05-04-2013, 07:30 AM | #1 | ||
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
ADM BUILDS ZL1 417 CID STEALTH (1100HP build)
As the title says,We had to build a car that would not throw attention to what lies underneath,but it had to be big.
The customer requested that the only way he would allow us to do this job is i he could hand the keys to his wife and she never knew anything was done...Wifes know all...Or do they? We startd with a Brand new 2013 Black Zl1 Automatic(wife approval). Recipe: ADM BUILT 417 - CALLIES CRANK,FORGED RODS ,FORGED PISTONS ADM STAGE 2 HEADS ARP HEAD STUDS LPE GT-11 (STEALTHY CAM) STOCK ROCKERS STOCK PUSHRODS STOCK OIL PUMP 3 BOLT CAM GEAR AND DAMPNER BLOCK STOCK TORQUE CONVERTER(WIFE APPROVED) STOCK 1.9 LITER BLOWER 2.55 PULLEY UPPER 9.55 LPE RING LPE DAMPNER ADM RACE INTAKE WITH WASHER BOTTLE ADM HD HEAT EXCHANGER AUTOCAL BY EFILIVE FOR 3 TUNES(93 OCTANE,114OCTANE,NITROS) STAINLESS WORKS SP HEADERS ADM EXHAUST CONTROL(KEEPS FLAPS CLOSED) ID 850 INJECTORS ADM DUAL FUEL PUMP SYSTEM 1000+HP KENNEBELL DUAL 20VOLT BOOSTAPUMP WELDON REGULATOR ADM LINE LOCK ADM SPRAYBAR DIRECT PORT BLOWER SPACER NITROUS SYSTEM REMOTE BOTTLE OPENER LPE NITROS CONTROLLER ADM PURGE SYSTEM NGK TR7IX PLUGS STOCK TIRES STOCK GEARS OPTIMA DEEP CYCLE BATTERY 100% HIDDEN INSTALL POSSIBLY WELD AND HOOSIER DRAG PACK Enjoy Quote:
Last edited by ADM PERFORMANCE; 05-04-2013 at 09:39 AM. |
||
05-04-2013, 07:36 AM | #2 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
We start by making room
In order to install a nitros system completey hidden we had to creat room.
We start by removing the factory battery and tray. We then move on to coming up with a good sealed battery that would allow fitimint of a nitros bottle in the very center of the battery well.We found one that would take the demand of all the electronics required in a car this demanding.Optima makes a Very thin Yellow top that will lay flat..we got it on order and now time to build the mount. Last edited by ADM PERFORMANCE; 05-04-2013 at 09:40 AM. |
05-04-2013, 07:55 AM | #3 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Move on to the engine
Now that we have somone on the car ,Its time for me to build the engine.
Out with the old: While the original is getting disassembled I moved forward : |
05-04-2013, 09:00 AM | #4 |
Drives: Silver SS/RS, Man 6 Join Date: Apr 2009
Location: DFW area, Texas
Posts: 884
|
ADM SPRAYBAR DIRECT PORT BLOWER SPACER NITROUS SYSTEM
Can you elaborate a little on what this is?
__________________
Silver 2SS/RS Man/6
CTS-V front 6-Piston Calipers, GM 3.91 Rear Gears |
05-04-2013, 09:41 AM | #5 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
|
05-04-2013, 09:47 AM | #6 |
Drives: C6 Z06 Join Date: Jan 2010
Location: Dayton, MD
Posts: 1,645
|
|
05-04-2013, 10:32 AM | #7 |
Drives: 2013 ZL1 Join Date: Oct 2012
Location: Dubai
Posts: 757
|
whats this exhaust thing that keeps the valves shut, do they stay shut the whole time, or is the mode selectable?
__________________
1150bhp Whipple 4.0 Supercharged 427ci Camaro ZL1 |
05-04-2013, 11:01 AM | #8 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
|
05-07-2013, 12:16 AM | #9 |
Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010
Location: Alberta
Posts: 1,408
|
Subscribed.
|
05-07-2013, 10:11 AM | #10 |
5Th Gen (Craig)
|
Subscribed
__________________
2014 C7
|
05-07-2013, 06:52 PM | #11 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
So we have progress
Moving forward we can now get into the good stuff.
ADM Fuel system Sent from my iPhone 6 Last edited by ADM PERFORMANCE; 05-07-2013 at 08:31 PM. |
05-07-2013, 08:09 PM | #12 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Progress
Last edited by ADM PERFORMANCE; 05-07-2013 at 08:41 PM. |
05-07-2013, 09:01 PM | #13 |
Drives: Anything I want Join Date: Oct 2008
Location: DfW - Texas
Posts: 5,405
|
Wiring
Last edited by ADM PERFORMANCE; 05-07-2013 at 09:22 PM. |
05-07-2013, 09:06 PM | #14 |
|
As usual, great work Andy!!
Sent from Camaro21's Tapatalk |
|
|
|
|