03-02-2014, 10:14 AM | #57 |
SoCal Camaro5 Race Team
Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010
Location: SO CAL
Posts: 14,287
|
Nice mods! Pedals look familiar to.
|
03-02-2014, 11:01 AM | #58 |
Noice!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
__________________
2010 Camaro 2SS/RS | RotoFab CAI | ARH 1 7/8" LT Headers w/ HFC | SW Retro Exhaust | ZL1 Shifter | Ridetech Coilovers | FE4 conversion | UMI toe rods & trailing arms | Prothane Subframe & UCA bushings | Detroit Speed sways | Forgestar F14 wheels | ZR1 Blue Calipers | Tuned by ADM Performance SSeric's Build Thread |
|
05-04-2014, 02:07 PM | #59 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Went to the Drag Strip yesterday to try out the new line-lock and drag radials. The first couple times I got some not so good burnouts. Too much going on and I didn't have any routine down. After a couple runs though I start getting my mind/routine down and got some better burnouts. I still need some more seat time and probably should start out in 2nd gear for the burnouts next time.
I'm also trying to find the sweet spot for launching now. I got up to around 4200 RPM launches but might go up to 4500 next time since I didn't have any bogging or much spinning. All in all I picked up a consistent .3 tenths in the 1/8th though. I've had an 8.24 run before on street tires but that was a one time deal. Typically I would run 8.4 time frame on a normal basis. With drag radials I was consistently running 8.1 time frame with a best of 8.14. Based on some calculations I found that should be about a 12.70 in the 1/4 mile. I think with more time with the drag radials and better burnout/launches I should be able to get into the 8.0 area. I also need to learn to work the line-lock on the line a little so I can get away from the red lights. This was my only red light of the night though.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal Last edited by caverman; 06-20-2014 at 10:38 PM. |
06-27-2014, 09:36 PM | #60 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
ADM solid cradle bushings and carbon upper control arm bushings.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
11-14-2014, 10:08 AM | #61 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
|
|
|
|
|