08-11-2013, 12:28 AM | #1 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
Cori; Airmaster's Camaro
UPDATED PICTURE:
Hello guys, wanted to get a build thread up to really detail my car's transformation and also create a consideration for a future COTW (hey, why not?). Professional photos will be coming but for now this is what I have. Attention: All rights reserved. Any and all photos/videos found within this thread may not be copied, edited, reproduced, linked, or displayed in any form or by any means; electronic, mechanical, optical, or otherwise, without prior written permission from myself. If you wish to use any of the photos/videos found within this thread please send me a PM. Thanks December 16... my truck is totaled. Loved this thing and grateful that it saved my life (and my date's life lol) in a rear end collision. Driver hit me going 60 mph while I was at a stand still. Made me rethink life as a whole and put me through one of the most stressful situations of my life. Fast forward to January 13... I purchased my new baby. Named her Cori... Decided to go with some cheap modifications first, black "Camaro" logos, black gill stripes, and black hood spears.... Made a DIY for the Camaro logo HERE: http://www.camaro5.com/forums/showthread.php?t=284724 Gill stripes... Custom hood spears with "LFX" logo... I'll continue the process in the next posts....
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear Last edited by Airmaster; 01-22-2014 at 10:39 PM. |
08-11-2013, 12:43 AM | #2 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
Next up was the RX Catch Can, RX throttle body, and a K&N Custom Intake...
Catch can was suggested by nearly everyone and I got one painted to match. Throttle body was also suggested and also painted to match my exterior. Finally the K&N, while a simple installation, I made things a bit more complicated inserting some insulation in key areas (similar to what CAI has going on). Had the insulation laying around and decided to make good use of it! Then came the wheels/tires. I was lucky to find another fellow Camaro5 member selling his wheel/tire setup due to him having to trade in his Camaro. Ended up with some sick 20" TSW Interlagos wrapped in Nitto Invos.... made a hell of a difference in looks--and handling. Rims just made it into a head turner, the next mods would just sweeten the time it took to twist your neck...
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
08-11-2013, 12:55 AM | #3 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
Do you happen to have any other pics of the wheels? They look great on the car! Thanks for the DIY btw
|
08-11-2013, 01:09 AM | #4 | |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
Quote:
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
|
08-11-2013, 01:27 AM | #5 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
After the rims I went on a purchase frenzy, buying ACS side skirts, an ACS T5 splitter, and a NLP dovetail spoiler. Didn't get them on all together though, first up was the ACS Side skirts...
You can barely see them due to the contrast but they're there Before I was able to get the Splitter and Spoiler on I installed a few more things (actually a lot more). Unfortunately I was also rear ended in between this time. May 29 Nissan Altima vs Chevy Camaro... Allowed me to use the insurance money to get an aftermarket diffuser, ended up going with the RX Sport Diffuser, which would be installed later on. Shortly after the accident I tinted the tail lights and fogged out the headlights. Also changed the taillight bezels to black plastic instead of chrome plastic... Drove around with no diffuser for some time after I received my car back from the repair shop. They repaired the damaged bumper, replaced the shock bumpers, and removed the old diffuser.
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
08-23-2013, 06:39 PM | #6 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
After the headlights and taillights I got busy with the LG short shifter. I fabricated a custom pool ball knob. Bought the knob, a bushing, a nut, a 9/16-16 tap, a rubber grommet, and some JB Weld...
Thought it came out great. THIS was the shifter this car should have come with, changed the drive-ability of it dramatically. A few days later I got the SOLO High Flow Cats and Magnaflow full Catback exhaust in. At the same time I got the RK Sport diffuser installed. Thought it looked great and went well with my darked tail lights. I liked it quite a bit better than the stock diffuser. The car felt like it indeed gained a few ponies from the SOLO and Magnaflow. The sound was much improved over the shitty exhaust note from the stock mufflers. NOW I have a sports car haha.
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
08-23-2013, 07:02 PM | #7 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
Towards the last two weeks of my summer break I finally got the finishing touches on. NLP spoiler came first...
The final parts came with the ACS T5 Splitter and some Sylvania zXe bulbs... Can't say enough good things about Geoff from NLP, worked his butt off to help me get all of my ACS parts and his NLP spoiler painted and readied for me by a local paint shop. Great guy in person as well. V8 guys in Florida NEED to see this guy, has a sweet LS engine shop. So far I am at a bit of a stand still, and for good reason, I have my first semester at UF ahead of me. I was just ecstatic to get all these mods on before the school grind started. Next up will be testing for the JacFab 1/2 manifold spacer. We'll see how it goes, planning to get the dyno at NLP to see if Jason has a gold mine of a mod or not. I'll keep this build thread updated as much as I can. Photo-shoot coming soon!
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
08-23-2013, 08:56 PM | #8 |
Looks good. I like the overall look of a good short throw shifter. It has a nice traditional look. Sucks your car got hit though. I just got mine out of the shop from being sideswiped.
|
|
08-24-2013, 03:47 AM | #9 |
SoCal HT5
Drives: 2010 SS , 2014 SS Join Date: Sep 2011
Location: Muscat-Oman
Posts: 1,472
|
A great build
|
08-25-2013, 04:09 PM | #10 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
Thanks guys! Accidents suck, especially when you've got so much money invested in these things.
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
11-07-2013, 10:32 PM | #11 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
So, for an update, got a dyno done, here are the results....
Went to Next Level Performance today to get some dyno runs performed by Geoff. Want to thank Geoff for helping me procure the results and giving me a slight break on pricing. If anyone is in the Orlando area looking for a dyno, he's your man! I tested JacFab's possible spacer products as well. All info is below and can also be found in the spacer thread here http://www.camaro5.com/forums/showth...=307431&page=6 My best run showed a peak hp number of 277.65. My performance mods are K&N Intake, Vmax Throttle Body, High Flow Cats, and Magnaflow Catback. SEE VIDEO HERE https://www.facebook.com/photo.php?v=10200977861395466 I think the results were pretty good. Conditions: 85 degrees F, 40% Humidity, 29.81 in-Hg 3/4" Spacer, BLUE (Run File 8), Max HP: 270.08, Max TQ: 241.59 NO Spacer, RED (Run File 5), Max HP: 277.65, Max TQ: 238.33 1/2" Spacer, GREEN (Run File 2), Max HP: 267.56, Max TQ: 239.31 HORSEPOWER TORQUE AIR/FUEL
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
11-07-2013, 10:34 PM | #12 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
The JacFab 3/4 inch spacers will probably be staying on. They provide greater power AND torque in my normal rpm range.
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
01-22-2014, 10:37 PM | #13 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
Another updated photo up top
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
01-22-2014, 11:51 PM | #14 |
Drives: Supercharged LLT Join Date: Aug 2012
Location: San Antonio, Texas
Posts: 1,437
|
Nice build . Like what you done with the car
|
|
|
|
|