02-10-2017, 08:14 PM | #1 |
Drives: 2010 2SS/RS Join Date: Jul 2014
Location: Ma
Posts: 476
|
SOLD Forgestar F14 $750
Got rid of my camaro and have a set of Forgestar F14's laying around. Three wheels are in very good condition and one wheel has some curb rash. Fronts do not have tires at this point as they were traded in with the car, rear wheels have 315/35/20 pirwlli pzeros with maybe 3/32 left. TPMS and center caps included.
Wheels are deep concave 20x9.5 front and 20x11" rear in gunmetal finish. Would prefer pick up in Mass but if you are paying shipping cost, I would ship them. Here is the one wheel that has the curb rash so you know what it looks like, again other three wheels have no rash. wheels on car showing fitment, they sat pretty flush with fenders
__________________
Current car
2011 Backdraft RT3 427 stroker (DART block/ forged internals/ AFR 205 Aluminum heads/ Quickfuel 750) 600hp/590ftlbs, wilwood brakes, custom JRI double adjustable shocks. Weighs in at 2300 lbs.... Use to have 2010 Camaro SS - ECS SC 1500, Kooks LTH + HFC, Corsa, CTS-V brakes, Detroit Speed Coilovers, BMR sways (FE4 conversion), DSE endlinks, BMR toe rods and trailing arms, Forgestar F14's Last edited by Mike_G; 02-27-2017 at 05:47 PM. |
02-11-2017, 11:24 AM | #2 |
PM sent
|
|
02-11-2017, 03:32 PM | #3 |
I'm your huckleberry...
Drives: '10 2SS/RS, '88 IROC vert Join Date: Sep 2010
Location: Seattle
Posts: 548
|
Oh FFS I am drooling. Don't have my tax return yet. :(
__________________
'88 IROC-Z vert (14.9 @ 92.3) //
'10 2SS/RS LS3 - 423 RWHP, 418 RWTQ |
02-12-2017, 07:57 PM | #4 |
Drives: 2021 Camaro ZL1 Join Date: Sep 2016
Location: Long Island
Posts: 114
|
Not a bad deal even with having to get them redone. Know the offsets?
Sent from my iPad using Tapatalk |
02-12-2017, 09:38 PM | #5 |
Drives: 2010 2SS/RS Join Date: Jul 2014
Location: Ma
Posts: 476
|
Not sure on the offsets, they sit pretty flush with fenders, they are the typical offsets for this size setup. Also only one wheel would need some refinishing if you wanted the set in perfect condition.
__________________
Current car
2011 Backdraft RT3 427 stroker (DART block/ forged internals/ AFR 205 Aluminum heads/ Quickfuel 750) 600hp/590ftlbs, wilwood brakes, custom JRI double adjustable shocks. Weighs in at 2300 lbs.... Use to have 2010 Camaro SS - ECS SC 1500, Kooks LTH + HFC, Corsa, CTS-V brakes, Detroit Speed Coilovers, BMR sways (FE4 conversion), DSE endlinks, BMR toe rods and trailing arms, Forgestar F14's |
02-13-2017, 11:13 AM | #6 | |
Drives: 2010 Supercharged Camaro SS Join Date: Sep 2015
Location: Huntsville,AL
Posts: 52
|
Quote:
I'd like to get them, but shipping is probably really high to 35763? In Huntsville, AL. Don't think I know anyone who goes to Massachusetts.. |
|
02-15-2017, 06:08 PM | #7 |
Drives: 2010 2SS/RS Join Date: Jul 2014
Location: Ma
Posts: 476
|
Bump
__________________
Current car
2011 Backdraft RT3 427 stroker (DART block/ forged internals/ AFR 205 Aluminum heads/ Quickfuel 750) 600hp/590ftlbs, wilwood brakes, custom JRI double adjustable shocks. Weighs in at 2300 lbs.... Use to have 2010 Camaro SS - ECS SC 1500, Kooks LTH + HFC, Corsa, CTS-V brakes, Detroit Speed Coilovers, BMR sways (FE4 conversion), DSE endlinks, BMR toe rods and trailing arms, Forgestar F14's |
02-17-2017, 06:43 PM | #8 |
Drives: 2010 2SS/RS Join Date: Jul 2014
Location: Ma
Posts: 476
|
Sold
__________________
Current car
2011 Backdraft RT3 427 stroker (DART block/ forged internals/ AFR 205 Aluminum heads/ Quickfuel 750) 600hp/590ftlbs, wilwood brakes, custom JRI double adjustable shocks. Weighs in at 2300 lbs.... Use to have 2010 Camaro SS - ECS SC 1500, Kooks LTH + HFC, Corsa, CTS-V brakes, Detroit Speed Coilovers, BMR sways (FE4 conversion), DSE endlinks, BMR toe rods and trailing arms, Forgestar F14's |
02-26-2017, 08:25 AM | #9 |
02-26-2017, 09:51 AM | #10 |
Drives: 2010 Supercharged Camaro SS Join Date: Sep 2015
Location: Huntsville,AL
Posts: 52
|
|
02-26-2017, 01:07 PM | #11 |
Drives: 2010 2SS/RS Join Date: Jul 2014
Location: Ma
Posts: 476
|
Yes at the time of that picture it was detroit speed coilovers but I tried 4 different suspension set upd on this car, LG motorsports, ridetech, detroit speed for coilovers and BMR lowering springs koni yellows.
__________________
Current car
2011 Backdraft RT3 427 stroker (DART block/ forged internals/ AFR 205 Aluminum heads/ Quickfuel 750) 600hp/590ftlbs, wilwood brakes, custom JRI double adjustable shocks. Weighs in at 2300 lbs.... Use to have 2010 Camaro SS - ECS SC 1500, Kooks LTH + HFC, Corsa, CTS-V brakes, Detroit Speed Coilovers, BMR sways (FE4 conversion), DSE endlinks, BMR toe rods and trailing arms, Forgestar F14's |
02-27-2017, 06:12 AM | #12 |
Drives: 2013 2ss/rs A6 yellow !!!!! Join Date: Nov 2011
Location: Woodbine Maryland
Posts: 659
|
Price shipped to 21797 please
Sent from my iPhone using Tapatalk |
02-27-2017, 05:46 PM | #13 |
Drives: 2010 2SS/RS Join Date: Jul 2014
Location: Ma
Posts: 476
|
Sorry posted a while back that these sold, someone grabbed them on craigslist
__________________
Current car
2011 Backdraft RT3 427 stroker (DART block/ forged internals/ AFR 205 Aluminum heads/ Quickfuel 750) 600hp/590ftlbs, wilwood brakes, custom JRI double adjustable shocks. Weighs in at 2300 lbs.... Use to have 2010 Camaro SS - ECS SC 1500, Kooks LTH + HFC, Corsa, CTS-V brakes, Detroit Speed Coilovers, BMR sways (FE4 conversion), DSE endlinks, BMR toe rods and trailing arms, Forgestar F14's |
02-27-2017, 05:47 PM | #14 |
Drives: 2013 2ss/rs A6 yellow !!!!! Join Date: Nov 2011
Location: Woodbine Maryland
Posts: 659
|
Ok ty
Sent from my iPhone using Tapatalk |
|
|
|
|