05-06-2016, 03:19 PM | #1 |
"Cam Only"
|
FS: OEM 1LE front and rear sway bars
Selling OEM 1LE front and rear sway bars off of a 2013 1LE with very few miles on it.
These have just been sitting in my office for a year, never have gotten around to installing them. I'd rather just sell them. Looking to get $200 local pickup. Or buyer pays shipping. I accept paypal. Can be delivered anywhere between Santa Barbara to Calabasas.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) Last edited by Jeff_SS; 02-11-2018 at 12:35 PM. |
05-06-2016, 07:56 PM | #2 |
Drives: 2012 SS/RS MN6 Join Date: Mar 2016
Location: Covington Ga
Posts: 783
|
Dang, I was about to post mine lol. I'll wait a few days. GLWTS
|
05-06-2016, 10:13 PM | #3 | |
"Cam Only"
|
Quote:
But thank you if you're being polite.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
|
11-22-2017, 06:29 PM | #4 |
"Cam Only"
|
Bump. Still got them sitting in my office. Want them gone..
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
12-04-2017, 11:31 PM | #5 |
Taeng
|
Do they fit a 2012 Camaro V6? I'm interested in the front sway bar if you're willing to separate. I live the San Gabriel valley just east of LA. Thanks!
__________________
|
12-09-2017, 08:08 PM | #6 |
"Cam Only"
|
Not interested in separating unless I have someone lined up for both.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
02-11-2018, 11:11 AM | #7 |
"Cam Only"
|
Bump
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
02-11-2018, 11:57 AM | #8 |
Account Suspended
Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017
Location: California
Posts: 1,694
|
Also try listing them on OfferUp you will probably get a lot of bites. I recently just picked up a set of 2015 ZL1 sway bars front and back for $100
|
03-05-2018, 08:32 PM | #9 |
Drives: 2013 1SS Join Date: Oct 2017
Location: Tampa
Posts: 31
|
how much is shipped to 33760
|
03-05-2018, 08:42 PM | #10 |
"Cam Only"
|
$290 shipped.
They’re big obviously so shipping from California to FL isn’t cheap..
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
03-05-2018, 09:28 PM | #11 |
Drives: 2013 SS Camaro Join Date: Feb 2018
Location: SoCal
Posts: 76
|
Does the mounting hardware come with it?
Also shipped to 92064 |
03-05-2018, 11:30 PM | #12 |
Drives: 2013 1SS Join Date: Oct 2017
Location: Tampa
Posts: 31
|
pm'ing you now
|
03-05-2018, 11:33 PM | #13 |
Drives: 2013 1SS Join Date: Oct 2017
Location: Tampa
Posts: 31
|
i tryed pm'ing but it wont let me i am interested text me 6317696040
|
03-07-2018, 10:27 PM | #14 | |
"Cam Only"
|
Quote:
$268 shipped to that zip.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
|
|
|
|
|