Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro DIY & HOW-TO instructions & discussions


Reply
 
Thread Tools
Old 05-17-2011, 02:39 PM   #141
2SSRS@Gen5diy
 
2SSRS@Gen5diy's Avatar
 
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
You can run more then 7LED'ss per side on the door wire.

But that is not the problem for you, Your car does not have a wire from the BCM to connector x208

If you can hold on i will have the wire to add that, and more.
2SSRS@Gen5diy is offline   Reply With Quote
Old 05-17-2011, 02:53 PM   #142
irocnroll


 
irocnroll's Avatar
 
Drives: '91 RS Vert, '11 Grand Cherokee
Join Date: May 2009
Location: Connecticut
Posts: 2,343
I know I dont have the connector, what I want to do is draw power off of the Harness you sent me. What I would do is run the Door Panels through the car over to this harness.

I can build a couple Y connectors and Run the wire. I just need to know if I can run the 5 LED's and the Guage pack off of the Guage packs power supply without running into electrical issues. I want to make this as plug and play as possible.
irocnroll is offline   Reply With Quote
Old 05-17-2011, 05:22 PM   #143
2SSRS@Gen5diy
 
2SSRS@Gen5diy's Avatar
 
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
Yes you can but what i was trying to say is, its one wire that is missing between two connecters and your door's ABL will work
2SSRS@Gen5diy is offline   Reply With Quote
Old 05-17-2011, 10:33 PM   #144
irocnroll


 
irocnroll's Avatar
 
Drives: '91 RS Vert, '11 Grand Cherokee
Join Date: May 2009
Location: Connecticut
Posts: 2,343
Quote:
Originally Posted by 2SSRS View Post
Yes you can but what i was trying to say is, its one wire that is missing between two connecters and your door's ABL will work
What wire is that?
irocnroll is offline   Reply With Quote
Old 05-17-2011, 10:44 PM   #145
2SSRS@Gen5diy
 
2SSRS@Gen5diy's Avatar
 
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
There is a wire that is not there coming out of the BCM and going to X208 connecter that is all that is missing to power your door ABL.

Working on getting the terminals to make the wire.
2SSRS@Gen5diy is offline   Reply With Quote
Old 05-18-2011, 07:42 AM   #146
irocnroll


 
irocnroll's Avatar
 
Drives: '91 RS Vert, '11 Grand Cherokee
Join Date: May 2009
Location: Connecticut
Posts: 2,343
Does this require and soldering or splicing?
irocnroll is offline   Reply With Quote
Old 05-18-2011, 08:51 AM   #147
2SSRS@Gen5diy
 
2SSRS@Gen5diy's Avatar
 
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
No, if it all works out all you will do is take the battery power off, then the two connecters and push the wire in the the BCM connecter on one end then into the X208 connecter on the outer side, and put it back together and it will work.

For the ABL in the doors we found that that is the only wire missing for it to work.
2SSRS@Gen5diy is offline   Reply With Quote
Old 05-18-2011, 09:04 AM   #148
irocnroll


 
irocnroll's Avatar
 
Drives: '91 RS Vert, '11 Grand Cherokee
Join Date: May 2009
Location: Connecticut
Posts: 2,343
The power to the door locks has to plug into a harness somewhere within the door, correct? Is it possible instead of T-taping there to create a Y splitter within the door?

I havent opened up the panels yet so I am not quite sure what the BCM or X208 connectors are that you are referring to. Trying to visualize it I am getting lost.
irocnroll is offline   Reply With Quote
Old 05-18-2011, 09:22 AM   #149
Batman0837
 
Batman0837's Avatar
 
Drives: '10 CGM 2SS/RS # 71394
Join Date: Sep 2009
Location: Middletown, DE
Posts: 365
The door lock lead is 12v constant so your led would be on at all times, even with the ignition in "off"...
Batman0837 is offline   Reply With Quote
Old 05-18-2011, 09:26 AM   #150
irocnroll


 
irocnroll's Avatar
 
Drives: '91 RS Vert, '11 Grand Cherokee
Join Date: May 2009
Location: Connecticut
Posts: 2,343
Quote:
Originally Posted by Batman0837 View Post
The door lock lead is 12v constant so your led would be on at all times, even with the ignition in "off"...
Sorry I meant the window switch that you would T-Tap into.
irocnroll is offline   Reply With Quote
Old 05-18-2011, 09:36 AM   #151
2SSRS@Gen5diy
 
2SSRS@Gen5diy's Avatar
 
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
Quote:
Originally Posted by irocnroll View Post
The power to the door locks has to plug into a harness somewhere within the door, correct? Is it possible instead of T-taping there to create a Y splitter within the door?

I havent opened up the panels yet so I am not quite sure what the BCM or X208 connectors are that you are referring to. Trying to visualize it I am getting lost.
No you can not power off the door locks, but you can use the the yellow off the window switch for your LED's.

The BCM is the Body Control Module and X208 is a connecter that goes form the IP to the body, and its under the driver side of the car.
2SSRS@Gen5diy is offline   Reply With Quote
Old 05-18-2011, 10:49 AM   #152
FED728
 
Drives: Aqua Blue SS
Join Date: Nov 2009
Location: Chesterfield, VA
Posts: 135
any luck on finding more tubes to do the dash with?
FED728 is offline   Reply With Quote
Old 05-18-2011, 10:56 AM   #153
2SSRS@Gen5diy
 
2SSRS@Gen5diy's Avatar
 
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
Look for info on this by end of next week i will start a thread.
2SSRS@Gen5diy is offline   Reply With Quote
Old 05-18-2011, 07:08 PM   #154
Gene Culley
Account Suspended
 
Drives: 2013 SS
Join Date: Dec 2009
Location: Boyertown, PA
Posts: 1,374
Smile

Ofer is just the best, isn't he?? Thanks for everything you do for us Ofer.
Gene Culley is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Camaro Product Manager - interview Moose 5th Gen Camaro SS LS LT General Discussions 11 04-04-2012 06:10 PM
4th Annual GM Performance Parts LSX Shootout!! nmcajeff Dragstrip and Launch Techniques Discussion 3 07-30-2010 12:05 PM
Installation Camaro Needed for Manual for a Justice Install Package in SF Bay Area Info@PeddersUSA.com USA - California 6 04-30-2010 08:02 PM
GM memo to dealers Moose 5th Gen Camaro SS LS LT General Discussions 41 02-04-2010 07:33 PM


All times are GMT -5. The time now is 03:08 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.