02-16-2017, 10:52 PM | #1 |
Rear brake conversion?
Hello guys, just seeing if i could get some input on a drag pack set up for my 13 zl-1. I know the smallest we can fit on the rear without a conversion is 17", is there going to be a huge difference between 17 and 15" wheels? just trying to see if i can get away without spending an extra 1500 for a conversion kit. car currently makes 600 rwhp and i need to dead hook in the street. Thank you in advance for any info you veterans can give!!
|
|
02-20-2017, 12:54 PM | #2 |
GuitarmageddonZL1
Drives: ‘13 ZL1, ‘17 TT ZL1, ‘17 Silverado Join Date: Feb 2015
Location: Harrisburg, PA
Posts: 432
|
A 17x10.5 or 17x11 wheel with a 315/45/17 drag radial should work perfectly.
__________________
|
02-20-2017, 01:38 PM | #3 |
Sarcasm loading --------
|
I believe for 17" wheels you have to use the weld or bogart wheel made for the camaro with special lower control arms for clearance.
__________________
"The salesman actually told me to stop getting it sideways during the test drive"
2018 MBM ZL1 1LE - Stock 2014 CRT ZL1 574 rwhp, 537 rwtq - SOLD 2010 IBM SS Camaro VVT L99 w/ TR6060 swap, 489 rwhp, 444 rwtq - SOLD |
02-20-2017, 02:52 PM | #4 |
Snake Eater
Drives: 2012 AGM ZL1 Join Date: Oct 2011
Location: TN
Posts: 2,737
|
15" looks so good with so much meat though...
__________________
Build Thread: http://www.camaro5.com/forums/showth...95#post8351295
Make sure you don’t forget to subscribe to my channel! More content on the way. Like, share with your friends https://www.youtube.com/channel/UC9Z...sP2wjsLLFeP1zQ Follow me on instagram: http://www.instagram.com/snkeatr/ |
02-20-2017, 03:28 PM | #5 |
Drives: LSX FTW Join Date: Feb 2016
Location: Florida
Posts: 526
|
Go with a C5 z06 rear wheel or a front C6 Z06 wheel. if its just a track pack your looking for.
__________________
#Gapped
|
02-20-2017, 03:41 PM | #6 |
I did not know you needed to to change out the lca for the welds and bogarts, i thought that was mainly for 16" v6 brakes or the race star wheels? Anyone have more info on this?
|
|
02-20-2017, 04:09 PM | #7 |
Drives: 1967 Camaro BBC, 2014 Camaro ZL1 Join Date: Nov 2013
Location: Tiverton, Ontario, Canada
Posts: 114
|
|
04-27-2017, 04:27 PM | #8 |
little update for you guys I ended up going with 17x10.5 welds with the m/t et street r 305/45/17......... and let me tell you this animal dead HOOKS from a dig in the street!!!
|
|
04-28-2017, 12:57 AM | #9 |
Drives: 2013 zl1 Join Date: Jun 2015
Location: nj
Posts: 142
|
17'' welds here also didnt have to change or tie anything back
__________________
675RWHP 622RWTQ Jannetty Tuned
10.76 @ 131.6 1.6 0-60" |
|
|
|
|