Spoiler install hose my stripes? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

lostinvt · 08-22-2009, 07:49 PM

So I'm debating about adding on a factory spoiler to my 2LT....really like the look of it....but I'm not sure where it will sit on my decklid with relation to my stripes....is it going to be OK, or do you think it's going to cover them slightly?

Sir Nuke · 08-22-2009, 07:59 PM

I think they will be covered, but all you need do is get the stripes done up the spoiler.

Primus · 08-23-2009, 07:44 AM

I just put my stripes on yesterday. Yes, it will cover part of those stripes where the pinstripes are on the back.

PieNsky · 08-23-2009, 07:48 AM

I'm glad when I pre-ordered my Camaro, the dealer didn't put on his decal.

Sixtyniner · 08-23-2009, 08:06 AM

It won't matter on the pin stripes the spoiler vinyl picks up where the spoiler covers the deck lid.

Primus · 08-23-2009, 01:04 PM

Are those bubbles in the vinyl?

traip93 · 08-23-2009, 09:37 PM

I'm interested to see how this turns out..I'm looking to do the same thing

lostinvt · 08-24-2009, 06:24 AM

Nope, no bubbles...it, of course, decided to start to rain as I was finishing my Zaino fun in the 95 degree heat!

So sixtyniner, you're the only one saying that I might make out OK....do you have any pics? I'm even trying to find a great shot of the spoiler placement to compare.....

CamaroSkooter · 08-24-2009, 08:13 AM

Which spoiler are you going for? The factory spoiler for the SS or RS equipped vehicles, or the high-wing spoiler?

If you're going with the factory spoiler, it's going to require drilling holes (a couple through the vinyl I might add) and it will absolutely cover up the back edges of the rally stripes. To get the stock look, you'll need the extra pieces of the rally stripe set that complete the stripes up onto the spoiler.

There's probably some photos of your exact color scheme in the official Yellow Camaro thread found here:

http://www.camaro5.com/forums/showthread.php?t=5214

You can kind of see it in the last picture of post # 65 on page 3 or check out post # 195 on page 8.

lostinvt · 08-24-2009, 08:32 AM

Thanks, seems like a few different opinions....yes, I was planning on the factory spoiler I think. If I get the spoiler stripe sections, do you think those will work, or will I need to redo the trunk stripes too?

CamaroSkooter · 08-24-2009, 08:36 AM

You should just need the spoiler stripes. The parts department should be able to get those for you and installing them shouldn't be difficult at all.

Karnage541 · 08-24-2009, 02:07 PM

Ahh man you let the dealer put there sticker on the back?

lostinvt · 08-24-2009, 02:13 PM

Well the oringal plan wasnt to get the spoiler

08-22-2009, 07:49 PM	#1
lostinvt Serial #589! Drives: 2010 2RS/SS Join Date: Aug 2009 Location: Bergen County, NJ Posts: 85	Spoiler install hose my stripes? So I'm debating about adding on a factory spoiler to my 2LT....really like the look of it....but I'm not sure where it will sit on my decklid with relation to my stripes....is it going to be OK, or do you think it's going to cover them slightly? Attached Images

08-22-2009, 07:59 PM	#2
Sir Nuke Master of All Things Drives: '20 Corvette Stingray Join Date: Jul 2009 Location: Southeast of Houston, Texas Posts: 22,332 View My Garage	I think they will be covered, but all you need do is get the stripes done up the spoiler. __________________

08-23-2009, 07:44 AM	#3
Primus 2G1FF1EV0A9113319 Drives: 2010 1LT/RS 6MT Join Date: Oct 2008 Location: St. Louis, MO Posts: 1,139 View My Garage	I just put my stripes on yesterday. Yes, it will cover part of those stripes where the pinstripes are on the back. __________________ 2010 Camaro 1LT/RS M6 Black 1100: 10/13/2008 2000: 4/02/2009 3000: 4/08/2009 3300: 5/14/2009 3400: 5/21/2009 3800: 5/28/2009 VIN: 2G1FF1EV0A9113319 4000: 5/28/2009 4150: 5/28/2009 4B00: 5/28/2009 Delivered: 6/10/2009

08-23-2009, 08:06 AM	#5
Sixtyniner Member Drives: 010 2SS/LS3 Join Date: May 2009 Location: Oconomowoc, Wisconsin Posts: 124	It won't matter on the pin stripes the spoiler vinyl picks up where the spoiler covers the deck lid. __________________ ____________________________ *Sixtyniner* VR 2SS/RS LS3 Pace Setter LT Headers Magnaflow 3" Comp Exhaust MSD Wires Roto-Fab CAI Hurst Short Throw Tune - Speed Inc. BMR 4 pt Strut Tower Brace

