Elite Engineering's Catch Can and Clean-Side Oil Separator

[Elite Engineering]

Elite Engineering's Catch Can and Clean-Side Oil Separator: $99.00

Elite Engineering, the leader in Oil PCV Catch Can solutions announces the latest addition to their proven line of oil separating Catch Cans with the "Elite Clean Side solution".

The Clean-side solution addresses that small amount of oil vapor that enters the intake air charge upstream of the throttle body during WOT operation when the intake manifold vacuum is not present.

The Clean-side solution allows 100% MAF metered air entry while trapping the oil during wide open throttle operation and allowing it to return back into the valve cover as soon as the throttle is lifted.

Simply installs as a direct replacement for your stock Oil Fill Cap allowing you to delete and replace the stock OEM hose.

At 1/2 the cost of the plastic hollow GM unit, our aluminum clean-side separator incorporates an internal coalescing material. Simply unscrew the top for a quick inspection or cleaning.

Available in the most popular color Black, chrome, or any other popular color to match your exterior. More Pictures coming soon!

This is a direct replacement for your stock Oil Fill Cap. Comes with vacuum caps and fittings if needed to connect to your intake air inlet tube.
Models for both the V8 AND V6 Camaro engines.

Added to the Elite original Catch Can, or New E2 Catch Can, this is your COMPLETE PCV Oil Ingestion Solution.

Do it once, and do it right!

Elite Engineering Catch Can: Often Imitated, but never Duplicated!

[Elite Engineering]

For those that are still trying to gain a better understanding of the PCV System, here's a good video:

[Elite Engineering]

All, thanks for your orders and your patience. We're on schedule to ship all orders complete next week.

Again, thank you and have a nice weekend

[Elite Engineering]

All orders through today should be shipped.

Thanks for all the support