05-27-2010, 08:00 AM | #393 |
Hail to the GENERAL
|
GMPP Intake
Anyone has any info on the GMPP intake? HP and torque gain? fit and finish?
__________________
Since the launch of the Camaro in 09, I've been dreaming of buying this car and finally today is the day. ORDER PLACED on 05/18/2010 for 2011 2LT CGM
(3300) Order scheduled for production, TPW 06/14/2010 [05/26/2010] (3400) Order broadcast [06/15/2010] (3800) Order produced [06/18/2010] Available to ship from Osh [06/17/2010] In-Transit from Osh [06/29/2010] Available to ship from rail yard [07/08/2010] Delivered [07/12/10] |
05-30-2010, 12:33 AM | #394 | |
Camaro Enthusiast
Drives: 2010 Camaro SS, 2012 Silverado LTZ Join Date: Jan 2009
Location: Ohio
Posts: 400
|
Quote:
Did you get a chance to add any other intakes to the list on the Dyno day? I am looking to see results from K&N. Mike
__________________
|
|
05-30-2010, 11:55 AM | #395 |
Drives: 2010 Camaro SS Join Date: May 2010
Location: Phila,Pa.
Posts: 557
|
This is still alittle tuff to pick a winner, The car isnt moving
I dont care how many blue blowers u put in front of the dyno the car is still not moving down the track and that WILL play a factor... Most kits are within a few HP of each other and a few of them are junk.. Still it was nice of Jannetty to test them out, I applaud them for the testing
__________________
SOLD
2010 Camaro 1SS/A6 12.59@111.31 Magnaflow Magnapack Axleback & Resonated X-Pipe/OBX LT Headers/Airaid Cold Air Kit/Injection Connection Tuned Last edited by JS; 05-30-2010 at 09:48 PM. |
05-30-2010, 02:24 PM | #396 |
TRI-COUNTY CAMARO... FTW!
Drives: 2010 Camaro 2SS M6 Cyber Grey Join Date: May 2010
Location: South Florida
Posts: 1,200
|
Installed my CAI, inc. cold air intake a couple of days ago and can't stop.... Very easy to install and looks great! Highly recommended(Thanks Jannetty for testing!)
__________________
CAI inc. cold air intake, LG G6x3 cam, Patriot Gold Extreme Dual springs, Titanium retainers and locks, LG SuperPro 1 7/8 Long Tube headers with full 3" exhaust, DynoMax VT mufflers, SLP 4" tips, Moroso catch can, Race Ready electronic exhaust cut outs, Full painted Razzi body kit, Headlight Armor Smoke taillight and marker blackouts, T-Rex aluminum upper and lower grille, Polished aluminum front and rear bowties. Professionally installed and Dyno Tuned by HorsePower Sales, Pompano Beach FL.
|
05-30-2010, 02:28 PM | #397 |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
Rage:
I put the CAI intake in mine too. It was the first mod I did. I love it! Thanks to Jannetty for helping us all decide which intake is best for us. |
05-30-2010, 02:31 PM | #398 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
|
05-30-2010, 02:48 PM | #399 | |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
Quote:
I'm also looking forward to seeing my wheels. They were supposed to ship about a week ago, but the manufacturer sent me a note to tell me there was a minor blemish in the paint on one rim and they had to send it back to be fixed. I'd much rather they do that than for me to find it and have to ship it back. |
|
05-31-2010, 10:39 AM | #400 |
Drives: 2010 SS Camaro Join Date: Mar 2010
Location: North Carolina
Posts: 42
|
So what about the Halltech Yellow Jacket??? I know this is an older post but anyone run any kind of tests such as these with a Halltech Yellow Jacket? Was looking at this and it supposedly puts out 14rwhp and 10lbstq and costs around $369, would like to see what others have to say about this.
__________________
2010 SS Camaro/6.2L-V8
Magnaflow Competition Series Axle-Back, Vararam Air Intake, Black bow ties, tinted tailights and side lights and reverse lights, Blacked out head lights, brushed super sport fuel door, blacked out SS logos front and rear. Boss 339 Black Rims with Red Bezel. Next: American Racing Headers, Vengeance Stage III Cam. Red halos Last: Vortech V-7ysi Supercharger, Body kit |
05-31-2010, 05:03 PM | #401 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Quote:
They are available on my site. Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
05-31-2010, 05:41 PM | #402 |
Drives: me up the wall. Join Date: Dec 2009
Location: Lakewood, CA
Posts: 471
|
Hey Ted,
any thoughts on the forthcoming Airaid V2 tubes? Retest maybe? |
05-31-2010, 06:10 PM | #403 | |
Drives: Black 2SS/RS LS3 Join Date: Feb 2010
Location: Canada
Posts: 265
|
Quote:
thanks |
|
05-31-2010, 06:15 PM | #404 |
Hail to the GENERAL
|
Sorry if someone has asked this beforen but quick question, do anyone has numbers and dyno results for the GMPP air intake. I heard from a guy that installed a GMPP intake on his Cobalt SS that it made a difference of around 4-8 hp and he can feel it, any one knows about the Camaro V6?
Thanks folks
__________________
Since the launch of the Camaro in 09, I've been dreaming of buying this car and finally today is the day. ORDER PLACED on 05/18/2010 for 2011 2LT CGM
(3300) Order scheduled for production, TPW 06/14/2010 [05/26/2010] (3400) Order broadcast [06/15/2010] (3800) Order produced [06/18/2010] Available to ship from Osh [06/17/2010] In-Transit from Osh [06/29/2010] Available to ship from rail yard [07/08/2010] Delivered [07/12/10] |
05-31-2010, 06:50 PM | #405 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
I actually have to get through the V6 Testing first then maybe in the Fall.
Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
06-01-2010, 07:45 AM | #406 | |
Hail to the GENERAL
|
Quote:
__________________
Since the launch of the Camaro in 09, I've been dreaming of buying this car and finally today is the day. ORDER PLACED on 05/18/2010 for 2011 2LT CGM
(3300) Order scheduled for production, TPW 06/14/2010 [05/26/2010] (3400) Order broadcast [06/15/2010] (3800) Order produced [06/18/2010] Available to ship from Osh [06/17/2010] In-Transit from Osh [06/29/2010] Available to ship from rail yard [07/08/2010] Delivered [07/12/10] |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hot air Intakes -By Kenne bell | ADM PERFORMANCE | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 66 | 02-08-2011 08:33 PM |
aFe Stage 2 Cold Air Intake NOW SHIPPING from ECSpeedSound! | AJ@ECSMotorsports | V8 Bolt-Ons & Tunes | 44 | 11-13-2010 03:45 PM |
List of Intakes that will work with the TVS-2300 MagnaCharger | JJ2010 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 26 | 03-19-2010 02:11 AM |
Pedders Suspension Benchmark Track Testing and New Jersey Track Day | Info@PeddersUSA.com | USA - NY / NJ / PA | 35 | 10-26-2009 05:20 PM |
Cold Air Intake | xsofa | 4th Generation Camaros | 2 | 08-13-2009 05:40 AM |