you it sounds GREAT!........it was my car! I am so glad that I waited on the 3 inch magnaflows...................
__________________
2010 RJT 2SS/RS L99 CAMARO ARH 1 7/8" LT HEADERS W/ HF CATS MAGNAFLOW 3" COMP EXHAUST ADM PERFORMANCE CAI ADM PERFORMANCE CUSTOM TUNE ADM PERFORMANCE PORTED THROTTLE BODY ADM PERFORMANCE TRANS COOLER 3.45 GEARS BMR TRAILING ARMS |
09-05-2009, 10:32 PM | #6 |
DTMphotography
Drives: 10' Camaro SS Join Date: Aug 2009
Location: SF Bay Area
Posts: 585
|
Sound clips!!!
__________________
2010 2SS/RS: 12.77 @ 111mph (muffler delete) - SOLD
|
09-05-2009, 10:41 PM | #7 |
Drives: holden commodore Join Date: Jul 2008
Location: Saudi Arabia
Posts: 128
|
I saw the magnaflow system for the camaro but this one is different cuz this one has a tru x-pipe not like the normal one which is mufflerd !!!
And BTW you've got the perfect choice , just what I want to have :-) I'm waiting for the Dyno results , ThanX .
__________________
|
09-05-2009, 11:51 PM | #8 |
What should I name my car
Drives: 2010 Camaro 2SS RS IOM Join Date: Jul 2009
Location: San Antonio, TX
Posts: 786
|
What does the Xpipe do?
__________________
Performance: ARH 2"/"3 headers + ARH 3" HF catback system, SS brake lines, hawk HP+ pads, motul RBF 600 fluid, K&N CAI (w/custom insulation), plug wires, air scoop, Hurst STS, Pedders Track II suspension, 18x10 wheels, 295/45/18 Nitto NT05s
Looks: powder coated iom calipers, LED foglights w/ always on harness, custom painted bowties, window tint, smoke tinted tail lights etc, oem gfx w/ custom outlets, painted taillight bezels, all weather trunk mat |
09-05-2009, 11:54 PM | #9 |
Dog Is My Copilot
Drives: 2011 2SS/RS LS3 Join Date: Jun 2009
Location: Pittsburgh, PA
Posts: 1,394
|
This setup looks sweet. I like the true X setup vs. joining the two pipes in the middle design. Can't wait to hear this setup and see the numbers.
Can you buy just the headers and cats without the x-pipe from ARH? Andy, do you think there would be any problem having the inlet pipes of the true-x flared out to slip over the pipes exiting the ARH cats in lieu of TIG welding them together?
__________________
|
09-06-2009, 12:04 AM | #10 | |
Dog Is My Copilot
Drives: 2011 2SS/RS LS3 Join Date: Jun 2009
Location: Pittsburgh, PA
Posts: 1,394
|
Here is a good explanation from a Car Craft article:
Quote:
__________________
|
|
09-06-2009, 12:46 AM | #11 |
ZL1
Drives: 10' SS/RS - Sold; 15' White ZL1 Join Date: May 2009
Location: Harbor City, CA
Posts: 683
|
Where did you get the true X-Pipe that thing is SICC!!!
__________________
|
09-06-2009, 07:41 AM | #12 | |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Quote:
Yes you can buy Headers Only! Yes we will have slip fit cats and offroad pipes. Andy |
|
09-06-2009, 09:15 AM | #13 |
Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008
Location: S.W. Florida
Posts: 6,294
|
I have a question about the exhaust tips. In the one picture the exhaust doesn't have any exhaust tips. Are the tips not welded to the exhaust? How are the tips installed on the exhaust?
Thanks, The exhaust looks great. |
09-06-2009, 10:27 AM | #14 | |
Okie doke
|
Quote:
Crowley
__________________
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Magnaflow V6 Street Series Sound File* | JDP Motorsports | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 26 | 10-03-2016 04:49 PM |
Magnaflow Competition Series VIDEO SOUND CLIP!! #16580 | linkwpc | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 58 | 12-21-2011 10:29 AM |
Doug Thorley Shorty Headers for 2010 Camaro Installed -WOW! | Rallyman6 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 64 | 03-13-2011 12:36 PM |
Magnaflow Exhaust 2010 Camaro | JDP Motorsports | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 95 | 05-24-2010 12:17 AM |
Exhaust sound | bulldog | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 13 | 07-07-2009 02:43 PM |