08-23-2009, 01:04 PM	#6
Primus 2G1FF1EV0A9113319 Drives: 2010 1LT/RS 6MT Join Date: Oct 2008 Location: St. Louis, MO Posts: 1,139 View My Garage	Are those bubbles in the vinyl? __________________ 2010 Camaro 1LT/RS M6 Black 1100: 10/13/2008 2000: 4/02/2009 3000: 4/08/2009 3300: 5/14/2009 3400: 5/21/2009 3800: 5/28/2009 VIN: 2G1FF1EV0A9113319 4000: 5/28/2009 4150: 5/28/2009 4B00: 5/28/2009 Delivered: 6/10/2009

08-23-2009, 07:48 AM	#4
PieNsky Drives: Victory Red 1LS Join Date: Nov 2008 Location: Louisville,KY Posts: 1,929 View My Garage	I'm glad when I pre-ordered my Camaro, the dealer didn't put on his decal.

08-23-2009, 09:37 PM	#7
traip93 Drives: Ralley Yellow, Black Sripes 2L Join Date: Aug 2009 Location: North of Atlanta Posts: 72	I'm interested to see how this turns out..I'm looking to do the same thing __________________ Chad 2Lt

08-24-2009, 06:24 AM	#8
lostinvt Serial #589! Drives: 2010 2RS/SS Join Date: Aug 2009 Location: Bergen County, NJ Posts: 85	Nope, no bubbles...it, of course, decided to start to rain as I was finishing my Zaino fun in the 95 degree heat! So sixtyniner, you're the only one saying that I might make out OK....do you have any pics? I'm even trying to find a great shot of the spoiler placement to compare.....

08-24-2009, 08:13 AM	#9
CamaroSkooter Retarded One-Legged Owl Drives: 2010 Black Camaro 2SS Join Date: Oct 2008 Location: San Antonio, TX Posts: 9,745	Which spoiler are you going for? The factory spoiler for the SS or RS equipped vehicles, or the high-wing spoiler? If you're going with the factory spoiler, it's going to require drilling holes (a couple through the vinyl I might add) and it will absolutely cover up the back edges of the rally stripes. To get the stock look, you'll need the extra pieces of the rally stripe set that complete the stripes up onto the spoiler. There's probably some photos of your exact color scheme in the official Yellow Camaro thread found here: http://www.camaro5.com/forums/showthread.php?t=5214 You can kind of see it in the last picture of post # 65 on page 3 or check out post # 195 on page 8.

08-24-2009, 08:32 AM	#10
lostinvt Serial #589! Drives: 2010 2RS/SS Join Date: Aug 2009 Location: Bergen County, NJ Posts: 85	Thanks, seems like a few different opinions....yes, I was planning on the factory spoiler I think. If I get the spoiler stripe sections, do you think those will work, or will I need to redo the trunk stripes too?

08-24-2009, 08:36 AM	#11
CamaroSkooter Retarded One-Legged Owl Drives: 2010 Black Camaro 2SS Join Date: Oct 2008 Location: San Antonio, TX Posts: 9,745	You should just need the spoiler stripes. The parts department should be able to get those for you and installing them shouldn't be difficult at all.

08-24-2009, 02:07 PM	#12
Karnage541 Drives: 2010 VR 1LT/RS Camaro Join Date: Jun 2009 Location: New Jersey Posts: 104	Ahh man you let the dealer put there sticker on the back? __________________ 1LT/RS Was i burning out?

08-24-2009, 02:13 PM	#13
lostinvt Serial #589! Drives: 2010 2RS/SS Join Date: Aug 2009 Location: Bergen County, NJ Posts: 85	Well the oringal plan wasnt to get the spoiler

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help! Developing Bumblebee stripes	Ghost Rider	Cosmetics and Lighting Modification Discussions	18	08-07-2009 08:03 PM
IOM back from the paint shop with stripes!!!	surferbarney	Camaro Photos \| Spyshots \| Video \| Media Gallery	67	06-30-2009 12:38 PM
RJT meets SIM (Custom Stripes)	Tecca	Cosmetics and Lighting Modification Discussions	37	06-19-2009 11:04 PM
The Day Has Finally Arrived - Round 3 - Black Rally Stripes!!	Embalmer	Camaro Photos \| Spyshots \| Video \| Media Gallery	73	04-26-2009 08:48 PM
Fbodfather HELP definitive answer on REAR spoiler stripes?	CoolestCamaro873	5th Gen Camaro SS LS LT General Discussions	98	01-31-2009 07:42 AM