07-16-2013, 06:37 PM | #57 |
Account Suspended
Drives: 2010 camaro ss Join Date: Nov 2012
Location: Richmond Hill, GA
Posts: 726
|
unobtanium fabs some nice ones. do a search
|
07-16-2013, 07:36 PM | #58 |
Drives: 2012 ZL1 Join Date: Dec 2011
Location: pittsburgh area
Posts: 1,426
|
Gotcha. I've seen his and they are awesome. Didn't know if there was any other options
__________________
2012 CTF ZL1-stock
2012 ZL1 (sold) JRE 75rwhp kit catless ported lsa TB 11.04 @ 128.35 on hoosier drs and skinnies @ PRP with 1100DA |
07-16-2013, 08:52 PM | #59 |
Account Suspended
Drives: 2010 camaro ss Join Date: Nov 2012
Location: Richmond Hill, GA
Posts: 726
|
I made my own, so I don't know what to tell you there. Just some leftover rollcage tubing.
|
07-16-2013, 08:58 PM | #60 |
Drives: 2012 ZL1 Join Date: Dec 2011
Location: pittsburgh area
Posts: 1,426
|
Got anymore left over? LOL. I don't have the skill to do that sadly
__________________
2012 CTF ZL1-stock
2012 ZL1 (sold) JRE 75rwhp kit catless ported lsa TB 11.04 @ 128.35 on hoosier drs and skinnies @ PRP with 1100DA |
07-17-2013, 10:11 AM | #61 |
Drives: 2013 Chevy Camaro 2LT 3.6 V6 Join Date: Apr 2013
Location: United States
Posts: 715
|
Spare tire?
__________________
Seriously Sinning - "Veronica" Commandment 11 - Thou shall not travel slowly. |
07-17-2013, 08:25 PM | #62 |
chevy pride
|
find u some square tubing or round and have mounts put on the ends. they are simple easy to fab something up. i took mine off and its fairly straight design with a light bend and mounting plates. i know , i know its not safe but **** it. thats about 40+ lbs . if i wreck it its probably gonna be bad anyway lol.
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
07-19-2013, 05:00 AM | #63 | |
Drives: 13' 1LE Join Date: Apr 2012
Location: Canada
Posts: 2,640
|
Quote:
__________________
13' 1LE
Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me. |
|
08-19-2013, 04:26 PM | #64 |
chevy pride
|
need some help guys, im pulling out some weight and so far ive got
17 lb braille 20 lb driver and passenger seats front and reat bumper supports front sway bar and end links the spare tire hole is cut out and flat now got the exhaust about right under the front seats. i have a magnaflow 2.5 comp series exhaust and i just used the resonated x pipe . so it wont be so loud . just using the front section atm... need more ideals that wont ruin the car. like stuff u cant see. my next move is littles for the front. i dont make bank so i have to keep things cheap for now.
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
08-19-2013, 05:40 PM | #65 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
what your weight as of now? Am try to cut some also after the S/C and the 4l80 trans I was at 4180
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
08-20-2013, 08:12 AM | #66 |
chevy pride
|
Not sure , but I'm guessing about 200 or so less ATM. I'm gonna find somewhere to weigh the car soon
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
08-20-2013, 01:29 PM | #67 |
Drives: cars Join Date: May 2011
Location: Oversneeze
Posts: 4,544
|
Pull up the carpet and remove the sound insulation. Free except for time. Rear seat can be pulled and put back in whenever. Windshield washer bottle/pump/lines.
|
08-20-2013, 01:45 PM | #68 |
chevy pride
|
i can do the carpet, good ideal. i got the windshield stuff out and the fuse box moved , the + terminal under the hood all that is gone aswell.
how hard are the dashes to pull?
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
08-20-2013, 02:10 PM | #69 |
Account Suspended
Drives: camaro ss Join Date: Aug 2013
Location: savannah
Posts: 25
|
Not hard. getting them back in and lined up so all the bolts and push tabs match, however...
|
10-04-2013, 11:06 AM | #70 |
Emerald Coast Camaros
Drives: 2010 RS/SS Rally Yellow & 68 SS Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,814
|
My weight was not as bad as I thought. Dug up my old weight ticket from 8/13/12 it's 4120lb. Been cutting weight all summer got it down to 3760lb and going for more. Both are with out me and a 1/2 tank of gas.
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135 AS OF 1/31/15 @ 633 RWHP=10.16@135 AS OF 1/29/16 @ 633 RWHP=10.10@136 TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Official 1/8 Mile (V8) 2010+ Camaro Fast List | Merc | Dragstrip and Launch Techniques Discussion | 763 | 08-12-2022 04:51 PM |
Cost-Effective Camaro Weight Reduction | CamaroFemme | 5th Gen Camaro SS LS LT General Discussions | 34 | 12-21-2010 10:52 PM |
weight reduction options | 2K05GT | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 24 | 12-18-2010 08:05 AM |
weight loss | CamaroSpike23 | Off-topic Discussions | 8 | 09-17-2009 07:16 PM |
Camaro Weight | JeepinMatt | 5th Gen Camaro SS LS LT General Discussions | 62 | 03-26-2008 09:17 AM |